SearcharxivSearch

arXiv · 2312.04785

The critical conditions for the re-ignition and detonation formation from Mach reflections of curved decaying shocks

Abstract

The objective of this study is to determine the critical conditions for a detonation wave formation following a Mach reflection of two incident shocks. This problem is central to the propagation mechanism of cellular detonations, where such periodic reflections occur continuously. A new experimental technique is introduced that permits the isolation of this Mach reflection. The technique is inspired by that of White (1963) and uses a detonation passing through a bifurcated converging-diverging nozzle to reproducibly generate the desired shock reflection at its exit, where the two transmitted mis-aligned incident shocks interact. The collision process was monitored with high-speed Schlieren videos. The experiments were performed in mixtures of methane-oxygen and hydrogen-oxygen-argon. Three distinct regimes of transmission were identified: detonation formation, decaying Mach shock followed by a flame, and inert Mach shock with no re-ignition. The condition separating the re-ignition and no re-ignition was very well predicted by the critical decay rate ignition theory of Eckett et al. On the other hand, the transition between detonation formation and ignition was found to correlate much better with the critical curvature concept of quasi-steady curved detonations of Kasimov and Stewart. Both mixtures were found in excellent agreement with this criterion, established on the basis of experimental velocity-curvature data available in the literature for these mixtures. For the hydrogen detonations, this criterion was also in agreement with the critical curvature predicted by ZND theory. For the methane detonations, order of magnitude disagreement was observed with the ZND model prediction, further confirming the propensity of irregular cellular detonations to propagate under higher curvatures than predicted by laminar detonation theory.

Explore related subjects

Keep this discovery

BibTeXRIS

Farzane Zangene, Matei Radulescu. 2023-12-08. The critical conditions for the re-ignition and detonation formation from Mach reflections of curved decaying shocks. https://arxiv.org/abs/2312.04785

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn