Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2307.05720

Liquid distribution after head-on separation of two colliding immiscible liquid droplets

Johanna Potyka·Kathrin Schulte·Carole Planchette
View original source ↗Read source document ↗Export metadata ↓

Abstract

Head-on collisions of two immiscible liquid droplets lead to a collision complex, which may either remain stable in the form of a single compound drop, or fragment into two main daughter droplets. This paper investigates the liquid distribution developing in the two daughter droplets and which can be of three types. Either two encapsulated droplets (single reflex separation) form, or a single encapsulated drop plus a droplet made solely of the encapsulating liquid, which can be found either on the impact side (reflexive separation) or opposite to it (crossing separation). A large number of experimental and simulation data covering collisions with partial and total wetting conditions and with Weber and Reynolds numbers in the ranges of 2 - 720 and 66 - 1100, respectively, is analyzed. The conditions leading to the three mentioned liquid distributions are identified and described based on the decomposition of the collision in two phases: (i) radial extension of the compound droplet into a lamella and (ii) its relaxation into an elongated cylindrical droplet. In accordance with these two phases, two dimensionless parameters, $\Lambda = {\rho_i/\rho_o} {{We_i}^{-1/2}}$ and $N = {\nu_o/\nu_i}~{\sigma_{o}/\sigma_{io}}$, are derived, which are built on the collision parameters and liquid properties of the encapsulated inner droplet (i) and the outer droplet (o) only. In agreement with the proposed interpretation, the combination of these two parameters predicts the type of liquid distribution. The predictions are found to be in very good agreement with both experimental and numerical results.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Johanna Potyka, Kathrin Schulte, Carole Planchette. 2023-07-11. Liquid distribution after head-on separation of two colliding immiscible liquid droplets. https://doi.org/10.1063/5.0168080

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗