CFD analysis on the performance of a coaxial rotor with lift offset at high advance ratios

Kaito Hayami; Hideaki Sugawara; Takumi Yumino; Yasutada Tanabe; Masaharu Kameda

doi:10.1016/j.ast.2023.108194

Home/Archive/arXiv

arXiv · 2406.18826

CFD analysis on the performance of a coaxial rotor with lift offset at high advance ratios

Kaito Hayami·Hideaki Sugawara·Takumi Yumino·Yasutada Tanabe·Masaharu Kameda

View original source ↗Read source document ↗Export metadata ↓

Abstract

The aerodynamic performance of an isolated coaxial rotor in forward flight is analyzed by a high-fidelity computational fluid dynamics (CFD) approach. The analysis focuses on the high-speed forward flight with an advance ratio of 0.5 or higher. The effect of the degree of the rolling moment on the rotor thrust, called lift offset, is studied in detail. The coaxial rotor model is a pair of contrarotating rotors, each rotor consisting of two untwisted blades with a radius of 1.016 m. The pitch angle of the blades is controlled by both collective and cyclic as in a conventional single main-rotor helicopter. CFD analysis is performed using a flow solver based on the compressible Navier-Stokes equations with a Reynolds-averaged turbulence model. Laminar/turbulent transition in the boundary layer is taken into account in the calculation. The rotor trim for target forces and moments is achieved using a gradient-based delta-form blade pitch angle adjusting technique in conjunction with CFD analysis. The reliability of the calculations is confirmed by comparison with published wind tunnel experiments and two comprehensive analyses. Applying the lift offset improves the lift-to-effective drag ratio (lift-drag ratio) and reduces thrust fluctuations. However, in the case where the advance ratio exceeds 0.6, the lift-drag ratio drops significantly even if the lift offset is 0.3. The thrust fluctuation also increases with such a high advance ratio. Detailed analysis reveals that the degradation of aerodynamic performance and vibratory aerodynamic loads is closely related to the pitch angle control to compensate for the reduction in thrust on the retreating side due to the increased reverse flow region. It is effective to reduce the collective and longitudinal cyclic pitch angles for the improvement of the aerodynamic performance of coaxial rotors with an appropriate lift offset.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Kaito Hayami, Hideaki Sugawara, Takumi Yumino, Yasutada Tanabe, Masaharu Kameda. 2024-06-27. CFD analysis on the performance of a coaxial rotor with lift offset at high advance ratios. https://doi.org/10.1016/j.ast.2023.108194

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗