Towards large eddy simulations of premixed turbulent flames without a combustion model

Andrei N. Lipatnikov

Home/Archive/arXiv

arXiv · 2408.07668

Towards large eddy simulations of premixed turbulent flames without a combustion model

Andrei N. Lipatnikov

View original source ↗Read source document ↗Export metadata ↓

Abstract

The paper aims at assessing a hypothesis that resolution required to evaluate fuel consumption and heat release rates by directly (i.e., without a subgrid model of unresolved influence of small-scale turbulent eddies on the local flame) processing filtered fields of density, temperature, and species mass fractions should be significantly finer than resolution required to directly compute flame surface density by processing the same filtered fields. For this purpose, box filters of various widths are applied to three-dimensional Direct Numerical Simulation data obtained earlier by Dave et al. (Combust. Flame 196 (2018) 386-399) from a statistically one-dimensional and planar, moderately lean H2/air complex-chemistry flame propagating in a box under conditions of sufficiently intense small-scale turbulence (Karlovitz number is larger than unity and a ratio of laminar flame thickness to Kolmogorov length scale is about 20). Results confirm this hypothesis and show that the mean flame surface density and area can be predicted with acceptable accuracy by processing filtered combustion progress variable fields computed using a sufficiently wide filter. Such an approach does not require a model of the influence of subgrid turbulent eddies on flame surface density provided that filter width and laminar flame thickness are of the same order of magnitude. Good performance of this approach is attributed to inability of small-scale (when compared to the thickness) turbulent eddies to substantially change the local flame structure, which, nevertheless, is significantly perturbed by larger turbulent eddies that strain the local flame.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Andrei N. Lipatnikov. 2024-08-14. Towards large eddy simulations of premixed turbulent flames without a combustion model. https://arxiv.org/abs/2408.07668

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗