Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2609.07270

Magnetic characterization of electronic components for portable atomic sensors using a zero-field optically pumped magnetometry platform

Hyeonjae Kim·Sangkyung Lee·Sin Hyuk Yim·Taek Jeong·Younghoon Lim
View original source ↗Read source document ↗Export metadata ↓

Abstract

We present a zero-field optically pumped magnetometry platform for magnetic characterization of a photodetector (PD) board and a resistance temperature detector (RTD) used in a portable atomic magnetometer. For each component, the static magnetic field along the measurement axis is determined from the shift in the center of the dispersive response, while response distortion caused by off-axis magnetic-field components is assessed from the absorptive admixture. Magnetic-field noise is evaluated based on the quadrature difference in the amplitude spectral density (ASD). The platform achieved a -3 dB bandwidth of 71.5 Hz and a median ASD of 57.6 $\mathrm{fT}/\sqrt{\mathrm{Hz}}$ over 20-70 Hz. For the unpowered PD board, static magnetic fields of approximately 8 nT in magnitude and opposite signs were measured in the front- and back-facing orientations. The back-facing orientation also exhibited a degraded dispersive response consistent with magnetic-field inhomogeneity. The magnetic-noise contributions associated with the PD board were estimated at 36.0 and 63.2 $\mathrm{fT}/\sqrt{\mathrm{Hz}}$ in the front- and back-facing orientations, respectively. By contrast, operation of the RTD readout generated a static magnetic field of -0.6 nT, with no measurable response degradation or additional magnetic-field noise. These results provide guidance for the design and placement of electronic components in portable atomic magnetometers targeting sensitivities below 0.1 $\mathrm{pT}/\sqrt{\mathrm{Hz}}$.

Explore related subjects

physics.atom-phphysics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hyeonjae Kim, Sangkyung Lee, Sin Hyuk Yim, Taek Jeong, Younghoon Lim. 2026-09-07. Magnetic characterization of electronic components for portable atomic sensors using a zero-field optically pumped magnetometry platform. https://arxiv.org/abs/2609.07270

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph↗
arXiv2026

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph↗
arXiv2026

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph↗