Compressible unsteady aerodynamics of finite-chord porous aerofoils

Seongkyu Lee

Home/Archive/arXiv

arXiv · 2609.33783

Compressible unsteady aerodynamics of finite-chord porous aerofoils

Seongkyu Lee

View original source ↗Read source document ↗Export metadata ↓

Abstract

A unified linear theory is developed for the unsteady loading of finite-chord aerofoils, rigid or porous, in compressible subsonic flow. The formulation combines Possio's integral operator with a convective permeable boundary condition, allowing chordwise-varying admittance while retaining the wake and unsteady Kutta condition. The loading exponents at aerofoil edges and admittance discontinuities keep their incompressible form in terms of the local permeability parameter, so weighted-Jacobi collocation carries over. The solution is verified against published incompressible results and an independent compressible formulation. Gust and heave responses and their indicial counterparts reveal that permeability controls the sensitivity of unsteady loading to compressibility. As permeability increases, the material impedance rather than the surrounding flow sets the pressure jump, but only gradually: at Mach number 0.7 the gust load on a weakly permeable surface changes by a third to a half, and closed-form steady and high-frequency limits for resistive surfaces show that it vanishes only when the permeability parameter greatly exceeds the Mach number. The porous-to-impermeable load ratio, by which a treatment is judged, cannot be obtained by combining incompressible porous and compressible rigid theories, which misjudge it by up to a factor of two. Incompressible theory overestimates this ratio for an acoustically compact chord and underestimates it for a non-compact one, by factors of 1.4 to 4.3 at Mach numbers 0.5 to 0.7 and reduced frequencies 5 to 20, overstating the load reduction. Since compactness depends on Mach number times reduced frequency, the error persists at low speed, exceeding 10 per cent at Mach number 0.05 for reduced frequencies above 10.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Seongkyu Lee. 2026-09-27. Compressible unsteady aerodynamics of finite-chord porous aerofoils. https://arxiv.org/abs/2609.33783

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Leading-edge noise reduction by perforated and porous inserts: a compressible finite-chord prediction without fitted constants

Porous and perforated leading edges reduce turbulence-interaction noise, but predictions of the reduction have relied on material impedances adjusted to the acoustic data. This paper removes that adjustment. The finite-chord scattering problem is solved in compressible subsonic flow for an arbitrary chordwise admittance, with the shed wake, the Kutta condition and permeability-dependent edge singularities, and closed to the far field with the finite span and the array aperture represented. The admittance of a perforated insert is derived from the Rayleigh conductivity of one aperture with three computed corrections: plate thickness, interaction between neighbouring apertures, and Howe's grazing-flow blockage evaluated at the aperture-averaged velocity of the boundary layer. A bulk porous insert is represented by its measured permeability and pore-fluid inertia. For three perforates at four flow conditions the prediction agrees with measurements to 2.5 dB rms over 84 comparisons, against 4.4 dB with the unscaled impedance used previously. Although the Mach number is 0.05, the chord is acoustically non-compact, and an incompressible solution rises where the measurement falls. Two of three bulk porous inserts are predicted to within 1.7 dB rms where interaction noise dominates. Narrow, equally spaced peaks measured on perforated plates are reproduced by none of the admittances tested; their spacing implies a source convecting at 0.62 of the free-stream speed, absent from a frozen-gust model. A parameter study shows that the perforate geometry acts almost entirely through one low-frequency admittance group, in which the hole radius cancels for holes buried in the laminar boundary layer.

physics.flu-dyn↗

arXiv2026

Adjoint-based shape optimization of a ship hull using a Conditional Variational Autoencoder (CVAE) assisted propulsion surrogate model

Adjoint-based shape optimization of ship hulls is a powerful tool for addressing high-dimensional design problems in naval architecture, particularly in minimizing the ship resistance. However, its application to vessels that employ complex propulsion systems introduces significant challenges. They arise from the need for transient simulations extending over long periods of time with small time steps and from the reverse temporal propagation of the primal and adjoint solutions. These challenges place considerable demands on the required storage and computing power, which significantly hamper the use of adjoint methods in the industry. To address this issue, we propose a machine learning-assisted optimization framework that employs a Conditional Variational Autoencoder-based surrogate model of the propulsion system. The surrogate model replicates the time-averaged flow field induced by a Voith Schneider Propeller and replaces the geometrically and time-resolved propeller with a data-driven approximation. Primal flow verification examples demonstrate that the surrogate model achieves significant computational savings while maintaining the necessary accuracy of the resolved propeller. Optimization studies demonstrate that neglecting the propulsion system can result in hull designs whose performance is inferior to that of the initial shape when subsequently validated using a numerically resolved propulsor. In contrast, the proposed method produces shapes that actually achieve more than an 8% reduction in resistance.

physics.flu-dyn↗

arXiv2026

Control of deterministic breakdown to turbulence of hypersonic boundary layer with spanwise non-uniform surface temperature

Direct Numerical Simulation (DNS) of a Mach 6 boundary layer over a flat plate is performed to assess the effect of spanwise non-uniform surface temperature on breakdown to turbulence under deterministic forcing. The streamwise location of laminar to turbulent transition in hypersonic boundary layers has a significant influence on viscous drag and aerodynamic heating of external surfaces of hypersonic vehicles. Previous work investigated the stabilization of hypersonic boundary layers by optimally growing streaks. More recently, DNS for a hypersonic boundary layer showed that it is possible to generate streaks through a spanwise non-uniform surface temperature distribution. The laminar computations showed the control method can stabilize the second Mack mode and it is robust across a range of Mach numbers and wall temperature ratios. In this work, two scenarios are investigated where two-dimensional (second Mack mode) and oblique (first Mack mode) disturbances dominate the initial linear stage of transition. It is found that weak control streaks with amplitude below 5% of the freestream velocity can reduce high-frequency shear-stress due to the second Mack mode by approximately 30% relative to the uncontrolled configuration, and delay transition. For first Mack mode dominated breakdown, the control streaks have no effect on transition location, but the peak amplitude of the spanwise-integrated wall heat flux is reduced. For the first and second Mack mode-dominated scenarios, the mean and high-frequency peak heat transfer are reduced approximately by 15% and 34%, respectively. The dominant mechanisms are identified and attributed to the pressure work contribution to turbulent kinetic energy and the second Mack mode dilatation work.

physics.flu-dyn↗