Linear stability analysis of compressible boundary layer over an insulated wall: Existence of multiple new unstable modes for Mach number beyond 3

Neha Chaturvedi; Swagata Bhaumik; Rituparn Somvanshi

Home/Archive/arXiv

arXiv · 2401.16939

Linear stability analysis of compressible boundary layer over an insulated wall: Existence of multiple new unstable modes for Mach number beyond 3

Neha Chaturvedi·Swagata Bhaumik·Rituparn Somvanshi

View original source ↗Read source document ↗Export metadata ↓

Abstract

Here, we investigate the linear spatial stability of a parallel two-dimensional compressible boundary layer on an adiabatic plate by considering 2D and 3D disturbances. We employ the Compound Matrix Method for the first time for compressible flows, which, unlike other conventional techniques, can efficiently eliminate the stiffness of the original equation. Our study explores flow Mach numbers ranging from low subsonic to supersonic cases, to investigate the effects of flow compressibility and spanwise variation of disturbances. We get some interesting results depending on the flow Mach number. Mack (AGARD Report No. 709, 1984) reported the existence of two unstable modes for Mach number greater than 3 from viscous calculations (the so-called second mode) that subsequently fuse to create only one unstable zone when Mach number increases. Our calculations show a series of unstable modes for a Mach number greater than 3. The number of such modes is much more than two (unlike what Mack reports). The number and the frequency extent of the corresponding unstable zones increase with an increase in M, which is significantly higher than subsonic or low-supersonic cases. While the shape of the neutral curves for the second unstable mode for a Mach number greater than 4 is similar to the fused neutral curve shown by Mack for a Mach number of 4.8, the characteristics of higher-order spatially unstable modes considering the viscous stability of supersonic boundary layers remain unreported to the best of our knowledge. The last one is the most novel element in the reported results.

Explore related subjects

physics.flu-dyn math-ph math.MP

Keep this discovery

BibTeX RIS

Neha Chaturvedi, Swagata Bhaumik, Rituparn Somvanshi. 2024-01-30. Linear stability analysis of compressible boundary layer over an insulated wall: Existence of multiple new unstable modes for Mach number beyond 3. https://arxiv.org/abs/2401.16939

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗