Fundamental Magnetic Properties and Structural Implications for Nanocrystalline Fe-Ti-N Thin Films

Abstract

The magnetization (M) as a function of temperature (T) from 2 to 300 K and in-plane field (H) up to 1 kOe, room temperature easy and hard direction in-plane field hysteresis loops for fields between -100 and +100 Oe, and 10 GHz ferromagnetic resonance (FMR) profiles have been measured for a series of soft-magnetic nano-crystalline 50 nm thick Fe-Ti-N films made by magnetron sputtering in an in-plane field. The nominal titanium concentration was 3 at. % and the nitrogen concentrations (xN) ranged from zero to 12.7 at. %. The saturation magnetization (Ms) vs. T data and the extracted exchange parameters as a function of xN are consistent with a lattice expansion due to the addition of interstitial nitrogen in the body-centered-cubic (bcc) lattice and a structural transition to body-centered-tetragonal (bct) in the 6-8 at. % nitrogen range. The hysteresis loop and FMR data show a consistent picture of the changes in both the uniaxial and cubic anisotropy as a function of xN. Films with xN > 1.9 at. % show an overall uniaxial anisotropy, with an anisotropy field parameter Hu that increases with xN. The corresponding dispersion averaged uniaxial anisotropy energy density parameter = HuMs/2 is a linear function of xN, with a rate of increase of 950 erg/cm3 per at. % nitrogen. The estimated uniaxial anisotropy energy per nitrogen atom is 30 J/mol, a value consistent with other systems. For xN below 6 at. %, the scaling of coercive force Hc data with the sixth power of the grain size D indicate a grain averaged effective cubic anisotropy energy density parameter that is about an order of magnitude smaller that the nominal K1 values for iron, and give a quantitative vs. D response that matches predictions for exchange coupled random grains with cubic anisotropy.