SI methane hydrate confined in C8-grafted SBA-15: A highly efficient storage system enabling ultrafast methane loading and unloading

Emile Jules Beckwée; Maarten Houlleberghs; Radu-George Ciocarlan; C. Vinod Chandran; Sambhu Radhakrishnan; Lucas Hanssens; Pegie Cool; Johan Martens; Eric Breynaert; Gino V. Baron; Joeri F. M. Denayer

doi:10.1016/j.apenergy.2023.122120

arXiv · 2310.14011

SI methane hydrate confined in C8-grafted SBA-15: A highly efficient storage system enabling ultrafast methane loading and unloading

Emile Jules Beckwée·Maarten Houlleberghs·Radu-George Ciocarlan·C. Vinod Chandran·Sambhu Radhakrishnan·Lucas Hanssens·Pegie Cool·Johan Martens·Eric Breynaert·Gino V. Baron·Joeri F. M. Denayer

View original source ↗Read source document ↗Export metadata ↓

Abstract

Confinement of water and methane in mesopores of hydrophobized SBA-15 is demonstrated to promote methane hydrate formation. In comparison to as-synthesized SBA-15, hydrophobization by C8 grafting accelerates the kinetics of methane storage in and delivery from the hydrate. C8 grafting density was determined at 0.5 groups nm-2 based on TGA and quantitative NMR spectroscopy. Multinuclear 1H-1H DQSQ and 1H-1H RFDR NMR provided spectroscopic evidence for the occurrence of C8 chains inside the mesopores of SBA-15, by showcasing close spatial proximity between the grafted C8 chains and pore-intruded water species. X-ray diffraction demonstrates formation of Structure I hydrate on SBA-15 C8. At 7.0 MPa and 248 K, the water-to-hydrate conversion on hydrophobized SBA-15 C8 reaches 96 pct. as compared to only 71 pct. on a pristine SBA-15 sample with comparable pore size, pore volume and surface area. The clathrate loading amounted to 14.8 g g-1. 2D correlation NMR spectroscopy (1H-13C CP-HETCOR, 1H-1H RFDR) reveals hydrate formation occurs within pores of SBA-15 C8 as well as in interparticle volumes. Following the initial crystallization of SBA-15 C8-supported methane hydrate taking several hours, a pressure swing process at 248 K allows to desorb and re-adsorb methane from the structure within minutes and without thawing the frozen water structure. Fast loading and unloading of methane was achieved in 19 subsequent cycles without losses in kinetics. The ability to harvest the gas and regenerate the structure without the need to re-freeze the water represents a 50 pct. energy gain with respect to melting and subsequently recrystallizing the hydrate at 298 K and 248 K, respectively. After methane desorption, a small amount of residual methane hydrate in combination with an amorphous yet locally ordered ice phase is observed using 13C and 2H NMR spectroscopy.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeX RIS

Emile Jules Beckwée, Maarten Houlleberghs, Radu-George Ciocarlan, C. Vinod Chandran, Sambhu Radhakrishnan, Lucas Hanssens, Pegie Cool, Johan Martens, Eric Breynaert, Gino V. Baron, Joeri F. M. Denayer. 2023-10-21. SI methane hydrate confined in C8-grafted SBA-15: A highly efficient storage system enabling ultrafast methane loading and unloading. https://doi.org/10.1016/j.apenergy.2023.122120

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗

arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗

arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗