Luminescence properties and phase transformation of broadband NIR emitting A2(WO4)3:Cr3+ (A=Al3+, Sc3+) phosphors toward NIR spectroscopy applications

Shuai Yang; Yongjie Wang; Guotao Xiang; Sha Jiang; Li Li; Faling Ling; Huanhuan Hu; Yuanyuan Zhang; Xianju Zhou; Andrzej Suchocki

doi:10.1016/j.jlumin.2022.119445

arXiv · 2403.15148

Luminescence properties and phase transformation of broadband NIR emitting A2(WO4)3:Cr3+ (A=Al3+, Sc3+) phosphors toward NIR spectroscopy applications

Shuai Yang·Yongjie Wang·Guotao Xiang·Sha Jiang·Li Li·Faling Ling·Huanhuan Hu·Yuanyuan Zhang·Xianju Zhou·Andrzej Suchocki

View original source ↗Read source document ↗Export metadata ↓

Abstract

The synthesis, structural, and luminescence properties have been carried out for Cr3+-activated Al2(WO4)3 (AWO) and Sc2(WO4)3 (SWO) phosphors for application in pc-NIR LED. Upon blue excitation, these compounds are capable of exhibiting broadband NIR emission stems primarily from 4T2-->4A2 transition in the range of 670-1200 nm (maxima ~808 nm, FWHM ~140 nm) for AWO:Cr and of 700-1300 nm (maxima ~870 nm, FWHM ~164 nm) for SWO:Cr. The significant shift of NIR emission is attributed to the substitution of AlO6 with larger ScO6 octahedrons. To gain insight into the luminescence the crystal field strength, Racah parameters, nephelauxetic effect, and electron-phonon coupling have been analyzed based on spectroscopic results. The electron-phonon coupling parameter S for SWO:Cr was determined to be 11.5, twice as large as that for AWO:Cr, which is in accordance with its strong thermal quenching. The abrupt changes occurring at 275 K in temperature-dependent luminescence spectra and decay lifetime of AWO:Cr is associated with temperature-driven phase transformation from low-temperature monoclinic to high-temperature orthorhombic phase. Pressure induced amorphization of AWO:Cr at pressures higher than 25 kbar was confirmed by employing high pressure evolution of Raman spectra. A high-power NIR pc-LED, fabricated by coating AWO:0.04Cr on a commercial 470 nm LED chip, shows good performance with an output power of 17.1 mW driven by a current of 320 mA, revealing potential application of studied materials for NIR light source.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeX RIS

Shuai Yang, Yongjie Wang, Guotao Xiang, Sha Jiang, Li Li, Faling Ling, Huanhuan Hu, Yuanyuan Zhang, Xianju Zhou, Andrzej Suchocki. 2024-03-22. Luminescence properties and phase transformation of broadband NIR emitting A2(WO4)3:Cr3+ (A=Al3+, Sc3+) phosphors toward NIR spectroscopy applications. https://doi.org/10.1016/j.jlumin.2022.119445

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗

arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗

arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗