arXiv · 2401.16871
Node Flux-Linkage Synchronizing Control of Power Systems with 100% Wind Power Generation Based on Capacitor Voltage Balancing Scheme
Abstract
This paper proposes a node flux-linkage synchronizing control method (NFSCM) for power systems with 100% wind power generation based on a capacitor voltage balancing scheme (CVBS). Different from the conventional grid-forming controllers, NFSCM is designed to regulate inverters as virtual flux-linkage sources. Auto-synchronization of flux-linkage vectors is achieved through the CVBS-based NFSCM. The mismatch among the angular frequencies of flux-linkage vectors is eliminated by regulating the tracking errors of DC-link voltages, which establishes a negative feedback between the output frequency and active power of the inverter. NFSCM is adaptive to weak and strong grids. It avoids the excitation inrush currents in the step-up transformer of wind power generators. It also eliminates the DC components of the three-phase currents, and avoids low-frequency oscillations in active power. In order to limit the short-circuit current of inverters, a logic-based bang-bang funnel control (LBFC) is designed to control the switches of inverter bridges when over-current is detected. LBFC is able to restrict various fault currents within an acceptable range within the shortest time. LBFC and NFSCM are designed to operate in a switched manner according to a state-dependent switching strategy. Time-domain simulations were conducted on a 100% wind power generation test system, and the performance of NFSCM and LBFC were investigated.
Explore related subjects
Keep this discovery
Yang Liu, Yanshan Chen, Yuexi Yang, Xiangyu Pei, Feng Ji. 2024-01-30. Node Flux-Linkage Synchronizing Control of Power Systems with 100% Wind Power Generation Based on Capacitor Voltage Balancing Scheme. https://arxiv.org/abs/2401.16871
Cite the original work for its findings. Save a collection to share your selection of sources.