Dynamic Structure-Soil-Structure-Interaction for Nuclear Power Plants

Abstract

The paper explores the linear and nonlinear dynamic interaction between the reactor and the auxiliary buildings of a Nuclear Power Plant, aiming to evaluate the effect of the auxiliary building on the seismic response of crucial components inside the reactor building. Based on realistic geometrical assumptions, high-fidelity 3D finite element (FE) models of increasing sophistication are created in the Real-ESSI Simulator. Starting with elastic soil conditions and assuming tied soil-foundation interfaces, it is shown that the rocking vibration mode of the soil-reactor building system is amplified by the presence of the auxiliary building through a detrimental out-of-phase rotational interaction mechanism. Adding nonlinear interfaces, which allow for soil foundation detachment during seismic shaking, introduces higher excitation frequencies (above 10 Hz) in the foundation of the reactor building, leading to amplification effects in the resonant vibration response of the biological shield wall inside the reactor building. A small amount of sliding at the soil-foundation interface of the auxiliary building slightly decreases its response, thus reducing its aforementioned negative effects on the reactor building. When soil nonlinearity is accounted for, the rocking vibration mode of the soil-reactor building system almost vanishes, thanks to the strongly nonlinear response of the underlying soil. This leads to a beneficial out-of-phase horizontal interaction mechanism between the two buildings, reducing the spectral accelerations at critical points inside the reactor building by up to 55% for frequencies close to the resonant one of the auxiliary building. This implies that the neighboring buildings could offer mutual seismic protection to each other, in a similar way to the recently emerged seismic resonant metamaterials, provided that they are properly tuned during the design phase.