Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2409.03293

Over 50 mA current in interdigitated diamond field effect transistor

Damien Michez·Juliette Letellier·Imane Hammas·Julien Pernot·Nicolas C. Rouger
View original source ↗Read source document ↗Export metadata ↓

Abstract

This letter presents the bulk diamond field-effect transistor (FET) with the highest current value reported at this moment. The goal was to drastically increase the current of this type of device by increasing the total gate width thanks to an interdigitated architecture and homogeneous growth properties. We report the results obtained by fabricating and characterizing an interdigitated junction FET (JFET). The device develops a total gate width of 14.7 mm, with 24 paralleled fingers and a current higher than 50 mA at VDS = -15 V, VGS = 0 V, at 450 K and under illumination which is the highest value reported for a bulk diamond FET. Its specific ON-resistance and threshold voltage are respectively 608 m$\Omega$.cm${}^2$, 50 V. From Transfer length method (TLM) measurements we extract a resistivity of 3.6 m$\Omega$.cm for a heavily boron-doped (p++)-diamond layer and 1.52 $\Omega$.cm for a 2.1017 cm-3 p-doped diamond layer at 450 K. We measured the drain current versus gate voltage characteristics at high temperature showing that it is no longer the conduction channel resistance but the device access resistance that is predominant. This study indicates that it is possible to drastically improve the ON-state of FETs by using an interdigitated architecture, while using homogeneous large size diamond layers grown by CVD.

Explore related subjects

physics.app-phcond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Damien Michez, Juliette Letellier, Imane Hammas, Julien Pernot, Nicolas C. Rouger. 2024-09-05. Over 50 mA current in interdigitated diamond field effect transistor. https://doi.org/10.1109/led.2024.3453504

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Janus Dipoles: Fundamentals, Realizations, and Emerging Applications

The Janus dipole - featuring orthogonally oriented electric and magnetic dipoles with a 90-degree phase difference - has emerged as a powerful paradigm for wave manipulation. Unlike traditional Huygens dipoles used for directional control, this unique configuration exhibits strongly asymmetric, face-selective near-field behavior while maintaining a quasi-isotropic far-field radiation pattern. These remarkable properties make the Janus dipole an essential platform for directional wave shaping, with wide-ranging applications in on-chip photonics, quantum interactions, and wireless power transfer. This review systematically traces the rapid development of the Janus dipole from its foundational theoretical inception to its diverse implementation platforms across optical, microwave, and acoustic frequencies. In this paper, we explore the governing principles, classify realization strategies into passive Janus dipoles, active Janus dipoles, and advanced near-field coupling control, and highlight emerging frontiers. By bridging foundational electrodynamics with advanced device engineering, this paper serves as an essential reference and roadmap for researchers designing next-generation, highly integrated, and compact wave-manipulation systems.

physics.app-ph↗
arXiv2026

Scattering-robust Imaging of Azimuthal Features with Enhanced Resolution

Imaging through scattering media remains a long-standing challenge in numerous real-world applications, ranging from medical imaging to long-distance sensing. Recently, illumination consisting of a single orbital angular momentum (OAM) mode, which is structured in the azimuthal coordinate, has been shown to provide enhanced resolution for imaging objects with azimuthal features, with the resolution becoming maximum at an optimal OAM value. However, in the presence of scattering, single-mode fields, which are spatially fully coherent, cause the imaging resolution to decrease significantly due to speckle formation. In this work, we employ azimuthally partially coherent fields and experimentally demonstrate imaging of azimuthal features with enhanced resolution in the presence of scattering. We show that lower degree of azimuthal coherence in such illumination leads to increased robustness against scattering while the azimuthal structure of the illumination ensures enhanced resolution. We derive the condition for best imaging resolution, and we report increase of imaging contrast in scattering from about 7% to 50% as the illumination is changed from a single-mode fully coherent field to that of an azimuthal partially coherent field.

physics.app-ph↗
arXiv2026

Influence of magnetic fields on the performance of spin-orbit torque magnetic random-access memory

Spin-orbit torque magnetic random-access memory (SOT-MRAM) offers high speed, ultrahigh endurance, and compatibility with advanced semiconductor processes, making it a promising candidate for next-generation nonvolatile memory. However, intrinsic bias fields in magnetic tunnel junctions (MTJs), originating from reference-layer stray fields and interlayer coupling, cause asymmetric critical switching currents and increased energy consumption. Existing compensation approaches usually introduce additional magnetic layers into the MTJ stack, which increases fabrication complexity and limits wafer-scale integration. Here, we propose a bias-compensation strategy without modifying the MTJ stack by engineering local stray magnetic fields through magnetic filling materials in vertical interconnect access (VIA) channels during the back-end-of-line process. Micromagnetic simulations show that the proposed magnetic filling layer can provide the required auxiliary field for deterministic switching and significantly suppress write-current asymmetry. By optimizing the MTJ position relative to the magnetic filling structure, the write-current bias ratio is reduced from 21.6% in the conventional design to 1.3%. The approach is also applicable to in-plane magnetic anisotropy SOT-MTJs, reducing the bias ratio from 19.8% to -0.2%. Scaling analysis further demonstrates that the compensation effect remains effective when the device size is reduced to 20% of the original dimension (MTJ diameter approximately 10 nm), indicating its potential for high-density SOT-MRAM integration.

physics.app-ph↗