High efficiency coupling of free electrons to sub-$\lambda^3$ modal volume, high-Q photonic cavities

Malo Bézard; Imène Si Hadj Mohand; Luigi Ruggierio; Arthur Le Roux; Yves Auad; Paul Baroux; Luiz H. G. Tizei; Xavier Chécoury; Mathieu Kociak

arXiv · 2307.15556

High efficiency coupling of free electrons to sub-$\lambda^3$ modal volume, high-Q photonic cavities

Malo Bézard·Imène Si Hadj Mohand·Luigi Ruggierio·Arthur Le Roux·Yves Auad·Paul Baroux·Luiz H. G. Tizei·Xavier Chécoury·Mathieu Kociak

View original source ↗Read source document ↗Export metadata ↓

Abstract

We report on the design, realization and experimental investigation by spatially resolved monochromated electron energy loss spectroscopy (EELS) of high quality factor cavities with modal volumes smaller than $\lambda^3$, with $\lambda$ the free-space wavelength of light. The cavities are based on a slot defect in a 2D photonic crystal slab made up of silicon. They are optimized for high coupling of electrons accelerated to 100 kV, to quasi-Transverse Electrical modes polarized along the slot direction. We studied the cavities in two geometries. The first geometry, for which the cavities have been designed, corresponds to an electron beam travelling along the slot direction. The second consists in the electron beam travelling perpendicular to the slab. In both cases, a large series of modes is identified. The dielectric slot modes energies are measured to be in the 0.8- 0.85 eV range, as per design, and surrounded by two bands of dielectric and air modes of the photonic structure. The dielectric even slot modes, to which the cavity mode belongs, are highly coupled to the electrons with up to 3.2$\%$ probability of creating a slot photon per incident electron. Although the experimental spectral resolution (around 30 meV) alone does not allow to disentangle cavity photons from other slot photons, the remarkable agreement between the experiments and FDTD simulations permits us to deduce that amongst the photons created in the slot, around 30$\%$ are stored in the cavity mode. A systematic study of the energy and coupling strength as a function of the photonic band gap parameters permits to foresee increase of coupling strength by fine-tuning phase matching. Our work demonstrates free electron coupling to high quality factor cavities with low mode density, sub-$\lambda^3$ modal volume, making it an excellent candidate for applications such as quantum nano-optics with free electrons.

Explore related subjects

physics.optics

Keep this discovery

BibTeX RIS

Malo Bézard, Imène Si Hadj Mohand, Luigi Ruggierio, Arthur Le Roux, Yves Auad, Paul Baroux, Luiz H. G. Tizei, Xavier Chécoury, Mathieu Kociak. 2023-07-28. High efficiency coupling of free electrons to sub-$\lambda^3$ modal volume, high-Q photonic cavities. https://arxiv.org/abs/2307.15556

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗