Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2607.27903

Multi-Chirp AFDM for Rydberg Atomic Quantum Receivers: Waveform and Algorithm Design

Hanvit Kim·Hyeon Seok Rou·Kihong Min·Giuseppe Thadeu Freitas de Abreu·Sunwoo Kim
View original source ↗Read source document ↗Export metadata ↓

Abstract

We propose a multi-chirp affine frequency division multiplexing (MC-AFDM) scheme for joint delay-Doppler estimation with Rydberg atomic quantum receivers (RAQRs). The work is motivated by the fact that RAQRs, while offering superior sensitivity and advantageous sensing capabilities, suffer from an optical ambiguity due to Doppler shifts in doubly-dispersive (DD) channel caused by target mobility, which precludes the reliable estimation of delay-Doppler parameters. To resolve this optical ambiguity and unleash the potential of RAQRs in DD channel, the proposed MC-AFDM employs multiple distinct AFDM post-chirp signals to overcome the rank-deficiency problem of the classical single-chirp AFDM (SC-AFDM), thereby enabling accurate delay-Doppler estimation of multiple targets. Our analysis reveals that the edge distribution of the multiple post-chirp parameters can further improve estimation accuracy by minimizing the condition number. Building on the proposed MC-AFDM waveform, we design a sequential signal processing algorithm based on orthogonal matching pursuit (OMP) and least squares (LS), and we derive the theoretical lower bounds for delay and Doppler estimation. Numerical results show that the proposed MC-AFDM improves range and velocity estimation accuracy by up to two orders of magnitude compared to the classical SC-AFDM, and approaches its theoretical bounds through post-chirp optimization, validating the quantum-induced advantage of RAQRs for high-resolution quantum wireless sensing.

Explore related subjects

eess.SP

Keep this discovery

BibTeXRIS

Hanvit Kim, Hyeon Seok Rou, Kihong Min, Giuseppe Thadeu Freitas de Abreu, Sunwoo Kim. 2026-07-30. Multi-Chirp AFDM for Rydberg Atomic Quantum Receivers: Waveform and Algorithm Design. https://arxiv.org/abs/2607.27903

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Load Balancing in Multi-Shell LEO Satellite Networks with Successive Interference Cancellation

Multi-shell low Earth orbit (LEO) networks can increase service opportunities, but altitude-dependent propagation can concentrate traffic on lower shells and create strong inter-shell interference under full frequency reuse. This paper develops a mathematical framework for load balancing in multi-shell LEO satellite networks. Satellites on each shell form an independent spherical Poisson point process (SPPP), and the typical user associates with one of the per-shell serving satellites through a shell-dependent biased received-power rule, with receiver-side successive interference cancellation (SIC) under full frequency reuse. Shell-wise association probabilities, conditioned serving-distance distributions, and the rate coverage probability under shell-dependent traffic loads are derived and validated by simulation. The results show that shell-dependent biasing alleviates lower-shell traffic concentration and improves rate coverage, while receiver-side SIC mitigates the dominant lower-shell interference experienced by users associated with upper shells. Load balancing provides its largest rate-coverage gain in traffic hotspots, while SIC becomes more valuable as receive-side isolation weakens. With a fixed satellite budget, distributing satellites across multiple shells can further improve hotspot rate coverage by adding shell-wise serving opportunities.

eess.SP↗
arXiv2026

Tensor Decomposition Based Mixed-Field Sensing for XL-MIMO AFDM Systems

Integrated sensing and communications enabled by extremely large-scale MIMO (XL-MIMO) and affine frequency division multiplexing (AFDM) is a highly promising paradigm for vehicular networks. However, the near-field spherical wavefront distortions induce severe non-linear parameter coupling, while the highly dynamic scattering environments exacerbate mismatch errors. To address these critical challenges, this paper proposes a novel tensor-based sensing scheme for XL-MIMO AFDM systems. First, the received signals are reformulated into a tensor, followed by an efficient decomposition approach that exploits the inherent Vandermonde structure of the factor matrices. This allows parameters to be directly estimated from the decomposed matrices, effectively avoiding inter-parameter coupling. Subsequently, a symmetric decoupling and real-domain manifold optimization algorithm is proposed for angle of arrival estimation, circumventing the high-dimensional searches typically induced by near-field effects. Furthermore, a baseband reconstruction and analytical gradient-based algorithm is developed to perform delay-Doppler estimation in the continuous parameter domain, fundamentally eradicating the grid-mismatch errors inherent in high-mobility scenarios. With these decoupled factors, the remaining unknown angle of departure can be readily extracted. Extensive simulation results demonstrate that the proposed scheme achieves orders-of-magnitude improvements in delay-Doppler accuracy and eliminates the error floors in angular estimation that severely bottleneck state-of-the-art baselines.

eess.SP↗
arXiv2026

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

eess.SP↗