SearcharxivSearch

arXiv · 2512.14210

The Thermal Unbalance Effect Induced by a Journal Bearing in Rigid and Flexible Rotors: Experimental Analysis

Abstract

The present work presents the experimental analyses of a rigid (short) and a flexible (long) rotor subject to thermal unbalance effects. The rotors are supported by a ball bearing and by a cylindrical journal bearing. The differential heating generated in the journal bearing is responsible for the thermal unbalance. The results obtained with the short rotor at 7 krpm showed an increase in the synchronous amplitudes but slight phase changes before stabilization. The pronounced hysteresis of the synchronous amplitudes obtained during coast-down proved that the amplitude increase is due to the thermal unbalance. The results obtained for the long rotor at 6.6 krpm showed the same stabilized response when start-up was performed in 180___s. However, an instability leading to journal bearing contact was triggered when the start-up time was decreased to 80___s. The presented experimental results are the synchronous amplitudes and phases, the mean temperatures, and the maximum temperature differences of the journal and of the bearing and the phase lags between the high spot and the hot spot.

Explore related subjects

Keep this discovery

BibTeXRIS

Thibaud Plantegenet, Mihai Arghir, Mohamed-Amine Hassini, Pascal Jolly. 2025-12-16. The Thermal Unbalance Effect Induced by a Journal Bearing in Rigid and Flexible Rotors: Experimental Analysis. https://doi.org/10.1080/10402004.2019.1658836

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Projection Angles of Projectiles in Sports: Qualitative Assessment of the Effects of Aerodynamic Forces or Run-Up

We examine two major factors that influence the optimum projection angle: aerodynamic forces and the effect of run-up. With respect to aerodynamics, we consider not only the drag but also the lift generated by spin during flight. By linearizing the equations of motion that include these forces, we derive perturbation solutions with respect to drag and lift coefficients and clarify their qualitative effects. The results show that both drag and lift reduce the optimum projection angle, with the latter exerting a stronger influence. To investigate the effect of run-up, we use an extended projection model in which the initial speed depends on the initial angle. Analysis of this model reveals that a stronger run-up increases the relative projection angle but decreases the launch angle observed from the ground. These findings provide a mechanical explanation for the release angle in shot put and the takeoff angle in long jump. The present study establishes a simple theoretical framework for clarifying the respective roles of aerodynamic and run-up effects in determining the optimum projection angles in sports.

physics.class-ph

Dunkl-Based Modeling of Vibrational Modes in Lightweight Elastic Beams

Optimizing slender elastic structures for renewable energy applications requires non-classical continuum formulations capable of accounting for spatial micro-interactions without sacrificing analytical tractability. Here, we extend beam vibration mechanics by replacing standard spatial derivatives with the Dunkl differential operator. This modification introduces a reflection-coupled mathematical structure that accounts for spatial parity effects across the beam domain. We formulate the governing dynamic equations into a generalized eigenvalue problem and derive exact analytical expressions for modal characteristics under standard boundary conditions. The classical limit confirms exact convergence to classical Euler-Bernoulli formulations. Parametric analyses reveal that the Dunkl parameter acts as a reflection-induced modulation parameter, significantly shifting natural frequencies and altering the modal characteristics of higher modes. These results provide an analytical baseline for dynamic optimization in lightweight structural components.

physics.class-ph

A purely mechanical system realizing a Coulomb-like interaction

We solve in closed form a one-dimensional relativistic system: two masses interacting only through elastic collisions with a massless mediator bouncing between them. Momenta, times, and positions are hyperbolic functions of the collision index. The mediator energy, interpreted as the pair's effective potential, obeys an exact discrete Coulomb law, $V\propto 1/r$, with a Lorentz-invariant action as coupling. A massive Newtonian mediator instead transmits a $1/r^{3}$ force; one adiabatic invariant traces both laws to the mediator's dispersion relation. Continued to negative mediator energy, the closed forms turn trigonometric, binding a one-dimensional mechanical analog of the Coulomb atom.

physics.class-ph