SearcharxivSearch

arXiv · 2411.06415

Effects of confinement, impinging shock deflection angle, and Mach number on the flow field of a supersonic open cavity

Abstract

Cavities exhibit inherent self-sustaining oscillations driven by the coupling between their hydrodynamic and acoustic properties. In practical applications, cavities are often placed within confinements that introduce compression waves, significantly influencing their primary flow characteristics. The oscillations in cavities have widespread applications, such as in fuel-air mixing, heat exchangers, and landing gears However, when resonance occurs, these oscillations can lead to structural failures. Therefore, understanding cavity oscillations under diverse geometrical configurations and flow conditions is essential. The present study examines the impact of top wall confinement on an open cavity with a length-to-depth ratio (L/D) ratio of 3 at Mach 1.71, along with the effects of varying deflection angles on flow characteristics and the influence of an increased Mach number on configurations with the highest and lowest oscillation frequencies. A three-dimensional numerical investigation is carried out, employing large eddy simulations within the OpenFOAM framework. We analyze the flow fields through the spatial variation of density over time. Fast Fourier Transformation and Wavelet Transformation reveal the frequency content from unsteady pressure signals and illustrate its evolution over time under different conditions. Additionally, reduced-order modeling provides a better understanding of the relationship between frequencies and flow structures of the cavity. Results from these analyses demonstrate that top wall confinement increases oscillation frequency, while greater deflection angles introduce Kelvin-Helmholtz instability in the flow field, reducing the frequency. An increase in the Mach number to 2, further intensifies instability, substantially affecting oscillations.

Explore related subjects

Keep this discovery

BibTeXRIS

Sreejita Bhaduri, Mohammed Ibrahim Sugarno, Ashoke De. 2024-11-10. Effects of confinement, impinging shock deflection angle, and Mach number on the flow field of a supersonic open cavity. https://doi.org/10.1063/5.0234999

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn