SearcharxivSearch

arXiv · 2512.06626

Half-explicit Runge-Kutta integrators for variational multiscale turbulence modeling: Toward higher-order accuracy in space and time

Abstract

The residual-based variational multiscale (VMS) formulation has achieved remarkable success in large-eddy simulation of turbulent flows. However, its temporal discretization has largely remained limited to second-order implicit schemes. The present work aims at advancing this direction through the introduction of Runge-Kutta (RK) schemes within the VMS framework in a mathematically consistent manner. Guided by the Rothe method, the half-explicit RK scheme is employed as its accuracy is theoretically guaranteed for index-2 differential-algebraic equations. Owing to the explicit treatment of the nonlinear term, the resulting spatial problem exhibits a structure analogous to that of the Darcy equation. Following the philosophy of the VMS analysis, a subgrid-scale model is derived without invoking linearization based on perturbation series and related assumptions. The analysis further reveals that the parameter in the subgrid model is independent of the spatial mesh size. Fourier analysis demonstrates that the Rothe method, compared with the conventional vertical method of lines, provides improved dissipation and dispersion properties and exhibits a larger stability region for convection-dominated regimes. In the Taylor-Green vortex benchmark, the proposed schemes demonstrate superior performance as a large-eddy simulation model, achieving higher fidelity in predicting the kinetic energy evolution, energy spectra, and vortex structures than the conventional VMS formulation. Simulations of the open cavity flow further show that the proposed schemes can accurately capture the periodic limit cycle caused by the supercritical Hopf bifurcation, confirming its effectiveness and fidelity for highly sensitive flow instability problems.

Explore related subjects

Keep this discovery

BibTeXRIS

Yujie Sun, Chi Ding, Ju Liu. 2025-12-07. Half-explicit Runge-Kutta integrators for variational multiscale turbulence modeling: Toward higher-order accuracy in space and time. https://arxiv.org/abs/2512.06626

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn