SearcharxivSearch

arXiv · 2308.12246

Feasibility of a trapped atom interferometer with accelerating optical traps

Abstract

In order to increase the measured phase of an atom interferometer and improve its sensitivity, researchers attempt to increase the enclosed space-time area using two methods: creating larger separations between the interferometer arms and having longer evolution times. However, increasing the evolution time reduces the bandwidth that can be sampled, whereas decreasing the evolution time worsens the sensitivity. In this paper, we attempt to address this by proposing a setup for high-bandwidth applications, with improved overall sensitivity. This is realized by accelerating and holding the atoms using optical dipole traps. We find that accelerations of up to $10^{3}$-$10^{5}$ m/s$^2$ can be achieved using acousto-optic deflectors (AODs) to move the traps. By comparing the sensitivity of our approach to acceleration as a baseline to traditional atom interferometry, we find a substantial improvement to the state of the art. In the limit of appropriate beam and optics stabilization, sensitivities approaching 10$^{-14}$ (m/s$^2$)/$\sqrt{\rm Hz}$ may be achievable at 1 Hz, while detection at 1 kHz with a sensitivity an order of magnitude better than traditional free-fall atom interferometers is possible with today's systems.

Explore related subjects

Keep this discovery

BibTeXRIS

Gayathrini Premawardhana, Jonathan Kunjummen, Sarthak Subhankar, Jacob M. Taylor. 2023-08-23. Feasibility of a trapped atom interferometer with accelerating optical traps. https://arxiv.org/abs/2308.12246

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph