A Time-Domain Dual-Edge Asynchronous Pipelined SAR ADC Featuring Reset-Free Quantization at Multi-GS/s

Richard Zeng; Anthony Chan Carusone; Xilin Liu

Home/Archive/arXiv

arXiv · 2601.21308

A Time-Domain Dual-Edge Asynchronous Pipelined SAR ADC Featuring Reset-Free Quantization at Multi-GS/s

Richard Zeng·Anthony Chan Carusone·Xilin Liu

View original source ↗Read source document ↗Export metadata ↓

Abstract

Time-domain ADCs are attractive for high-speed wireline receivers, as time resolution scales favorably with advanced CMOS technologies, enabling multi-GS/s single-channel sampling rates. However, conventional time-domain ADCs require explicit reset of voltage-to-time and time-domain signal paths between samples, introducing dead time that fundamentally limits resolution, speed, and energy efficiency. This paper introduces a dual-edge reset-free quantization concept for asynchronous pipelined SAR time-domain ADCs, in which both rising and falling signal edges are exploited to enable reset-free quantization within a single conversion period. By eliminating explicit reset phases, the proposed approach expands the effective conversion window and relaxes the resolution-speed tradeoff at high sampling rates. An 8-bit dual-edge asynchronous pipelined SAR time-domain ADC is implemented in 22-nm FD-SOI, incorporating a linearity-compensated dual-edge voltage-to-time converter and a dual-edge time-to-digital converter with independently tunable rising- and falling-edge delays. The prototype occupies a core area of 0.0089 mm^2 and achieves continuous single-channel operation at 3.5 GS/s, with architectural scalability demonstrated through intermittent operation at 10.5 GS/s and higher. At 3.5 GS/s, the ADC achieves 21.6 dB SNDR and 32.2 dB SFDR. The measured performance is primarily limited by identifiable implementation-level factors rather than by architectural constraints, demonstrating the feasibility of dual-edge reset-free quantization for high-speed time-domain ADCs.

Explore related subjects

eess.SP cs.SY eess.SY

Keep this discovery

BibTeX RIS

Richard Zeng, Anthony Chan Carusone, Xilin Liu. 2026-01-29. A Time-Domain Dual-Edge Asynchronous Pipelined SAR ADC Featuring Reset-Free Quantization at Multi-GS/s. https://arxiv.org/abs/2601.21308

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

eess.SP↗

arXiv2026

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

eess.SP↗

arXiv2026

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

eess.SP↗