SearcharxivSearch

arXiv · 2609.20629

RTK-Vision PPO for Autonomous Micro UAV Recovery on an Airborne Carrier

Abstract

Autonomous recovery of a micro unmanned aerial vehicle (UAV) onto a moving airborne carrier enables reusable deploy-mission-recover operation, but couples long-range rendezvous, close-range perception, carrier motion, aerodynamic interaction, and a discontinuous contact event. This paper presents an RTK-vision-guided reinforcement-learning framework in which a child UAV is physically transported by a larger carrier, takes off from the carrier while airborne, executes an independent sortie, returns to the carrier's current position, redocks, and subsequently descends with the carrier. Both vehicles carry RTK-GNSS, and the carrier continuously shares its navigation state with the child. Near the recovery deck, RTK remains active while a downward-facing camera with a fiducial marker detector provides marker-relative alignment cues. A proximal policy optimization (PPO) policy governing the terminal recovery phase is trained in a physics-based MuJoCo simulation environment with explicit sensor noise models, an aerodynamic disturbance surrogate, and marker-latency randomization, then transferred to hardware. PX4 retains low-level stabilization, and a deterministic safety gate authorizes descent independently of the learned policy. The PPO checkpoint achieves 99.55% success over 2,000 held-out randomized terminal episodes, compared with 78.4% for a tuned PD baseline under identical conditions, with a median planar terminal error of 6.62 cm. Across 14 outdoor trials, the full mission succeeds in 13 trials (92.9%), spanning both near-region recovery and recovery after the carrier translates away from the release point. The results demonstrate a complete autonomous aerial deployment-and-recovery cycle rather than an isolated landing maneuver, establishing a practical basis for reusable carrier-child operation in inspection, surveillance, and mobile-logistics applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Aashish Sahu, R Prasanth Kumar. 2026-09-17. RTK-Vision PPO for Autonomous Micro UAV Recovery on an Airborne Carrier. https://arxiv.org/abs/2609.20629

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO