Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2601.22768

Electroactive morphing effects on the aerodynamic performance through wobulation around an A320 wing with vibrating trailing edge at high Reynolds number

C. Rouaix·C. Jiménez-Navarro·M. Carvalho·C. Raibaudo·J. Abou-Khalil·A. Marouf·Y. Hoarau·G. Harran·J. C. R. Hunt·H. Hangan·J. F. Rouchon·M. Braza
View original source ↗Read source document ↗Export metadata ↓

Abstract

This study aims to investigate the effects of electroactive morphing on a 70cm chord A320 wing by means of near trailing edge slight deformation and vibration. Wing morphing is performed by Macro Fiber Composites (MFC) mini-piezoelectric actuators distributed along the span of the ''Reduced Scale'' (RS) A320 prototype of the H2020 No 723402 European research project SMS, ''Smart Morphing and Sensing for aeronautical configurations'', (https://cordis.europa.eu/project/id/723402 and www.smartwing.org/SMS/EU). The configuration studied corresponds to a low-subsonic regime (Mach number 0.063) with a 10 degree incidence and a Reynolds number of 1 Million. The numerical simulations are carried out with the Navier-Stokes Multi-Block (NSMB) solver, which takes into account the deformation of the rear part of the wing implemented experimentally with the piezoelectric actuators. A detailed physical analysis of the morphing effects on the wake dynamics and on the aerodynamic performance is conducted with a constant amplitude of 0.7cm over a wide range of actuation frequencies [10-600]Hz. Optimal vibration ranges of [180-192]Hz and [205-215]Hz were found to respectively provide a 1% drag reduction and a 2% lift-to-drag ratio increase compared to the non-morphing (static) configuration. The natural frequencies associated with the shear layer Kelvin-Helmholtz (KH) vortices and the Von-Karman (VK) vortex shedding were found to play a central role in the modification of the wake dynamics by morphing as well as in the increase of the aerodynamic performance. Actuating at (or close to) the upper shear layer (USL) natural frequency (~185Hz) provides an order of 1% drag reduction and 1% lift-to-drag ratio increase, while actuating at (or close to) the lower shear layer (LSL) natural frequency (~208Hz) provides an order of 8% lift increase and 2% lift-to-drag increase. Furthermore, the linear variation of the actuation frequency over time, called wobulation, was shown to have significant effects. This approach demonstrated, through an appropriate mapping, the ability to quickly and efficiently detect optimal constant actuation frequency ranges providing aerodynamic performance increase and simultaneously reducing the amplitude of the main instability modes.

Explore related subjects

physics.class-ph

Keep this discovery

BibTeXRIS

C. Rouaix, C. Jiménez-Navarro, M. Carvalho, C. Raibaudo, J. Abou-Khalil, A. Marouf, Y. Hoarau, G. Harran, J. C. R. Hunt, H. Hangan, J. F. Rouchon, M. Braza. 2026-01-30. Electroactive morphing effects on the aerodynamic performance through wobulation around an A320 wing with vibrating trailing edge at high Reynolds number. https://arxiv.org/abs/2601.22768

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Projection Angles of Projectiles in Sports: Qualitative Assessment of the Effects of Aerodynamic Forces or Run-Up

We examine two major factors that influence the optimum projection angle: aerodynamic forces and the effect of run-up. With respect to aerodynamics, we consider not only the drag but also the lift generated by spin during flight. By linearizing the equations of motion that include these forces, we derive perturbation solutions with respect to drag and lift coefficients and clarify their qualitative effects. The results show that both drag and lift reduce the optimum projection angle, with the latter exerting a stronger influence. To investigate the effect of run-up, we use an extended projection model in which the initial speed depends on the initial angle. Analysis of this model reveals that a stronger run-up increases the relative projection angle but decreases the launch angle observed from the ground. These findings provide a mechanical explanation for the release angle in shot put and the takeoff angle in long jump. The present study establishes a simple theoretical framework for clarifying the respective roles of aerodynamic and run-up effects in determining the optimum projection angles in sports.

physics.class-ph↗
arXiv2026

Dunkl-Based Modeling of Vibrational Modes in Lightweight Elastic Beams

Optimizing slender elastic structures for renewable energy applications requires non-classical continuum formulations capable of accounting for spatial micro-interactions without sacrificing analytical tractability. Here, we extend beam vibration mechanics by replacing standard spatial derivatives with the Dunkl differential operator. This modification introduces a reflection-coupled mathematical structure that accounts for spatial parity effects across the beam domain. We formulate the governing dynamic equations into a generalized eigenvalue problem and derive exact analytical expressions for modal characteristics under standard boundary conditions. The classical limit confirms exact convergence to classical Euler-Bernoulli formulations. Parametric analyses reveal that the Dunkl parameter acts as a reflection-induced modulation parameter, significantly shifting natural frequencies and altering the modal characteristics of higher modes. These results provide an analytical baseline for dynamic optimization in lightweight structural components.

physics.class-ph↗
arXiv2026

A purely mechanical system realizing a Coulomb-like interaction

We solve in closed form a one-dimensional relativistic system: two masses interacting only through elastic collisions with a massless mediator bouncing between them. Momenta, times, and positions are hyperbolic functions of the collision index. The mediator energy, interpreted as the pair's effective potential, obeys an exact discrete Coulomb law, $V\propto 1/r$, with a Lorentz-invariant action as coupling. A massive Newtonian mediator instead transmits a $1/r^{3}$ force; one adiabatic invariant traces both laws to the mediator's dispersion relation. Continued to negative mediator energy, the closed forms turn trigonometric, binding a one-dimensional mechanical analog of the Coulomb atom.

physics.class-ph↗