SearcharxivSearch

arXiv · 2505.04635

Enhanced Biogas Production via Anaerobic Co-Digestion of Slaughterhouse and Food Waste Using Ferric Oxide as a Sustainable Conductive Material

Abstract

The anaerobic co-digestion of slaughterhouse wastewater and food waste offers a sustainable approach to waste treatment and biogas production. However, limited literature was found on the study of ferric oxide as conductive material in co-digestion of the two substrates. This study evaluates the effect of ferric oxide on biogas yield, organic matter removal, and kinetics of anaerobic co-digestion. Five batch tests were performed: four with varying ferric oxide doses and one control. Results showed that ferric oxide significantly enhanced total solids (TS) and volatile solids (VS) reduction. The reactor with 0.5 g ferric oxide per 800 mL working volume achieved the highest TS and VS reduction, corresponding to the maximum methane yield of 9878.95 L methane per kg volatile solid. At this optimal dosage, biogas production increased by 81 percent compared to the control. However, further increases in ferric oxide above the optimal dosage concentration decreases biogas yield, indicating a threshold beyond which inhibitory effects occur. In addition, at this optimal dosage, reduction in BOD and COD was observed due to enhanced microbial activity. Furthermore, ferric oxide stabilizes anaerobic digestion by mitigating inhibitory compounds and promoting direct interspecies electron transfer, leading to improved methane yield. Kinetic modeling using the Logistic Function accurately predicted methane production trends, demonstrating its potential for industrial-scale application. Overall, the study confirms that ferric oxide at an optimal dose significantly enhance biogas yield and system performance during the anaerobic co-digestion.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Michelle C. Almendrala, Kyle Adrienne T. Valenzuela, Steffany Marie Nina B. Santos, Louise Grace S. Avena-Ardeta. 2025-04-30. Enhanced Biogas Production via Anaerobic Co-Digestion of Slaughterhouse and Food Waste Using Ferric Oxide as a Sustainable Conductive Material. https://arxiv.org/abs/2505.04635

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Breaking Water at Graphene Defects

Water dissociation at solid surfaces underpins processes ranging from corrosion and catalysis to electrochemistry and photovoltaics. Defects often serve as reactive sites for dissociation, yet how solvation influences water dissociation at such sites remains poorly understood. Here, we use state-of-the-art machine-learned interatomic potentials to explore water dissociation at defective graphene-water interfaces. We show that solvation qualitatively changes the reaction mechanism at a graphene single vacancy (SV), opening pathways that are absent for an isolated water molecule. Whereas the gas-phase process proceeds via a single concerted channel, the solvated SV splits water through two competing pathways: a basic route forming SV-H and OH-(aq), and an acidic route forming SV-OH and H3O+(aq). These lower-barrier pathways produce distinct chemisorbed intermediates that enhance graphene-water adsorption. Accordingly, even a simple carbon vacancy gives rise to unexpectedly rich interfacial chemistry, coupling surface chemistry to interfacial charge and wettability, with implications for carbon functionalization and nanofluidic transport.

physics.chem-ph

Comprehensive Study of L-Menthol and Octanoic Acid as a Hydrophobic Eutectic Solvent

Hydrophobic eutectic solvents (HES) based on natural compounds represent promising green alternatives to conventional solvents. In this work, we investigate the physicochemical, structural, and dynamical properties of an ES formed by L-menthol and octanoic acid using a combined experimental and molecular dynamics simulation approach. Five compositions with molar ratios from 1:3 to 3:1 were studied with molecular dynamics simulation in the temperature range 15 degrees C to 35 degrees C. Experimental measurements of density and viscosity in the temperature range from 5 degrees C to 35 degrees C were complemented with results obtained from MD simulations employing the OPLS force field. Structural analyses based on radial distribution functions and Kirkwood-Buff integrals reveal that the dominant interactions in the mixture are hydrogen bonds between L-menthol and octanoic acid molecules. Dynamic properties, including self-diffusion coefficients and hydrogen-bond lifetimes, indicate that intermolecular hydrogen bonds between the two components are stronger and longer-lived than bonds between identical species. These findings provide molecular-level insight into the structure and transport properties of menthol-based ESs relevant for green solvent applications.

physics.chem-ph

More is not always better: Dissociative photoionization limits the EUV absorbing photacid generator pentafluorophenyl triflate in photolithography

Pentafluorophenyl triflate has been explored as a highly absorbing neutral photoacid generator (PAG) candidate for next generation chemically amplified resists used in extreme ultraviolet (EUV) lithography. Although increased fluorination enhances EUV absorption, this study demonstrates that such an approach does not necessarily improve photoacid generation efficiency. Using photoelectron-photoion coincidence (PEPICO) spectroscopy at the 92 eV photon energy of the EUV scanners in combination with quantum chemical calculations, the dissociative photoionization of pentafluorophenyl triflate was systematically investigated. The photoionization mass spectrum reveals extensive fragmentation, with the parent ion contributing only 3.1 % of the total signal and CF$_3^+$ representing the dominant product ion. Computed appearance energies align well with experimental trends and support a sequential fragmentation pathway involving loss of SO$_2$, CF$_3$, and CO. Crucially, none of the major dissociation channels yield precursors capable of forming triflic acid, the strong photoacid required for efficient deprotection reactions in chemically amplified resists. Combined with previous dissociative electron attachment studies indicating similarly unfavorable fragmentation, the results demonstrate that despite its high EUV absorption cross section, pentafluorophenyl triflate is unsuitable as a PAG for EUV lithography. The findings highlight the importance of understanding fundamental photoionization and electron interaction mechanisms to guide the rational design of next generation high performance EUV photoresists.

physics.chem-ph