Searcharxiv⌕ Search

arXiv · 2611.22393

Development and Validation of a preCICE Based OpenMOC OpenFOAM Coupling Framework for Nuclear Reactor Analysis

Abstract

To address the long computation time required by stochastic solvers, which are applied in the coupled neutronics-thermal hydraulics (N-TH) calculations, a faster N-TH coupling framework is developed based on the multiphysics coupling library preCICE, which enables data exchange between OpenMOC and OpenFOAM. As an alternative to commonly used stochastic solvers, like OpenMC, OpenMOC is used as a neutronics solver providing much faster steady-state solution in a Picard iteration. To realize this coupling strategy, OpenMC is used for an initial one-time computation cost for multi-group cross sections data generation that is used throughout OpenMOC calculations. A preCICE library adapter for OpenMOC is also developed, allowing data exchange between neutronic power distributions and thermal hydraulic temperature fields. Our proposed coupling framework is validated through simulations of a simplified 2 times 2 fuel assembly, and a quartered geometry of 17 times 17 fuel assembly. The comparison shows good agreement with established referenced solutions, highlighting our proposed coupling framework for the steady-state N-TH coupling at a fraction of the time required by stochastic solver codes. This advantages could be extended for future applications where fast approximated solutions are required to address the change of N-TH coupling due to small parametric changes like in digital twin of nuclear reactor.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Seth S. W. Choo, L. K. Ang, Zhe Chuan Tan. 2026-11-17. Development and Validation of a preCICE Based OpenMOC OpenFOAM Coupling Framework for Nuclear Reactor Analysis. https://searcharxiv.com/abs/2611.22393

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Searcharxiv by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Terahertz emission from $α$-W/CoFe epitaxial spintronic emitters

We report efficient terahertz (THz) generation in epitaxial $α$-W/Co$_{60}$Fe$_{40}$ spintronic emitters. Two types of emitters have been investigated; epitaxial $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ and $α$-W$(001)$/Co$_{60}$Fe$_{40}(001)$ deposited on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$) and MgO($001$) substrates, respectively. First principle calculations of the electronic band structure at the W$(001)$ surface reveal Dirac-type surface states, similar to that reported previously for the W$(110)$ surface. The generated THz radiation is about $10\%$ larger for $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ grown on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$), which is explained by the fact that the $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ interface for this emitter is more transparent to the spin current due to the presence of Ångstr\" om-scale interface intermixing at the W/CoFe interface. Our results also reveal that the generation of THz radiation is larger when pumping with the laser light from the substrate side, which is explained by a larger part of the laser light due to interference effects in the film stack being absorbed in the ferromagnetic Co$_{60}$Fe$_{40}$ layer in this measurement configuration.

physics.app-ph↗

Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel

As terahertz (THz) frequencies emerge as promising candidates for next-generation wireless networks, accurate characterization of propagation mechanisms in indoor/outdoor environments becomes essential for system design and performance optimization. This article presents an experimental and theoretical investigation of structure-induced indoor surface scattering on THz channels, examining how material properties and structural configurations jointly govern channel power and angular distribution. Six representative indoor surfaces are characterized, revealing that intrinsic structural inhomogeneity - particularly the quasi-periodic earlywood-latewood arrangement in pine wood - induces measurable angular scattering whose dominant lobes and angular shifts are reproduced by a beam-propagation modeling (BPM) framework. Material-covered surface configurations are further investigated, demonstrating that thin dielectric covering layers can substantially modify reflection characteristics through thickness- and frequency- dependent thin-film interference effects. Wide-angle bistatic measurements in a conference room show that folded curtains broaden the measured angular distribution of detectable received power. These findings suggest that structure-induced surface scattering mechanisms may provide scattering-assisted propagation opportunities for indoor non-line-of-sight THz scenarios.

physics.app-ph↗

Thermal and Acoustic Measurements of Hybrid Bonding Stacks

Thermal and structural characterizations of hybrid bonding structures are essential for understanding heat transport in three-dimensional integrated circuits (3D-ICs). In this work, we investigate the effective thermal conductivity of the Cu/dielectric HB layer using time-domain thermoreflectance (TDTR) combined with picosecond ultrasonic technique. Shallow-angle polishing enabled depth-resolved thermal measurements by exposing hybrid bonding layers with different remaining thicknesses, while acoustic echoes were used to identify buried interfaces and determine the thickness. The distinct waveform of the bonding interface echo compared with the Cu/dielectric interface echo suggests that its acoustic response may also reflect the interfacial bonding conditions. The extracted thermal conductivity ranges from 1.14 to 1.75 Wm-1K-1 for the bottom pad layer and from 1.76 to 4.34 Wm-1K-1 for the top pad layer. The difference in thermal conductivity is consistent with the different Cu area fractions of the two layers. Furthermore, the thermal conductivity of the top pad layer increases significantly with the remaining thickness, possibly due to the thermal boundary resistance at the bonding interface, low thermal conductivity of SiCN interlayer, and increased electron scattering in thin Cu structures. Our work demonstrates a practical approach to investigate the thermal properties of buried hybrid bonding layers, providing experimental data for thermal design and modeling of 3D-ICs.

physics.app-ph↗