SearcharxivSearch

arXiv · 2609.25687

SG-CPG: Severity-Gated Central Pattern Generators for Adaptive Quadruped Locomotion under Continuous Actuator Degradation

Abstract

An animal with a weakened limb does not necessarily switch its gait, instead it unloads the affected limb, re-coordinates the remaining limbs, and scales its response with injury severity. This graded adaptation allows locomotion to persist despite partial loss of limb strength, rather than requiring a discrete transition between healthy and failed. Inspired by this behavior, we propose SG-CPG, a central pattern generator (CPG) for quadruped locomotion under continuous actuator degradation. SG-CPG preserves a frozen healthy CPG policy and introduces two severity-driven gates: a residual gate that re-coordinates all four legs and an amplitude gate that progressively shortens the weakened leg's stride as degradation increases. We emulate progressive degradation through two mechanisms: lowering the joint torque ceiling (ceiling mechanism) and scaling its low-level controller gains (gain mechanism), representing distinct forms of actuator weakening. Our simulations on a Unitree Go2 show that SG-CPG maintains a trot gait with 100% survival across an omnidirectional command schedule under 95% joint strength loss while tracking commands within 8%. Under a lowered torque ceiling, removing either severity path, the residual's severity observation or the amplitude gate, raises clipping at the weakened joint from 4.4% to 13.6% and 26.3% of steps at an 80% loss. On a real Go2, SG-CPG survives 28 of 29 forward and turning trials with up to 93% calf torque degradation. These results show that severity-gated adaptation can extend a healthy locomotion policy to progressive actuator degradation without treating the fault as a discrete failure.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Adarsh Kumar Kosta, Kaushik Roy. 2026-09-22. SG-CPG: Severity-Gated Central Pattern Generators for Adaptive Quadruped Locomotion under Continuous Actuator Degradation. https://arxiv.org/abs/2609.25687

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

J-PARSE: Jacobian-based Projection Algorithm for Resolving Singularities Effectively in Inverse Kinematic Control of Serial Manipulators

J-PARSE is an algorithm for smooth first-order inverse kinematic control of a serial manipulator near kinematic singularities. The commanded end-effector velocity is interpreted component-wise, according to the available mobility in each dimension of the task space. First, a substitute ''Safety'' Jacobian matrix is created, keeping the aspect ratio of the manipulability ellipsoid above a threshold value. The desired velocity is then projected onto non-singular and singular directions, and the latter projection scaled down by a factor informed by the altered mobility. A right-inverse of the non-singular Safety Jacobian is applied to the modified command. In the absence of joint limits and collisions, this ensures safe transition into and out of low-mobility configurations, guaranteeing locally stable reaching behavior towards target poses within, on the boundary of, and outside the workspace. The behavior is further guaranteed to be locally asymptotically stable if the starting and target configurations are not exactly singular, even if they are nearly singular. Velocity control with J-PARSE is benchmarked against approaches from the literature, illustrating its use of a single tuning parameter to simultaneously achieve high reaching accuracy and stable behavior. Applications in teleoperation, servoing, and learning are demonstrated. Videos and code are available at https://jparse-manip.github.io/.

cs.RO

NeMo-map: Neural Implicit Flow Fields for Spatio-Temporal Motion Mapping

Safe and efficient robot operation in complex human environments can benefit from good models of site-specific motion patterns. Maps of Dynamics (MoDs) provide such models by encoding statistical motion patterns in a map, but existing representations use discrete spatial sampling and typically require costly offline construction. We propose a continuous spatio-temporal MoD representation based on implicit neural functions that directly map coordinates to the parameters of a Semi-Wrapped Gaussian Mixture Model. This removes the need for discretization and imputation for unevenly sampled regions, enabling smooth generalization across both space and time. Evaluated on two public datasets with real-world people tracking data, our method achieves better accuracy of motion representation and smoother velocity distributions in sparse regions while still being computationally efficient, compared to available baselines. The proposed approach demonstrates a powerful and efficient way of modeling complex human motion patterns and high performance in the trajectory prediction downstream task. The code is publicly available at https://github.com/test-bai-cpu/nemo-map.

cs.RO

Spatiotemporal Calibration of Doppler Velocity Logs for Underwater Robots

The calibration of extrinsic parameters and clock offsets between sensors for high-accuracy performance in underwater SLAM systems remains insufficiently explored. Existing methods for Doppler Velocity Log (DVL) calibration are either constrained to specific sensor configurations or rely on oversimplified assumptions, and none jointly estimate translational extrinsics and time offsets. We propose a Unified Iterative Calibration (UIC) framework for general DVL sensor setups, formulated as a Maximum A Posteriori (MAP) estimation with a Gaussian Process (GP) motion prior for high-fidelity motion interpolation. UIC alternates between efficient GP-based motion state updates and gradient-based calibration variable updates, supported by a provably statistically consistent sequential initialization scheme. The proposed UIC can be applied to IMU, cameras and other modalities as co-sensors. We release an open-source DVL-camera calibration toolbox. Beyond underwater applications, several aspects of UIC-such as the integration of GP priors for MAP-based calibration and the design of provably reliable initialization procedures-are broadly applicable to other multi-sensor calibration problems. Finally, simulations and real-world tests validate our approach.

cs.RO