Searcharxiv⌕ Search

arXiv · 2609.30923

Improving Multi-Delay-ASL through specialized reconstruction

Abstract

Purpose: Although image reconstruction has received relatively little attention in ASL research to date, it has the potential to address several challenges in ASL. As well as speeding up measurements by increasing undersampling and reducing measurement artifacts, it can improve the signal-to-noise ratio (SNR) of a given data set and the reproducibility of examinations. Methods: This work focuses on extending a dedicated ASL reconstruction approach (ASL-TGV) (Spann et al. (2020)) to multi-delay data and applying it to a high-resolution pCASL test-retest dataset. To show not only improvement in the Perfusion Weighted Images (PWIs), Cerebral Blood Flow and Arterial Transit Time was estimated and the test-retest reliability was estimated using the within subject Coefficient of Variance (wsCV), the Intraclass Correlation Coefficient (ICC) and Root-Mean-Squared-Error (RMSE). Results: The Perfusion-Weighted-Images reconstructed from highly undersampled single-shot data using ASL-TGV are clearly improved compared to a fully-sampled reference from the same data even after denoising, especially for long PLDs and the outermost slices. SNR calculated in grey and white matter ROIs shows an improvement of 62\% and 35\% respectively. The CBF maps produced from the ASL-TGV images have an improved test-retest reliability. Conclusion: ASL-TGV, which is now implemented in the Berkeley Advanced Reconstruction Toolbox (BART), can be used with any type of ASL labeling or data acquisition and any existing image post-processing pipeline and can improve SNR for the PWIs and reproducibility of the CBF maps.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ingmar Sorgenfrei, Qinyang Shou, Ingrid Barth, Martin Uecker, Danny JJ Wang, Rudolf Stollberger. 2026-09-25. Improving Multi-Delay-ASL through specialized reconstruction. https://arxiv.org/abs/2609.30923

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

A 2D autocorrelation-based frequency estimator reflecting spatial tissue distribution to improve Ultrasound H-scan tissue characterization

H-scan is a promising quantitative ultrasound technique that estimates the frequency content of backscattered signals and maps the estimated frequencies onto a red/blue color scale to reflect underlying tissue properties. Although it relies on matched filters tuned to different frequencies, the broad spectral bandwidth of ultrasound produces noisy, granular displays. Here, we introduce an adaptive frequency estimator designed to suppress the noise within homogeneous regions while preserving sharpness across tissue boundaries. The method combines 2D autocorrelation with a matched filter. In the first stage, a matched-filter-based estimation yields an a priori map of the spatial distribution of frequencies. The local heterogeneity of these estimates then defines a 2D weighting function that guides a second estimation stage. Drawing on the concept of Loupas's blood velocity estimator, we apply autocorrelation over a 2D spatial kernel to recover the axial frequency components, employing a weighted summation that accounts for the spatial frequency distribution within the kernel. We benchmarked the proposed estimator against conventional approaches, including the short-time Fourier transform, the H-scan matched filter, and standard autocorrelation, using both Field II simulations and in vivo data from human subjects with hepatic steatosis. In simulation, our adaptive estimator reduced the noisy texture in homogeneous regions while retaining clear boundary delineation, whereas the other estimators could achieve only one of these objectives. Applied to the in vivo human liver, the estimator improved H-scan image quality by lowering noise and enhancing the discrimination of steatotic liver from adjacent gallbladder and skin layers.

physics.med-ph↗

Fingertip Micro-Motion as a Source of Respiratory Information During Sleep Using Triaxial Accelerometers

Objective: Triaxial accelerometers (TAAs) are widely used in home care medicine. This study investigates whether TAA signals recorded at the fingertip encode respiratory information, particularly instantaneous respiratory rate (IRR) and respiratory effort, during sleep. Method: We propose an antiderivative-based nonlinear transformation to convert TAA signals into a respiratory surrogate, termed TAA-resp. To quantify the embedded respiration-induced oscillation, a modern time-frequency analysis tool is applied to derive an index, referred to as the {\em respiratory motion index} (RMI). The proposed TAA-resp and RMI are validated on two datasets comprising 39 Asians and 10 white or African Americans with full-night recordings from simultaneous polysomnography (PSG) and a fingertip TAA measurement. Criteria for labeling TAA-resp signal quality as good, moderate, or poor are established, and two experts' independent annotations with consensus are obtained. Result: On average, TAA-resp encodes high-quality respiratory information in over 21.25%$\pm$16.11% of full-night recordings, reaching up to 58.33% in some cases. TAA-resp shows stronger correlation with thoracic and abdominal motion than with airflow, indicating predominant capture of respiratory effort. High-quality TAA-resp segments offer an accurate IRR estimate with root mean square error $0.027\pm 0.022$ Hz. RMI is higher for high-quality segments and lower for poor-quality segments, and its distribution aligns with physiology, with higher values during REM, N2, and N3 sleep and in the absence of apnea or hypopnea events. In leave-one-subject-out cross-validation, RMI predicts quality labels with 0.84 sensitivity and 0.88 specificity. Conclusion: Fingertip-mounted TAAs encode meaningful respiratory information intermittently, and our method recycles underutilized respiratory information.

physics.med-ph↗

Characterization and Mitigation of Boundary Sampling Artifacts in Electron Phase Space Generation for Clinical FLASH-RT Deployment

Applicator-specific phase space (PHSP) files recorded at the aperture exit reduce Monte Carlo dose calculation time by 30-50% for electron FLASH radiotherapy. However, positioning PHSP scoring planes coincident with the applicator-air interface introduces boundary sampling artifacts. This study characterizes these artifacts in Geant4-based simulations and demonstrates their mitigation. PHSP files were generated using GAMOS 6.2.0 for a 9 MeV Mobetron UHDR model across twelve clinical aperture configurations (2.5-10 cm diameter). Three scoring plane positions were evaluated relative to the physical aperture exit: coincident with the interface, 0.1 mm downstream, and 1 mm downstream. Scoring at the exact interface produced proximal R50 shifts of up to 2.2 mm and Distance-to-Agreement (DTA) values of 4-6 mm, exceeding clinical acceptance criteria. Artifact severity scaled inversely with aperture diameter, with the smallest configurations most severely affected. A 0.1 mm offset partially restored the primary electron energy spectrum but failed to recover the bremsstrahlung tail. A 1 mm offset fully resolved all artifacts, achieving mean DTA values within 2.0 mm, equivalent to or better than linac-exit references. These artifacts arise from the degenerate behavior of the fUseSafety step-limitation algorithm when safety equals zero at exact material boundaries, producing incomplete secondary electron equilibration and suppressed bremsstrahlung production. Angular distribution analysis revealed a near-forward particle pileup in the 0 mm PHSP and a deficit of large-angle secondaries recovered by the 1 mm offset. A 1 mm downstream offset fully mitigates these artifacts while introducing negligible perturbation to primary beam characteristics. This requirement applies to any Geant4-based framework (including TOPAS and GATE) scoring PHSP files at material exit surfaces.

physics.med-ph↗