Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2507.17723

Application of new conformal cooling layouts to the green injection molding of complex slender polymeric parts with high dimensional specifications

Abelardo Torres Alba·Jorge Manuel Mercado Colmenero·Juan de Dios Caballero Garcia·Cristina Martin Donate
View original source ↗Read source document ↗Export metadata ↓

Abstract

Eliminating warpage in injection molded polymeric parts is one of the most important problems in the injection molding industry today. This situation is critical in geometries that are particularly susceptible to warping due to their geometric features, and this occurs with topologies of great length and slenderness with high changes in thickness. These features are, in these special geometries, impossible to manufacture with traditional technologies to meet the dimensional and sustainable requirements of the industry. This paper presents an innovative green conformal cooling system that is specifically designed for parts with slender geometric shapes that are highly susceptible to warping. Additionally, the work presented by the authors investigates the importance of using highly conductive inserts made of steel alloys in combination with the use of additively manufactured conformal channels for reducing influential parameters, such as warpage, cooling time, and residual stresses in the complex manufacturing of long and slender parts. The results of this real industrial case study indicated that the use of conformal cooling layouts decreased the cycle time by 175.1 s 66% below the current cooling time; the temperature gradient by 78.5% specifically, 18.16 C; the residual stress by 39.78 MPa or 81.88%; and the warpage by 6.9 mm or 90.5%. In this way, it was possible to achieve a final warping in the complex geometry studied of 0.72 mm, which was under the maximum value required at the industrial level of 1 mm. The resulting values obtained by the researchers present a turning point from which the manufacturing and sustainability in the injection molding of said plastic geometries is possible, and they take into account that the geometric manufacturing features analyzed will present a great demand in the coming years in the auto parts manufacturing industry.

Explore related subjects

cs.CE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Abelardo Torres Alba, Jorge Manuel Mercado Colmenero, Juan de Dios Caballero Garcia, Cristina Martin Donate. 2025-07-23. Application of new conformal cooling layouts to the green injection molding of complex slender polymeric parts with high dimensional specifications. https://doi.org/10.3390/polym15030558

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

A Framework for Discharge Time Prediction of Energy Storage Units Based on Coupled Dynamics and Multi-Factor Aging Models

This paper presents a physically interpretable framework for predicting time to empty (TTE) in portable embedded systems. The framework couples usage-driven load-power decomposition, electrical power-voltage-current closure, a semi-empirical aging model, and SOC-temperature dynamics. Smartphone telemetry is mapped to battery current through an interpretable load model and conversion-efficiency correction. Battery capacity loss is modeled by combining Arrhenius temperature dependence, SEI diffusion behavior, and cycle-related power-law degradation. The coupled dynamic model then predicts TTE under different initial SOC values, ambient temperatures, and usage profiles. Chronological hold-out evaluation on a 6.9-h smartphone discharge session yielded a current RMSE of 0.0095 $\pm$ 0.0006 A, a temperature RMSE of 2.93 $\pm$ 0.24$^\circ$C, and a TTE MAPE of 4.81 $\pm$ 0.61%. Evaluation on NASA cell B0005 produced a capacity-loss RMSE of 0.031 Ah. Baseline, ablation, and counterfactual analyses further illustrate the contributions of thermal and aging corrections and the relative influence of load features. The results demonstrate the feasibility and interpretability of the proposed framework, while broader validation across devices and batteries remains necessary.

cs.CE↗
arXiv2026

Node-Shift-Encoding Genetic Algorithm with fuzzy-enhanced reference tour to solve the bi-objective service-oriented TSP

The Travelling Salesman Problem (TSP) remains a key area of research in combinatorial optimization, with applications in logistics, manufacturing, and service delivery. This paper addresses a bi-objective service-oriented TSP in which the clients' ranks in the delivery path matter. Unlike conventional depot-based TSP formulations, the considered problem does not assume a distinguished depot or a fixed tour origin. To address this setting, we adapt the Miller--Tucker--Zemlin (MTZ)-based formulation and derive an original linearization of the resulting model, enabling its solution with off-the-shelf integer linear programming solvers. This adaptation avoids the rigid tour origin imposed by the conventional MTZ formulation, for which fixing the starting node does not affect the tour cost but can affect the objective in a customer-rank-sensitive TSP. To solve this problem, we present a Node-Shift-Encoding (NSE)-based Genetic Algorithm augmented with fuzzy reasoning to update the reference tour throughout the evolutionary process. Experimental evaluation on TSPLIB benchmarks demonstrates that the proposed method achieves improved performance compared with the classical NSE approach.

cs.CE↗
arXiv2026

Geometric organization of olfactory descriptor data in the Poincar\'e disk

Odor quality is commonly represented using high dimensional descriptor profiles, yet their low dimensional organization remains unclear. We investigated whether a two-dimensional hyperbolic embedding can provide an interpretable representation of this structure. We applied hyperbolic metric multidimensional scaling to two complementary datasets: 480 Sagar rating profiles from three participants rating 160 odorants on 15 continuous descriptors, and 4983 GoodScents--Leffingwell molecules annotated with 138 binary descriptors. The embeddings substantially preserved pairwise descriptor distances, supporting subsequent analyses of radial and angular organization. In Sagar, rating profile entropy was strongly and negatively associated with hyperbolic radius, with diffuse profiles closer to the center and concentrated profiles closer to the boundary. This radial organization emerged primarily at the level of the full descriptor profile, rather than any individual descriptor, and remained robust across alternative descriptor representations, participant specific analyses, and averaged ratings. Sweet, musky, fruity, pleasantness showed the strongest directional trends. In GoodScents--Leffingwell, active label entropy, reflecting descriptor multiplicity, increased with radius, whereas orthogonalized descriptor entropy, reflecting spread across orthogonal modes, decreased with radius. Related binary descriptors occupied coherent localized high-density regions. These findings reveal complementary radial and angular organization in the hyperbolic representation of olfactory descriptor data. They support hyperbolic mapping as an interpretable descriptive framework in which radius summarizes global profile properties, while the angular component captures continuous descriptor gradients and categorical organization.

cs.CE↗