Multi-droplet combustion in the presence of homogeneous and heterogeneous atomizations

Sepehr Mosadegh; Sina Kheirkhah

Home/Archive/arXiv

arXiv · 2403.09823

Multi-droplet combustion in the presence of homogeneous and heterogeneous atomizations

Sepehr Mosadegh·Sina Kheirkhah

View original source ↗Read source document ↗Export metadata ↓

Abstract

The effects of heterogeneous and homogeneous atomizations on combustion dynamics and flame spread rates of multi-droplets are experimentally investigated. The utilized fuel is biodiesel, which is doped with graphene oxide and blended with ethanol. Stable fuel suspensions are prepared. Either one droplet is positioned at the intersection of two thin fibers or an array of three droplets are positioned along a horizontal line and at the intersections of fibers. Simultaneous and time-resolved flame chemiluminescence and shadowgraphy techniques are utilized for imaging the flame and droplets, respectively. It is observed that, for a single droplet combustion of biodiesel, relatively low frequency (about 10 Hz) dynamics appear in the second half of the droplet life-time, which is due to heterogeneous atomizations. Blending with ethanol leads to homogeneous atomizations with dynamics featuring frequencies smaller than 50 Hz and at the beginning of the droplet lifetime. It is reported that the homogeneous atomizations lead to at least three times larger root-mean-square oscillations of the flame chemiluminescence compared to that for heterogeneous atomizations. For all tested multi-droplet configurations, independent of the graphene oxide doping concentration and blending with ethanol, the most dominant frequency of flame chemiluminescence oscillations is about 10-15 Hz. It is observed that the heterogeneous atomizations lead to a flame spread rate of about 6-8 mm2/s, with largest values reported for doping with moderate concentration of graphene oxide. Compared to that for heterogeneous atomizations, the flame spread rate for homogeneous atomizations are significantly larger 10-40 mm2/s, are not sensitive to graphene oxide doping concentration, and feature a positive relation with the root-mean-square of the flame chemiluminescence oscillations.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Sepehr Mosadegh, Sina Kheirkhah. 2024-03-14. Multi-droplet combustion in the presence of homogeneous and heterogeneous atomizations. https://arxiv.org/abs/2403.09823

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗