Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2512.17783

Two-photon light-sheet live imaging at kilohertz frame rate using birefringence-based pulse splitting

Lei Zhu·Dale Gottlieb·Vincent Maioli·Antoine Hubert·Frédéric Druon·Pierre Mahou·Emmanuel Beaurepaire·Willy Supatto
View original source ↗Read source document ↗Export metadata ↓

Abstract

Multiphoton microscopy is widely used for live imaging. However, its acquisition speed remains limited by fluorophore emission rates and photodamage. To increase the pixel rate of a two-photon microscope beyond a few megahertz (MHz), multi-point parallelized schemes have been proposed. Two-photon (2P) light-sheet microscopy emerges as an effective approach for high-speed multiphoton imaging of live specimens, as it enables parallelized excitation while minimizing the required laser power. However, optimizing the signal-to-photodamage ratio in 2P light-sheet microscopy requires to precisely control the illumination parameters, including both wavelength and pulse frequency. Since conventional femtosecond laser sources generally do not allow independent modulation of these parameters, the development of low-cost, efficient and robust strategies to modulate the temporal excitation profile is essential to fully exploit the advantages of 2P light-sheet microscopy. Here, we introduce a compact pulse splitting scheme that meets these criteria. We used cascaded birefringent crystals to convert each excitation laser pulse into an adjustable sequence of collinear sub-pulses. We demonstrate its effectiveness in optimizing 2P light-sheet imaging of live zebrafish embryos. We analyze the impact of pulse splitting on photobleaching, nonlinear photodamage, and imaging performance. Additionally, we demonstrate high-speed 2P imaging of the beating heart and brain calcium dynamics using red fluorophores in live embryos. We achieve kilohertz imaging frame rate, reaching more than 150 MHz pixel rates with fluorescent signal levels above 10 $photons.pixel^{-1}$ using a laser mean power and a peak intensity in the range of 100 mW and 0.1 $TW.cm^{-2}$ at the sample, respectively. This adjustable pulse-splitting scheme allows full advantage to be taken of light-sheet illumination for fast in vivo 2P imaging.

Explore related subjects

physics.opticsphysics.app-phphysics.bio-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lei Zhu, Dale Gottlieb, Vincent Maioli, Antoine Hubert, Frédéric Druon, Pierre Mahou, Emmanuel Beaurepaire, Willy Supatto. 2025-12-19. Two-photon light-sheet live imaging at kilohertz frame rate using birefringence-based pulse splitting. https://doi.org/10.1364/optica.588084

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗
arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗
arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗