Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2502.11130

Advanced 3D-Printed Multiphasic Scaffold with Optimal PRP Dosage for Chondrogenesis of BM-MSCs in Osteochondral Tissue Engineering

Faezeh Ghobadi·Maryam Mohammadi·Rooja Kalantarzadeh·Ehsan Lotfi·Shokoufeh Borhan·Narendra Pal Singh Chauhan·Ghazaleh Salehi·Sara Simorgh
View original source ↗Read source document ↗Export metadata ↓

Abstract

In osteochondral tissue engineering (OCTE), simultaneously regenerating subchondral bone and cartilage tissue presents a significant challenge. Multiphasic scaffolds were created and manufactured using 3D printing to address this issue. Excellent interfacial mechanical properties and biocompatibility enhance the growth and chondrogenic differentiation of bone marrow mesenchymal stem cells (BM-MSCs). The subchondral bone bottom layer is mimicked by incorporating varying concentrations of graphene oxide (GO) (0%, 1%, and 2% w/v) into a bioink composed of alginate (Alg) and gelatin (Gel). Based on evaluations of mechanical and biocompatibility properties, 1% GO is selected for further studies. Subsequently, the GO concentration is kept constant while varying the platelet-rich plasma (PRP) dosage in the multiphasic scaffolds. Different PRP dosages (0%, 1%, 2%, and 3% w/v) are integrated into the Alg-Gel bioink to simulate cartilage tissues. Results indicate that 3D-printed scaffolds containing 1% or 2% PRP exhibit favorable biomechanical properties, with no significant differences observed. However, BM-MSCs exposed to 2% PRP demonstrate enhanced adhesion, growth, and viability. Additionally, real-time PCR and Alcian blue staining confirm increased chondrogenic expression and glycosaminoglycans (GAGs) synthesis. This work highlights the promising potential of 3D-printed multiphasic frameworks in the development of OCTE.

Explore related subjects

q-bio.TO

Keep this discovery

BibTeXRIS

Faezeh Ghobadi, Maryam Mohammadi, Rooja Kalantarzadeh, Ehsan Lotfi, Shokoufeh Borhan, Narendra Pal Singh Chauhan, Ghazaleh Salehi, Sara Simorgh. 2025-02-16. Advanced 3D-Printed Multiphasic Scaffold with Optimal PRP Dosage for Chondrogenesis of BM-MSCs in Osteochondral Tissue Engineering. https://arxiv.org/abs/2502.11130

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Adaptive therapy under parametric, structural, and measurement uncertainty

Adaptive therapy has emerged as a promising treatment strategy that exploits within-tumour competition to delay disease progression. Implementation, however, typically relies on indirect measurements of tumour burden and must account for potentially substantial patient heterogeneity. In this work, we capture patient-to-patient variability, parameter uncertainty, and imperfect biomarker measurements with a mathematical and statistical model that we calibrate to clinical prostate cancer data using a Bayesian inference framework. We use the resulting virtual cohort to demonstrate that, within the simple but now well-established Lotka-Volterra-based model, adaptive therapy robustly improves time-to-progression for the subset of patients that are predicted to eventually progress by the model. To account for other risk factors associated with larger tumour volumes, we introduce a new metric based on the risk of metastasis that demonstrates how adaptive therapy may be disadvantageous when sustained tumour burden is also considered. Given the ubiquity of uncertainty in oncology, we then describe several future modelling directions that also capture uncertainty in the temporal evolution of the underlying tumour or biomarker dynamics. Finally, we demonstrate how model misspecification and non-identifiability can lead to unreliable predictions, especially if uncertainty is inadequately captured.

q-bio.TO↗
arXiv2026

Head Impact Characterization and Cellular Response of a Live-neuron cell-integrated Biomechanical Full-body Surrogate Model

In this study, we develop a novel integrated framework that links the impact response with cellular dynamics using a live-neuron cell-integrated biomechanical full-body surrogate model. The impact event is simulated by allowing the surrogate model to fall from controlled seated release angles of 30-degree, 60-degree, and 90-degree. Three vertically stacked cell-culture Petri dishes, each containing live SH-SY5Y neuroblastoma cells, were placed inside the head of a commercially available surrogate model. The dynamic response of the impact event was evaluated using acceleration measurements from six accelerometers, comprising three sensors mounted on the head surface and three embedded in series with the cell stacks, along with kinematic measurements of the fall and deformation of the head model. In parallel, an OpenSim-based modified musculoskeletal model was used to simulate the fall experiment. We found that variation in contact stiffness produced the largest change in the predicted head acceleration in the simulation. When the cellular response and the measured accelerations are compared, oxidative stress and cell viability showed trends consistent with the regional acceleration and angle of fall. At the 90-degree fall, where median peak linear accelerations ranged from 170-258g, and the maximum headform deformation was approximately 9.4 mm, oxidative stress increased to approximately twice that of the control sample. We also quantified the cellular drift of SH-SY5Y cells, which is focal in nature for the 90-degree impact condition. The corresponding fall scenarios were also simulated in OpenSim and a preliminary calibration relationship was developed to compare the kinematic responses of the physical surrogate and musculoskeletal model. Finally, the framework provides a basis for relating experimental surrogate measurements to human head-neck response during impact.

q-bio.TO↗
arXiv2026

History Matters: Damage-Mediated Amplification of Brain Deformation and Injury Risk under Repeated Head Impacts

Computational head models are typically applied to isolated impacts, leaving repeated head loading largely unexplored. An Ogden-Roxburgh Mullins damage formulation was implemented in a high-fidelity finite element head model to represent loading-history-dependent softening during cyclic brain-tissue deformation. Repeated-loading histories derived from mixed martial arts head-impact data were applied and compared with damage-free hyperelastic (HE) and linear visco-hyperelastic (LVHE) model variants. Under five identical single-axis cycles, Mullins-type softening progressively increased strain and strain rate metrics relative to the HE model. Mullins-based injury probabilities progressively exceeded strain-based HE predictions and diverged from unchanged kinematics-based predictions, indicating that neglecting prior softening may underestimate injury risk. In a randomized twenty-cycle multiaxial sequence, cycles of similar kinematic intensity produced different deformation and injury-risk estimates depending on prior softening. HE and LVHE models predicted higher injury probabilities initially, whereas the Mullins-based model produced the largest later-cycle estimates and highest probability of at least one injury over the sequence. Regional amplification depended on loading direction and prior softening, with no direction-independent trend among brain substructures. Gyral elements exhibited higher cumulative maximum principal strain than sulcal elements, which showed greater amplification relative to initial responses. These findings demonstrate that short-term damage-mediated softening can substantially amplify tissue deformation and injury-risk estimates beyond damage-free head models under the same loading histories. Further experimental characterization of cyclic brain-tissue softening is needed to improve models of repeated head loading and traumatic brain injury.

q-bio.TO↗