Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2603.23843

DMR effect on drag reduction of a streamlined body measured by Magnetic Suspension and Balance System

Aiko Yakeno·Hiroyuki Okuizumi·Kento Inokuma·Yoshiyuki Watanabe
View original source ↗Read source document ↗Export metadata ↓

Abstract

This study experimentally investigates the aerodynamic drag reduction capabilities of distributed micro-roughness (DMR) coatings on a streamlined model, utilising the 1-m magnetic suspension and balance system (MSBS) at Tohoku University. Previous direct numerical simulations (DNS) indicated that DMR can mitigate turbulent-energy growth by suppressing Tollmien--Schlichting (TS) waves and influencing the breakdown of streamwise vortices. The present work provides the first experimental validation of these effects using an interference-free MSBS, which is essential for accurate measurement in the laminar and transitional regimes. A streamlined model was tested with two rows of artificial tripping tape to induce transition; the DMR height was approximately 1% of the local boundary layer thickness, significantly smaller than typical roughness elements. Direct aerodynamic drag measurements using the MSBS revealed a substantial reduction of up to 43.6% within the transitional flow regime. Crucially, integrated analysis using wall-resolved large-eddy simulations (LES) and dynamic oil-flow visualisation confirmed that this benefit does not mainly originate from the suppression of flow separation. The LES drag decomposition established that the total pressure-drag budget is subordinate to skin friction, a finding complemented by oil-flow observations, which revealed qualitatively similar flow patterns regardless of the surface condition. Consequently, the observed drag reduction is primarily ascribed to friction drag reduction achieved through the modification of the boundary layer state. These findings provide compelling experimental evidence for the efficacy of DMR and offer valuable insights for optimising surface designs for passive flow control.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Aiko Yakeno, Hiroyuki Okuizumi, Kento Inokuma, Yoshiyuki Watanabe. 2026-03-25. DMR effect on drag reduction of a streamlined body measured by Magnetic Suspension and Balance System. https://arxiv.org/abs/2603.23843

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗