Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2607.10005

Differentiable Fast Far-Field Transform in Cylindrical Coordinates for Large-Area Cascaded Metalens Optics

Arvin Keshvari·Ata Shakeri·William Tuxbury·Joon-Suh Park·Qing Wang·Wei-Ting Chen·Zin Lin
View original source ↗Read source document ↗Export metadata ↓

Abstract

We present a fully differentiable far-field transform in cylindrical coordinates for full-area point spread function (PSF) evaluation and optimization of large axisymmetric metalenses. The method computes wave-optical responses of apertures spanning thousands to tens of thousands of wavelengths in diameter (millimeter scales in the visible, centimeter scales in the infrared) in seconds, achieving three to four orders of magnitude speedup over Green's function integration while avoiding the prohibitive memory of two-dimensional FFTs. The approach decomposes vectorial near fields into parallel angular-momentum channels, applies FFTLog-accelerated Hankel transforms, and uses Graf's addition theorem to recenter focal fields under oblique illumination. Analytic adjoint gradients enable optimization with only ~65% overhead relative to a forward simulation. For a 4 mm-diameter aperture (~8000 wavelengths, ~12,600 azimuthal modes) at 30-degree incidence, a forward-adjoint iteration requires only ~12 s on a 350-thread CPU, making oblique optimization practical without ray-tracing approximations. Applied to polychromatic RGB (446/530/650 nm) metalens design at normal incidence, full-area PSF evaluation exposes efficiency limits hidden by conventional cropped-focal-spot analysis: a mono-pillar metalens that appears diffraction-limited achieves only ~6% average absolute focusing efficiency, while direct far-field optimization raises this to 37% (locally periodic approximation) and 51% (zoned discrete axisymmetry). A cascaded double-metasurface design reaches 63%, while a four-metasurface architecture attains 96% average relative efficiency. We also demonstrate millimeter-scale, oblique-incidence optimization of single-surface and doublet architectures; cascaded doublets enable partial coma correction inaccessible to a single rotationally symmetric surface.

Explore related subjects

physics.opticsphysics.app-ph

Keep this discovery

BibTeXRIS

Arvin Keshvari, Ata Shakeri, William Tuxbury, Joon-Suh Park, Qing Wang, Wei-Ting Chen, Zin Lin. 2026-07-10. Differentiable Fast Far-Field Transform in Cylindrical Coordinates for Large-Area Cascaded Metalens Optics. https://arxiv.org/abs/2607.10005

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗
arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗
arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗