On Capturing Laminar/Turbulent Regions Over a Wing Using WMLES

P. Balakumar; Prahladh S. Iyer

Home/Archive/arXiv

arXiv · 2602.11377

On Capturing Laminar/Turbulent Regions Over a Wing Using WMLES

P. Balakumar·Prahladh S. Iyer

View original source ↗Read source document ↗Export metadata ↓

Abstract

Wall-modeled large-eddy simulation (WMLES) is performed for flow over a wing with a focus on documenting grid resolution requirements to predict both the laminar and turbulent regions accurately. Flow over a spanwise extruded NACA0012 airfoil at 0-degree angle of attack and freestream chord-based Reynolds numbers of 3 million is simulated using an unstructured-grid finite-volume solver. An equilibrium wall function with the first off-wall grid point as the exchange location is used. Two scenarios are simulated wherein either the entire airfoil surface, or only a portion of it, is assumed turbulent based on linear stability calculations. For the latter scenario, the regular no-slip wall boundary condition is imposed in laminar regions. Using the same grid that was employed in the fully turbulent case, WMLES captured the skin friction in the turbulent region close to the RANS results. However, the skin friction is not well captured in the laminar region, due to far few grid points inside the boundary layer. When the near-wall grid was refined in the wall normal direction, the laminar region was captured accurately, but the turbulent region was not resolved well because the first off-wall point moved below the buffer-layer. To reconcile differing resolution requirements in the laminar and turbulent regions, a grid was generated based on the varying boundary layer thickness estimated from a precursor RANS simulation with a specified transition location. This grid produced improved results in the laminar region but resulted in a delayed transition location. Unsteady disturbances with the most amplified frequencies were introduced upstream of the neutral point. The transition process in the laminar region and the skin friction in the turbulent region were then captured satisfactorily.

Explore related subjects

physics.flu-dyn physics.comp-ph

Keep this discovery

BibTeX RIS

P. Balakumar, Prahladh S. Iyer. 2026-02-11. On Capturing Laminar/Turbulent Regions Over a Wing Using WMLES. https://arxiv.org/abs/2602.11377

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗