Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2609.03761

Robot Aware Computational Design of Object Specific Passive Grippers for Additive Manufacturing

Abdullah Yahya Abdullah Omaisan·Ibrahim Sheikh Mohamed
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper presents an end-to-end computational pipeline that converts a selected object mesh, a measured object state, and a selected six-axis robot into an object-specific, unactuated, additively manufacturable gripper. The method couples exact-mesh RGB-D/ICP pose registration, deterministic surface-contact sampling, uncertainty-aware wrench screening, selection among six passive capture mechanisms, object-conformal surface synthesis, full-orientation robot inverse kinematics, a swept-volume-aware manufacturing domain, directional fused-deposition finite-element screening, and constrained three-dimensional SIMP topology optimization. Unlike workflows that treat grasp selection, tool geometry, motion, and structural design as separate problems, every exported design is bound to the source mesh, object pose, robot flange, contact set, and insertion hypothesis by a traceable design identifier. We derive the implemented registration, contact, fit-tolerance, finite-element, and density-optimization equations and prove three properties of the numerical construction: nodal load preservation, monotonic compliance sensitivity under SIMP interpolation, and voxel-domain containment after topology post-processing. Four archived object-specific attempts - a rabbit, camera flange, 3DBenchy, and faceted bust - meet the nominal fit, uncertain-wrench, runtime-sweep, and baseline/post-topology FEA gates. A deliberately enlarged +/-3 mm, +/-5 degree pose stress check differentiates the designs, retaining 29-134 of 160 simulated trials. Their reconstructed topologies retain 92.0-97.6% of the FE domain because functional regions are protected. Archived robot photographs show the corresponding printed assemblies qualitatively, while nominal material properties and absent coupon-calibrated, instrumented tests keep all four at digital-screening status rather than operational release.

Explore related subjects

cs.RO

Keep this discovery

BibTeXRIS

Abdullah Yahya Abdullah Omaisan, Ibrahim Sheikh Mohamed. 2026-09-03. Robot Aware Computational Design of Object Specific Passive Grippers for Additive Manufacturing. https://arxiv.org/abs/2609.03761

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

cs.RO subject

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related papers

arXiv2026

Adaptive Bridge: A Proxy-Based Decoupling Layer for Mitigating DDS Backpressure in ROS 2

In systems built on Robot Operating System 2 (ROS 2) and using Data Distribution Service (DDS), a single network-impaired or throttled subscriber on a RELIABLE topic can cause backpressure that degrades throughput and latency for all other subscribers, including safety-critical ones sharing the publisher, because the publisher's DDS writer can no longer accept new samples. We present Adaptive Bridge, a proxy-based layer that decouples critical subscribers from degraded or noncritical ones, thereby isolating the critical path through topic splitting and dynamic rate control. The proxy acts as a middleman and subscribes to the original topic and republishes the messages to two independent DDS writers: one RELIABLE writer for critical nodes and one BEST EFFORT writer for noncritical or degraded nodes, thus isolating the degraded nodes and safeguarding the publisher and critical nodes from backpressure. A probe-based classifier actively monitors subscriber health through sampling with hysteresis and adjusts subscriber rate limits in real time. We evaluate the system under a Gilbert-Elliott bursty wireless loss model using a reproducible Docker-based harness. The results show that using the Adaptive Bridge in our evaluation harness reduces the critical subscriber tail p95 latency from up to 15 s to 1.55 ms across all impairment severities while preserving the publisher's configured throughput.

cs.NI↗
arXiv2026

SMILE: Smooth Motion for Improved Long-Horizon VLA Execution

Vision-Language-Action (VLA) models reduce inference cost by executing multiple actions per call, but longer horizons often degrade accuracy because raw chunks contain jitter and outliers. We introduce SMILE, an architecture-preserving interface that predicts B-spline coefficients and decodes them into smooth action sequences. SMILE changes only the action representation, enabling longer fixed horizons while retaining each baseline's backbone and model scale. We apply SMILE to SmolVLA, Evo1, VPP, and DAWN, improving accuracy and amortized inference efficiency across LIBERO, CALVIN, and real-world experiments. SMILE-Evo1 reaches 98.0% with a 1.1x speedup on LIBERO, while SMILE-VPP reaches an average length of 4.42 with a 1.5x speedup on CALVIN. At a matched execution horizon of 10, SMILE-SmolVLA reduces non-boundary acceleration by 78.6% and velocity sign-change rate by 42.3%. Real-world xArm tests show higher success, fewer drops, and fewer contacts. These results establish smooth coefficient-space generation as a route to accurate, efficient long-horizon VLA execution. Project page: jongwoopark7978.github.io/smilevla

cs.RO↗
arXiv2026

Establishing a Dynamic Multimodal HRI Dataset for Engagement Analysis with a Humanoid Robot

This paper presents an experimental design for constructing a multimodal dataset to analyze user engagement in human-robot interaction (HRI). Prior studies have mainly relied on observable behavioral cues, with limited frameworks integrating physiological signals. We therefore propose a structured data-collection protocol to build a multimodal dataset that includes wearable physiological signals, behavioral data, and self-report measures under different levels of task complexity defined in this experiment.

cs.RO↗