Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2403.00610

Electrochemical Evaluation of Mg and a Mg-Al 5%Zn Metal Rich Primers for Protection of Al-Zn-Mg-Cu Alloy in NaCl

A. Korjenic·L. Blohm·J. R. Scully
View original source ↗Read source document ↗Export metadata ↓

Abstract

High purity magnesium and a Mg-Al 5wt% Zn metal rich primer (MRP) were compared for their ability to suppress intergranular corrosion (IGC) and intergranular stress corrosion cracking (IG-SCC) in peak aged AA 7075-T651 by sacrificial anode-based cathodic prevention. Tests were conducted in 0.6 M NaCl solution under full immersion. These evaluations considered the ability of the primer to attain an intermediate negative open circuit potential (OCP) such that the galvanic couple potential with bare aluminum alloy (AA) 7075-T651 resided below a range of potentials where IGC is prevalent. The ability of the primer to achieve an OCP negative enough that the AA 7075-T651 could be protected by sacrificial anode-based cathodic prevention and the ability to sustain this function over time were evaluated as a first step by utilizing a NaCl solution. The primers consisted of epoxy resins embedded with either (1) Mg flake pigments (MgRP) or (2) Mg flake pigments and spherical Al-5 wt.% Zn together as a composite (MgAlRP). MgRP was an effective coating for cathodic protection but dispensed less anodic charge than the composite MgAlRP. Cross-sectional analysis demonstrated that some Mg flakes dissolved while uniform surface oxidation occurred on the remaining Mg flakes which led to impaired activation. The composite MgAlRP maintained a suitably negative OCP over time, remained activated, dispensed high anodic charge, and remained an anode in zero resistance ammeter testing. Chemical stability modeling and zero resistance ammeter testing suggest that Mg corrosion elevates the pH which dissolved aluminum oxides and hydroxide thereby activates the Al-5wt.% Zn pigments, thereby providing a primary (i.e. Mg corrosion) and secondary process to enable superior (activation of Al-5wt%Zn) sacrificial anode-based cathodic protection.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

A. Korjenic, L. Blohm, J. R. Scully. 2024-03-01. Electrochemical Evaluation of Mg and a Mg-Al 5%Zn Metal Rich Primers for Protection of Al-Zn-Mg-Cu Alloy in NaCl. https://arxiv.org/abs/2403.00610

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗