Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2402.04556

Large Eddy Simulation of the evolution of the soot size distribution in turbulent nonpremixed flames using the Bivariate Multi-Moment Sectional Method

Hernando Maldonado Colmán·Michael E. Mueller
View original source ↗Read source document ↗Export metadata ↓

Abstract

A joint volume-surface formalism of the Multi-Moment Sectional Method (MMSM) is developed to describe the evolution of soot size distribution in turbulent reacting flows. The bivariate MMSM (or BMMSM) considers three statistical moments per section, including the total soot number density, total soot volume, and total soot surface area per section. A linear profile along the volume coordinate is considered to reconstruct the size distribution within each section, which weights a delta function along the surface coordinate. The closure for the surface considers that the primary particle diameter is constant so the surface/volume ratio constant within each section. The inclusion of the new variable in BMMSM allows for the description of soot's fractal aggregate morphology compared to the strictly spherical assumption of its univariate predecessor. BMMSM is shown to reproduce bimodal soot size distributions in simulations of one-dimensional laminar sooting flames as in experimental measurements. To demonstrate its performance in turbulent reacting flows, BMMSM is coupled to a Large Eddy Simulation framework to simulate a laboratory-scale turbulent nonpremixed jet flame. Computational results are validated against available experimental measurements of soot size distribution, showing the ability of BMMSM to reproduce the evolution of the size distribution from unimodal to bimodal moving downstream in the flame. In general, varying the number of sections has limited influence on results, and accurate results are obtained with as few as eight sections so 24 total degrees of freedom. The impact of using a different statistical model for soot (HMOM) is also investigated. The total computational cost of using BMMSM as low as approximately 44% more than the cost of HMOM. The new formulation results in a computationally efficient approach for the soot size distribution in turbulent reacting flows.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Hernando Maldonado Colmán, Michael E. Mueller. 2024-02-07. Large Eddy Simulation of the evolution of the soot size distribution in turbulent nonpremixed flames using the Bivariate Multi-Moment Sectional Method. https://arxiv.org/abs/2402.04556

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗