Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2501.09263

UV filaments

Ali Rastegari·Alejandro Aceves·Jean-Claude Diels
View original source ↗Read source document ↗Export metadata ↓

Abstract

This chapter starts with a discussion of the main qualitative differences between UV and mid-IR filaments: from multiphoton ionization in the UV to tunnel ionization in the near- to mid-IR. A general qualitative analysis of the properties of single filaments versus wavelength follows. Because of their long pulse duration, a quasi-steady-state theory of their propagation is possible. An eigenvalue approach leads to a steady-state field envelope that is compared to the Townes soliton. However, that solution is close enough to a Gaussian shape to justify a parametric evolution approach. After this theoretical introduction, an experimental verification at 266 nm follows. Femtosecond UV filaments were generated with frequency-tripled Ti:sapphire sources and KrF amplifiers. The source for long-pulse filaments is an oscillator-amplifier Nd-YAG Q-switched system, frequency doubled, compressed, and frequency doubled again to reach 170 ps pulses of 300 mJ energy. The sub-nanosecond duration of the UV pulse may revive the debate as whether the filament is a moving focus or self-induced waveguide. Two applications of UV filaments are presented in the last two sections. It is shown that isotopically selective laser-induced breakdown spectroscopy (LIBS) is possible by exploiting the narrow dips observed in the emission spectrum. These dips are due to reabsorption by the material in the plume created by the impact of the filament on a solid. These absorption lines are only a few-pm wide and are exactly centered at the wavelength of a transition from ground state of the material, without any Stark shift or broadening. A final application is laser-induced discharge, which is a guided discharge that follows exactly the path of the inducing UV filament. Laser-induced discharge may lead to the control of lightning, which is a topic of intense research in Europe.

Explore related subjects

physics.optics

Keep this discovery

BibTeXRIS

Ali Rastegari, Alejandro Aceves, Jean-Claude Diels. 2025-01-16. UV filaments. https://doi.org/10.1049/sbew527e_ch2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗
arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗
arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗