Searcharxiv⌕ Search

arXiv · physics/9908056

Concept of Powerful Multistage Coaxial Cyclotron for Pulsed and Continuous Beam Production

Abstract

The concept of large-radius multistage coaxial cyclotrons having separated orbits is described, to generate proton beams of 120-2000 MeV energy at tens of GW pulsed and hundreds of MW in continuous beam power operation. Accelerated beam losses must be less than 0.1 W/m for the intercepted average beam power linear density. The concept is inherently configured to actively compensate the longitudinal and transverse space charge expansion in beam bunches. These are based on (1) actively varying the bunch acceleration equilibrium phase while maintaining isochronism, independently for each cyclotron turns; (2) independently changing the acceleration voltage for each turn together with orbit corrections that preserve isochronism; (3) independently changing the transverse betatron oscillation tune shift, to assure non-resonant operation. Also, (4) sextupole lenses are included to compensate for chromaticity effects. Moreover, the concept is based on optimum uses of practical successful results so far achieved in beam acceleration and storage techniques. This accelerator can be used to deliver a pulsed intense source of neutrons without the use of storage rings, and to drive the different transmutation technologies. As an example of such a cyclotron system, we describe our approach of accelerating single-bunch proton beams at up to 1 GeV energy, with pulsed beam power of 80 GW and bunch duration of 2 ns. The exemplar cyclotron accelerator system is configured to be located in the shielded structure of the 6-GeV Yerevan Electron Synchrotron. The cost of such a cyclotron system is estimated to be approximately 40,000,000 US dollars, if implemented in Armenia at substantially reduced labor costs.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A. R. Tumanyan, N. Z. Akopov, Z. G. Guiragossian, Z. N. Akopov. 1999-08-29. Concept of Powerful Multistage Coaxial Cyclotron for Pulsed and Continuous Beam Production. https://arxiv.org/abs/physics/9908056

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Stable, High-Charge, Laser-Driven VHEE Beams for Preclinical Applications

Laser-driven plasma accelerators (LPAs) are promising sources of very-high-energy-electron (VHEE) beams for medical applications, but increasing charge per pulse while maintaining pointing stability remains challenging. We demonstrate laser-accelerated beams with total charge per pulse reaching (559 $\pm$ 56) pC using an 80 TW laser system. The spectra have a dominant component at 40-60 MeV and a high-energy tail extending to approximately 200 MeV. Pointing jitter measured in air at the irradiation target plane reaches as low as 0.7 mrad. The beams were used for VHEE irradiation experiments involving a 10 mm region of interest through a 40 mm depth at 400 $\pm$ 20 mGy/pulse. Spectral reproducibility is quantified over fixed-setting shot sequences. Particle-in-cell simulations produce a peak-and-tail spectrum through acceleration in successive bubbles associated with a strongly modified plasma wake, providing a plausible mechanism for maintaining substantial accelerated charge despite strong beam loading. Dose-weighted time-of-flight calculations indicate an effective pulse dose rate of $10^{12}$ Gy/s and average dose rates of tens of Gy/min. These results establish an LPA operating regime relevant to preclinical VHEE irradiation.

physics.acc-ph↗

Secondary neutron beam production at Jefferson Lab

We investigate secondary neutron production by an 11 GeV electron beam in the Hall A beam dump at Jefferson Lab and their transport to a downstream experimental area. This secondary beam could operate opportunistically with the primary electron-scattering programme. The neutron energy spectrum extends from thermal energies to several GeVs, offering a distinctive opportunity for irradiation at energy grater than 1 GeV. We considered three configurations: the current setup, the planned BDX facility, and an optimized BDX layout with a dedicated neutron extraction pipe. We also studied how radiators made of different materials and placed upstream of the beam dump increase neutron production.

physics.acc-ph↗

Quantum transport of vortex electrons in bending magnets and circular accelerators

Controlling the sizes and phase structure of single-particle wave packets in accelerators remains an experimental challenge and requires understanding how bending magnets transform these states. An important example is transporting relativistic vortex electrons through the magnets to a collision point while keeping a narrow orbital-angular-momentum (OAM) distribution. We derive an effective Hamiltonian that accounts for the packet acceleration, employ it to obtain a generalized BMT-like equation, match the electron state at both magnet boundaries, and calculate the mean OAM and its variance. A half turn can reverse the mean OAM relative to the momentum while broadening its distribution, so recovering the mean does not ensure state recovery. We identify windows in packet sizes and bend angles for a small OAM spread and show that weak bends can produce narrow distributions with the mean OAM tilted relative to the momentum, making these states candidates for spatiotemporal vortices. For a few MeV electrons, we propose to use half-turn magnets that leave the mean OAM nearly antiparallel to the momentum while keeping its distribution narrow. For a circular orbit in a uniform field, the OAM variance after the exit grows as $N^2$ over $N$ turns, favoring linear accelerators, such as LINAC at JINR, for first experiments in MeV range.

physics.acc-ph↗