SearcharxivSearch

arXiv · 2607.11686

Self-Healing Visual Recovery for Autonomous Ground Vehicles Using Camera-Only Visual Odometry

Abstract

Low-cost unmanned ground vehicles are often used in indoor places like warehouses, inspection corridors, and farm rows, where painted floor lines guide the robot. Line following is useful because it only needs one camera and little computing power, but it can fail when the line is blocked or turns sharply and goes out of view. Sensor-rich platforms tolerate this through hardware redundancy (LiDAR, GPS, multiple cameras), but camera-only systems must recover at runtime with no additional infrastructure. This paper presents a lightweight, two-stage recovery approach that restores guideline tracking without LiDAR, GPS, or a GPU. When the line is lost, the robot first turns in place while slowly relaxing its color checks and waiting for confirmation across multiple frames (Stage 1). If the line is still not found, monocular visual odometry moves the robot back to saved breadcrumb positions before it tries again (Stage 2). The system uses a depth-gated HSV line tracker, a YOLOv8n obstacle detector, and a visual odometry breadcrumb mapper, and it runs at 20 Hz on CPU-only hardware. The controller embeds a complete MAPE-K loop within a single 50 ms control tick, with no external adaptation manager required. The approach is evaluated across 119 fault-injected episodes on three Webots simulation courses. The method was successful in 86.6% of cases, with a median recovery time of 3.26 seconds. These results demonstrate that reliable visual recovery is feasible on camera-only UGVs within practical cost and computational limits.

Explore related subjects

Keep this discovery

BibTeXRIS

Jakob Solberg Berntzen, Safia Fatima, Leon Moonen. 2026-07-13. Self-Healing Visual Recovery for Autonomous Ground Vehicles Using Camera-Only Visual Odometry. https://arxiv.org/abs/2607.11686

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

IMLE-VLA: Fast Single-Step Action Generation for Vision-Language-Action Policies

Vision-language-action (VLA) policies leverage pretrained vision-language backbones to achieve strong cross-task generalization. A leading design couples this backbone with a dedicated continuous action head trained via diffusion or flow matching. However, such heads rely on iterative multi-step sampling, for example 10 Euler steps in $\pi_{0.5}$. This creates an inference bottleneck that produces stop-and-go movement in the robot and slower task completion. We introduce IMLE-VLA, which replaces the iterative action head with a single-step conditional generator trained via conditional Implicit Maximum Likelihood Estimation (cIMLE). The cIMLE objective promotes multimodal action coverage, avoiding the mode collapse of naive regression heads while eliminating multi-step sampling entirely. When IMLE-VLA is applied to $\pi_{0.5}$, it increases inference frequency 3.67x (55 Hz vs. 15 Hz), enabling up to 11x higher action throughput. On the 40-task LIBERO benchmark, IMLE-VLA achieves the highest average success rate (98.0%) among all baselines while leading in inference frequency. Under the test-time perturbations of LIBERO-plus, IMLE-VLA retains $\pi_{0.5}$'s robustness while other baselines degrade sharply, confirming that the cIMLE head preserves generalization. Real-world experiments on a Franka Emika Panda across four tasks demonstrate smoother motion (2.2x to 3.0x lower jerk) and faster task completion, with IMLE-VLA outperforming $\pi_{0.5}$ on every task and reducing average VLA inference time per episode by 3.9x to 6.6x. Videos and code are available at https://kianhk6.github.io/IMLE-VLA/

cs.RO

ObstaDiff: Generalizable Diffusion Policy Learning via Obstacle-aware Representations

Imitation learning has achieved impressive results in robotic manipulation, yet most existing approaches assume clean backgrounds and lack explicit mechanisms for obstacle-aware motion generation. Extending such policies to cluttered, real-world scenes with unstructured obstacles remains a key generalization challenge. We present ObstaDiff, a decomposed diffusion-policy framework with a lightweight obstacle-aware visual encoder. ObstaDiff extracts a structured target-obstacle-background representation, enabling the downstream alignment policy to generate end-effector trajectories toward a target-centered bottleneck pose while reasoning about surrounding obstacles. We evaluate ObstaDiff on 61 real-robot greenhouse trials per method (366 executions in total). ObstaDiff achieves 75.41% average task success and 8.20% average obstacle collision rate, outperforming representative imitation-learning baselines and improving generalization in cluttered agricultural scenes.

cs.RO

Testing Between the Test Cases: Proving End-to-End Steering in Conditions You Never Drove

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

cs.RO