Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2610.36862

Stiffness coefficients in granular micromechanics determined with three-point bending experiments and digital image correlation for a bimodulus material

Mohammad Mahdi Nayeban·Bilen Emek Abali·Reza Afshar·Francesco Fabbrocino·Anil Misra·Luca Placidi
View original source ↗Read source document ↗Export metadata ↓

Abstract

This study presents an inverse analysis to determine the stiffness parameters of a bimodulus constitutive model formulated within a granular micromechanics framework. Full-field normal strain measurements are obtained by Digital Image Correlation (DIC) during three-point bending tests and are used as experimental input to a hybrid numerical optimization procedure. The experimental campaign is designed to ensure that the measured strain fields remain within the elastic regime. Since the identification is formulated as a nonlinear regression problem, a physically informed initial parameter set is constructed to guide the optimization toward mechanically meaningful values. An initial estimate of the compressive stiffness is first obtained from the available manufacturer data. The tension-compression stiffness asymmetry is then estimated from the experimentally measured neutral-axis shift, which provides a macroscopic signature of bimodulus material behavior in bending. These estimates define the initial parameter set, which is subsequently refined through a hybrid optimization procedure based on the full-field comparison of the experimental and numerical normal strain distributions. The identified parameter set enables the numerical model to reproduce more closely both the through-depth profile and the spatial distribution of the normal strain component over the selected surface region. These results demonstrate that full-field normal strain measurements provide an effective basis for identifying the stiffness parameters of bimodulus granular micromechanics models. The largest differences between the numerical and experimental strain fields are observed near the load-application region, where localized strain variations are induced by the concentrated load.

Explore related subjects

cs.CE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mohammad Mahdi Nayeban, Bilen Emek Abali, Reza Afshar, Francesco Fabbrocino, Anil Misra, Luca Placidi. 2026-10-27. Stiffness coefficients in granular micromechanics determined with three-point bending experiments and digital image correlation for a bimodulus material. https://arxiv.org/abs/2610.36862

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Algebraic Operations on Tensor Trains

The tensor train (TT) model is widely used to approximate high-dimensional tensors, enabling efficient handling of data that may exceed available memory. TT helps address the curse of dimensionality in applications such as system identification and dynamic programming. In some applications, TT is known as a ``matrix product state" (MPS). The last product is also known under the acronym MPO--MPS. The proposed algorithms achieve an improved trade-off between computational efficiency and accuracy compared to state-of-the-art methods.

cs.CE↗
arXiv2026

Advancing global crop simulations with differentiable modelling

Global gridded crop models (GGCMs) are crucial for assessing the performance of food producing systems, for example under climate change or their contribution to environmental challenges. However, systematic calibration of their parameters remains a long-standing challenge. Persisting uncertainties in these parameters propagate into future crop projections, thereby affecting and potentially biasing food security assessments. Here we present a fully process-based differentiable GGCM implementation that offers a fundamentally new approach to parameter calibration, uncertainty quantification, yield loss attribution, and management optimization. Using automatic differentiation, we optimize selected model parameters against site-scale carbon and water flux observations, reducing normalized root-mean-square errors at held-out sites by 24.8-36.2% compared to the default state-of-the-art model. Without calibration against yield data, the optimized model better captures detrended yield anomalies across 61.2-64.3% of global crop area and reduces low-yield errors by 3.4-43.5% for wheat, rice, maize and soybean. It also ranks among the best performers in comparison with GGCMI Phase 3 models. Future simulations show that calibration reduces the projected end-of-century rice production increase from 55.1% to 22.1% under SSP5-8.5. Parameter ensembles further reveal that parameterizations with comparable historical skill can produce markedly different future production responses. Beyond calibration, differentiability enables the attribution of crop losses under extreme events and supports the design of adaptive crop management strategies. For the 2018 European drought, we identify spring heat and water limitation as major contributors to wheat yield losses and develop more effective irrigation strategies for mitigating simulated regional yield losses.

cs.CE↗
arXiv2026

A hyper-reduction strategy for elastoplastic hydro-mechanical problems in partially saturated soil

This work proposes a hyper-reduced order model for coupled hydro-mechanical simulations of elastoplastic deformation and water flow in partially saturated soils. These simulations are used to monitor and assess the safety of geotechnical structures such as earthfill dams, where calibration, uncertainty quantification and scenario analysis require solving the same transient model many times for different parameter values. The displacement and the pore pressure are approximated in a field-split reduced basis obtained by proper orthogonal decomposition, and the Galerkin-projected equations are integrated with decomposed cubature rules, one per balance equation, built with the energy-conserving sampling and weighting (ECSW) method. Each residual is split into an affine part and a nonlinear correction: the affine part is computed exactly, at negligible online cost, so that the cubature rule only needs to approximate the correction, which is localized in space. The construction is independent of the constitutive model choices and is implemented in FEniCSx by assembling the original variational forms on the small set of elements selected by ECSW. The method is tested on two- and three-dimensional dams retaining tailings and water, simulating a raise of the dam and the subsequent consolidation phase, with the friction angle, stiffness and hydraulic conductivity of the dam material and the height of the raise as varying parameters. The hyper-reduced model reproduces the displacement and pressure fields with errors below $0.5\%$ with respect to the finite element solution, achieving speed-ups of up to $43\times$ in two dimensions and $77\times$ in three. These performance gains grow with the extent of the plastic yielding, and the selected elements concentrate in the plastified and unsaturated zones, whose size is set by the physics rather than by the mesh resolution.

cs.CE↗