Searcharxiv⌕ Search

arXiv · 2611.13644

Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference

Abstract

Large language model (LLM) inference during autoregressive decoding is fundamentally memory-bandwidth-bound. Existing three-dimensional (3D) stacked processing-in-memory (PIM) architectures alleviate the off-chip bandwidth wall, yet remain constrained by several limitations: physical layer (PHY), controllers, and direct memory access (DMA) engines compete with arithmetic units for advanced-node base-die area; hybrid-bonding keep-out zones fragment the base-die floorplan and impede physical design; compute tiles built in a dynamic random access memory (DRAM) process are restricted to low logic density, capping achievable throughput; and nonlinear operations offloaded to the host reintroduce a communication bottleneck. We present Tri-Stack-PIM, a heterogeneous three-die architecture that resolves these tensions by dedicating a top DRAM die to storage, a middle buffer die on a mature process node to PHYs, DMA engines, and near-memory compute units, and a bottom base die on an advanced node exclusively to single-instruction-multiple-data (SIMD) multiply-accumulate (MAC) arrays. We further introduce a Unified Buffer-Aware Ready-based (UBAR) hardware out-of-order micro-operation scheduler that enforces cross-die dependency correctness at runtime while maximizing issue-slot utilization through a multi-term priority function, recovering up to 90% of the cycles that an in-order policy would forfeit. A joint architecture-dataflow co-exploration identifies Pareto-optimal configurations that reduce the energy-delay product (EDP) by 33-66x over naive parameter selection. Evaluated across multi-head, grouped-query, and multi-query attention (MHA, GQA, MQA) mechanisms with batch sizes 1-32, Tri-Stack-PIM achieves geometric-mean speedups of 4.95x, 2.57x, and 1.68x across all three attention mechanisms and batch sizes over a graphics processing unit (GPU) baseline, AttAcc, and H2-LLM, respectively.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Shuao Jia, Zichao Ling, Chen Bai, Kang Zhao, Jianwang Zhai. 2026-11-10. Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference. https://searcharxiv.com/abs/2611.13644

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Searcharxiv by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

SPLASH: A Virtualized HBM-HBF Hierarchy with Flash-Aware Sparse Attention for Long-Context Inference

As context lengths, request lifetimes and concurrency grow, the key-value (KV) cache dominates memory usage in large language model (LLM) inference. High-bandwidth memory (HBM), the memory on contemporary GPUs, achieves far higher bandwidth than off-package memory, yet its capacity, bounded by DRAM density, has not kept pace with this demand. High-Bandwidth Flash (HBF), an emerging memory technology, bridges this gap, combining the advanced packaging of HBM with the density of flash to deliver terabyte-scale capacity at HBM-class read bandwidth. Exploiting this capacity for long-context KV caches, however, requires hiding the vastly different physical characteristics of flash from the GPU while keeping decode interactive. We therefore introduce Splash, an architecture that virtualizes HBM and HBF for the KV cache. We architect custom HBM and HBF base dies with novel memory and flash controllers that handle the access semantics and device management of flash. These controllers keep the GPU agnostic of the underlying memory, allowing the HBM-HBF hierarchy to behave as one logical memory for the KV cache. The added capacity of HBF enables long contexts, but dense attention, which reads the entire KV cache for every generated token, cannot keep decode interactive at these lengths. Splash therefore makes sparse attention flash-aware through query-driven address translation, in which the HBF base die resolves each query into the flash addresses of the relevant KV pages and schedules their reads across flash planes. Since the HBF base die holds the location of every page, this translation hides flash from the GPU and balances the selected reads across flash planes, coupling abstraction with performance. Across five models and up to one million tokens, Splash improves per-GPU decode throughput by up to 4.5x over the strongest baseline under a 100 ms latency budget.

cs.AR↗

Accelerating 3D Gaussian Splatting Training through Selective Freezing and Computation Caching

3D Gaussian Splatting (3DGS) becomes a key primitive for immersive 3D experiences. However, its applicability is limited by its long training overhead. Although prior work has shown that gradient accumulation is the dominant bottleneck in training, existing works either have limited speedup or degrade reconstruction quality. To address this issue, we present ElsaGS, an algorithm-hardware co-designed framework that accelerates 3DGS training with negligible accuracy degradation. Our key observation is that most Gaussians converge early, while later iterations only refine a small subset of Gaussians. Thus, we propose a technique, progressive Gaussian freezing, which dynamically freezes well-converged Gaussians and caches their cumulative contributions, thereby reducing computations in both forward rasterization and backward gradient accumulation. To make caching efficient, we further propose an architecture, ElsaGS core, which integrates a pixel-parallel rasterization array with a set-associative frozen Gaussian cache, FGcache. Across three 3DGS datasets, ElsaGS freezes up to 90% of Gaussians with negligible quality loss and achieves up to 20.6x end-to-end speedup and 99.4% energy reduction over GPUs.

cs.AR↗

PVTSizing 2.0: A Fast and Reliable Analog Circuit Sizing Operator for Agentic EDA Workflows

Analog circuit design automation requires both coordinated tool execution and efficient numerical search. Large language models (LLMs) offer new ways to organize tool execution, but finding one sizing that satisfies specifications across process, voltage, and temperature (PVT) corners remains costly. PVTSizing 2.0 addresses these needs through a human-agent workflow built around an independently usable numerical optimizer. An agent carries the designer's approved task through execution and result review. The optimizer reduces unnecessary training through loss-guided updates and uses critic-guided local refinement to explore additional candidates while accounting for cross-corner conflicts. An optional LLM adviser supplies parameter relationships to focus numerical search on circuit-informed directions, while the optimizer selects adjustment amplitudes and verifies their effects through simulation. Across four circuit benchmarks, the standalone optimizer completes all 40 runs and achieves a 7.3x speedup in overall mean runtime over the original PVTSizing, with a comparable mean sample count. In a separate study, the best tested knowledge-injection configuration further reduces mean runtime by 39.9% and simulation samples by 35.4% relative to the standalone optimizer.

cs.AR↗