SearcharxivSearch

arXiv · 2606.06637

Reconfigurable Single-Ring Photonic Molecule on Lithium Niobate

Abstract

Resonant photonic structures enable optical enhancement and spectral filtering and are essential for lasers, quantum emitters, transducers, or modulators. Photonic molecules, formed by mode hybridisation in two coupled resonators, break the equidistant frequency spacing of zero-dispersion resonators and provide control over their spectrum. Reconfigurability over these devices is a key asset, allowing to align photonic resonances to target frequencies on-demand. While electro-optic materials such as thin-film lithium niobate (TFLN) have enabled frequency tuning beyond traditional thermo-optic effects, they require continuous bias, posing challenges to scalability. Here we demonstrate an optically programmable, erasable, and rewritable photonic molecule realized within a single TFLN racetrack resonator. A long-lasting photorefractive grating induced through interference of co-propagating dark and bright transverse modes promotes their hybridisation, forming a single-ring photonic molecule. We observe GHz-scale hybrid-mode splitting over a 700 GHz-wide optical bandwidth and hour-long lifetimes, and show that their coupling strength can be programmed by the optical pump used to write the grating. By selectively pumping orthogonal hybridised modes, we further demonstrate multiple reversible all-optical write-erase-rewrite cycles of these gratings. Finally, we use this technique to realize single-sideband mmWave transduction around 107 GHz with a 5 GHz tuning bandwidth. These results establish photorefraction as a reliable mechanism for reconfigurable resonances in TFLN, and suggest a route towards tunable microwave-optical functionalities within a reduced footprint.

Explore related subjects

Keep this discovery

BibTeXRIS

Tianyi Zhang, André Garcia Primo, Jiawen Liu, Aleksei Gaier, Ileana-Cristina Benea-Chelmus. 2026-06-04. Reconfigurable Single-Ring Photonic Molecule on Lithium Niobate. https://arxiv.org/abs/2606.06637

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics