Searcharxiv⌕ Search

arXiv subjects

Å. Nordlund

Publications and source records attributed to Å. Nordlund.

At least 19 recordsLinked to original sources

From the CMF to the IMF: Beyond the Core-Collapse Model

Observations have indicated that the prestellar core mass function (CMF) is similar to the stellar initial mass function (IMF), except for an offset towards larger masses. This has led to the idea that there is a one-to-one relation between cores and stars, such that the whole stellar mass reservoir is contained in a gravitationally-bound prestellar core, as postulated by the core-collapse model, and assumed in recent theoretical models of the stellar IMF. We test the validity of this assumption by comparing the final mass of stars with the mass of their progenitor cores in a high-resolution star-formation simulation that generates a realistic IMF under physical conditions characteristic of observed molecular clouds. Using a definition of bound cores similar to previous works we obtain a CMF that converges with increasing numerical resolution. We find that the CMF and the IMF are closely related in a statistical sense only; for any individual star there is only a weak correlation between the progenitor core mass and the final stellar mass. In particular, for high mass stars only a small fraction of the final stellar mass comes from the progenitor core, and even for low mass stars the fraction is highly variable, with a median fraction of only about 50%. We conclude that the core-collapse scenario and related models for the origin of the IMF are incomplete. We also show that competitive accretion is not a viable alternative.

astro-ph.SR↗

Pebble dynamics and accretion onto rocky planets. I. Adiabatic and convective models

We present nested-grid, high-resolution hydrodynamic simulations of gas and particle dynamics in the vicinity of Mars- to Earth-mass planetary embryos. The simulations extend from the surface of the embryos to a few vertical disk scale heights, with \rev{a spatial} dynamic range \rev{of} $\sim\! 1.4\times 10^5$. Our results confirm that "pebble"-sized particles are readily accreted, with accretion rates continuing to increase up to metre-size "boulders" for a 10\% MMSN surface density model. The gas mass flux in and out of the Hill sphere is consistent with the Hill rate, $ΣΩR_\mathrm{H}^2 = 4\, 10^{-3}$ M$_\oplus$ yr$^{-1}$. While smaller size particles mainly track the gas, a net accretion rate of $\approx 2\,10^{-5}$ M$_\oplus$ yr$^{-1}$ is reached for 0.3--1 cm particles, even though a significant fraction leaves the Hill sphere again. Effectively all pebble-sized particles that cross the Bondi sphere are accreted. The resolution of these simulations is sufficient to resolve accretion-driven convection. Convection driven by a nominal accretion rate of $10^{-6}$ M$_\oplus$ yr$^{-1}$ does not significantly alter the pebble accretion rate. We find that, due to cancellation effects, accretion rates of pebble-sized particles are nearly independent of disk surface density. As a result, we can estimate accurate growth times for specified particle sizes. For 0.3--1 cm size particles, the growth time from a small seed is $\sim$0.15 million years for an Earth mass planet at 1 AU and $\sim$0.1 million years for a Mars mass planet at 1.5 AU.

astro-ph.EP↗

A simple and efficient solver for self-gravity in the DISPATCH astrophysical simulation framework

We describe a simple and effective algorithm for solving Poisson's equation in the context of self-gravity within the DISPATCH astrophysical fluid framework. The algorithm leverages the fact that DISPATCH stores multiple time slices and uses asynchronous time-stepping to produce a scheme that does not require any explicit global communication or sub-cycling, only the normal, local communication between patches and the iterative solution to Poisson's equation. We demonstrate that the implementation is suitable for both collections of patches of a single resolution and for hierarchies of adaptively resolved patches. Benchmarks are presented that demonstrate the accuracy, effectiveness and efficiency of the scheme.

astro-ph.IM↗

DISPATCH: A Numerical Simulation Framework for the Exa-scale Era. I. Fundamentals

We introduce a high-performance simulation framework that permits the semi-independent, task-based solution of sets of partial differential equations, typically manifesting as updates to a collection of `patches' in space-time. A hybrid MPI/OpenMP execution model is adopted, where work tasks are controlled by a rank-local `dispatcher' which selects, from a set of tasks generally much larger than the number of physical cores (or hardware threads), tasks that are ready for updating. The definition of a task can vary, for example, with some solving the equations of ideal magnetohydrodynamics (MHD), others non-ideal MHD, radiative transfer, or particle motion, and yet others applying particle-in-cell (PIC) methods. Tasks do not have to be grid-based, while tasks that are, may use either Cartesian or orthogonal curvilinear meshes. Patches may be stationary or moving. Mesh refinement can be static or dynamic. A feature of decisive importance for the overall performance of the framework is that time steps are determined and applied locally; this allows potentially large reductions in the total number of updates required in cases when the signal speed varies greatly across the computational domain, and therefore a corresponding reduction in computing time. Another feature is a load balancing algorithm that operates `locally' and aims to simultaneously minimise load and communication imbalance. The framework generally relies on already existing solvers, whose performance is augmented when run under the framework, due to more efficient cache usage, vectorisation, local time-stepping, plus near-linear and, in principle, unlimited OpenMP and MPI scaling.

astro-ph.IM↗

Nonlinear evolution of the magnetized Kelvin-Helmholtz instability: from fluid to kinetic modeling

The nonlinear evolution of collisionless plasmas is typically a multi-scale process where the energy is injected at large, fluid scales and dissipated at small, kinetic scales. Accurately modelling the global evolution requires to take into account the main micro-scale physical processes of interest. This is why comparison of different plasma models is today an imperative task aiming at understanding cross-scale processes in plasmas. We report here the first comparative study of the evolution of a magnetized shear flow, through a variety of different plasma models by using magnetohydrodynamic, Hall-MHD, two-fluid, hybrid kinetic and full kinetic codes. Kinetic relaxation effects are discussed to emphasize the need for kinetic equilibriums to study the dynamics of collisionless plasmas in non trivial configurations. Discrepancies between models are studied both in the linear and in the nonlinear regime of the magnetized Kelvin-Helmholtz instability, to highlight the effects of small scale processes on the nonlinear evolution of collisionless plasmas. We illustrate how the evolution of a magnetized shear flow depends on the relative orientation of the fluid vorticity with respect to the magnetic field direction during the linear evolution when kinetic effects are taken into account. Even if we found that small scale processes differ between the different models, we show that the feedback from small, kinetic scales to large, fluid scales is negligable in the nonlinear regime. This study show that the kinetic modeling validates the use of a fluid approach at large scales, which encourages the development and use of fluid codes to study the nonlinear evolution of magnetized fluid flows, even in the colisionless regime.

physics.space-ph↗

The Stagger-grid: A Grid of 3D Stellar Atmosphere Models - I. Methods and General Properties

We present the Stagger-grid, a comprehensive grid of time-dependent, 3D hydrodynamic model atmospheres for late-type stars with realistic treatment of radiative transfer, covering a wide range in stellar parameters. This grid of 3D models is intended for various applications like stellar spectroscopy, asteroseismology and the study of stellar convection. In this introductory paper, we describe the methods used for the computation of the grid and discuss the general properties of the 3D models as well as their temporal and spatial averages (<3D>). All our models were generated with the Stagger-code, using realistic input physics for the equation of state (EOS) and for continuous and line opacities. Our ~220 grid models range in Teff from 4000 to 7000K in steps of 500K, in log g from 1.5 to 5.0 in steps of 0.5 dex, and [Fe/H] from -4.0 to +0.5 in steps of 0.5 and 1.0 dex. We find a tight scaling relation between the vertical velocity and the surface entropy jump, which itself correlates with the constant entropy value of the adiabatic convection zone. The range in intensity contrast is enhanced at lower metallicity. The granule size correlates closely with the pressure scale height sampled at the depth of maximum velocity. We compare the <3D> models with widely applied 1D models, as well as with theoretical 1D hydrostatic models generated with the same EOS and opacity tables as the 3D models, in order to isolate the effects of using self-consistent and hydrodynamic modeling of convection, rather than the classical mixing length theory approach. For the first time, we are able to quantify systematically over a broad range of stellar parameters the uncertainties of 1D models arising from the simplified treatment of physics, in particular convective energy transport. In agreement with previous findings, we find that the differences can be significant, especially for metal-poor stars.

astro-ph.SR↗

Kinetic modeling of particle acceleration in a solar null point reconnection region

The primary focus of this paper is on the particle acceleration mechanism in solar coronal three-dimensional reconnection null-point regions. Starting from a potential field extrapolation of a Solar and Heliospheric Observatory (SOHO) magnetogram taken on 2002 November 16, we first performed magnetohydrodynamics (MHD) simulations with horizontal motions observed by SOHO applied to the photospheric boundary of the computational box. After a build-up of electric current in the fan-plane of the null-point, a sub-section of the evolved MHD data was used as initial and boundary conditions for a kinetic particle-in-cell model of the plasma. We find that sub-relativistic electron acceleration is mainly driven by a systematic electric field in the current sheet. A non-thermal population of electrons with a power-law distribution in energy forms in the simulated pre-flare phase, featuring a power-law index of about -1.78. This work provides a first step towards bridging the gap between macroscopic scales on the order of hundreds of Mm and kinetic scales on the order of cm in the solar corona, and explains how to achieve such a cross-scale coupling by utilizing either physical modifications or (equivalent) modifications of the constants of nature. With their exceptionally high resolution - up to 135 billion particles and 3.5 billion grid cells of size 17.5 km - these simulations offer a new opportunity to study particle acceleration in solar-like settings.

astro-ph.SR↗

3D Solar Null Point Reconnection MHD Simulations

Numerical MHD simulations of 3D reconnection events in the solar corona have improved enormously over the last few years, not only in resolution, but also in their complexity, enabling more and more realistic modeling. Various ways to obtain the initial magnetic field, different forms of solar atmospheric models as well as diverse driving speeds and patterns have been employed. This study considers differences between simulations with stratified and non-stratified solar atmospheres, addresses the influence of the driving speed on the plasma flow and energetics, and provides quantitative formulas for mapping electric fields and dissipation levels obtained in numerical simulations to the corresponding solar quantities. The simulations start out from a potential magnetic field containing a null-point, obtained from a Solar and Heliospheric Observatory (SOHO) magnetogram extrapolation approximately 8 hours before a C-class flare was observed. The magnetic field is stressed with a boundary motion pattern similar to - although simpler than - horizontal motions observed by SOHO during the period preceding the flare. The general behavior is nearly independent of the driving speed, and is also very similar in stratified and non-stratified models, provided only that the boundary motions are slow enough. The boundary motions cause a build-up of current sheets, mainly in the fan-plane of the magnetic null-point, but do not result in a flare-like energy release. The additional free energy required for the flare could have been partly present in non-potential form in the initial state, with subsequent additions from magnetic flux emergence or from components of the boundary motion that were not represented by the idealized driving pattern.

astro-ph.SR↗

Particle-In-Cell Simulation of Electron Acceleration in Solar Coronal Jets

We investigate electron acceleration resulting from 3D magnetic reconnection between an emerging, twisted magnetic flux rope and a pre-existing weak, open magnetic field. We first follow the rise of an unstable, twisted flux tube with a resistive MHD simulation where the numerical resolution is enhanced by using fixed mesh refinement. As in previous MHD investigations of similar situations, the rise of the flux tube into the pre-existing inclined coronal magnetic field results in the formation of a solar coronal jet. A snapshot of the MHD model is then used as an initial and boundary condition for a particle-in-cell simulation, using up to half a billion cells and over 20 billion charged particles. Particle acceleration occurs mainly in the reconnection current sheet, with accelerated electrons displaying a power law in the energy probability distribution with an index of around -1.5. The main acceleration mechanism is a systematic electric field, striving to maintaining the electric current in the current sheet against losses caused by electrons not being able to stay in the current sheet for more than a few seconds at a time.

astro-ph.SR↗

Solar Fe abundance and magnetic fields - Towards a consistent reference metallicity

We investigate the impact on Fe abundance determination of including magnetic flux in series of 3D radiation-MHD simulations of solar convection which we used to synthesize spectral intensity profiles corresponding to disc centre. A differential approach is used to quantify the changes in theoretical equivalent width of a set of 28 iron spectral lines spanning a wide range in lambda, excitation potential, oscillator strength, Landé factor, and formation height. The lines were computed in LTE using the spectral synthesis code LILIA. We used input magnetoconvection snapshots covering 50 minutes of solar evolution and belonging to series having an average vertical magnetic flux density of 0, 50, 100 and 200 G. For the relevant calculations we used the Copenhagen Stagger code. The presence of magnetic fields causes both a direct (Zeeman-broadening) effect on spectral lines with non-zero Landé factor and an indirect effect on temperature-sensitive lines via a change in the photospheric T-tau stratification. The corresponding correction in the estimated atomic abundance ranges from a few hundredths of a dex up to |Delta log(Fe)| ~ 0.15 dex, depending on the spectral line and on the amount of average magnetic flux within the range of values we considered. The Zeeman-broadening effect gains relatively more importance in the IR. The largest modification to previous solar abundance determinations based on visible spectral lines is instead due to the indirect effect, i.e., the line-weakening caused by a warmer stratification on an optical depth scale. Our results indicate that the average solar iron abundance obtained when using magnetoconvection models can be 0.03-0.11 dex higher than when using the simpler HD convection approach. We demonstrate that accounting for magnetic flux is important in state-of-the-art solar photospheric abundance determinations based on 3D simulations.

astro-ph.SR↗

3D LTE spectral line formation with scattering in red giant stars

We investigate the effects of coherent isotropic continuum scattering on the formation of spectral lines in local thermodynamic equilibrium (LTE) using 3D hydrodynamical and 1D hydrostatic model atmospheres of red giant stars. Continuum flux levels, spectral line profiles and curves of growth for different species are compared with calculations that treat scattering as absorption. Photons may escape from deeper, hotter layers through scattering, resulting in significantly higher continuum flux levels beneath a wavelength of 5000 A. The magnitude of the effect is determined by the importance of scattering opacity with respect to absorption opacity; we observe the largest changes in continuum flux at the shortest wavelengths and lowest metallicities; intergranular lanes of 3D models are more strongly affected than granules. Continuum scattering acts to increase the profile depth of LTE lines: continua gain more brightness than line cores due to their larger thermalization depth in hotter layers. We thus observe the strongest changes in line depth for high-excitation species and ionized species, which contribute significantly to photon thermalization through their absorption opacity near the continuum optical surface. Scattering desaturates the line profiles, leading to larger abundance corrections for stronger lines, which reach -0.5 dex at 3000 A for Fe II lines in 3D with excitation potential 2 eV at [Fe/H]=-3.0. The corrections are less severe for low-excitation lines, longer wavelengths, and higher metallicity. Velocity fields increase the effects of scattering by separating emission from granules and intergranular lanes in wavelength. 1D calculations exhibit similar scattering abundance corrections for weak lines, but those for strong lines are generally smaller compared to 3D models and depend on the choice of microturbulence.

astro-ph.SR↗

Three-dimensional surface convection simulations of metal-poor stars -- The effect of scattering on the photospheric temperature stratification

Three-dimensional (3D) radiative hydrodynamic model atmospheres of metal-poor late-type stars are characterized by cooler upper photospheric layers than their 1D counterparts. This property of 3D models can dramatically affect elemental abundances derived from temperature-sensitive spectral lines. We investigate whether the cool surface temperatures predicted by metal-poor 3D models can be ascribed to the approximated treatment of scattering in the radiative transfer. We use the Bifrost code to test three different ways to handle scattering in 3D model atmospheres of metal-poor stars. First, we solve self-consistently the radiative transfer equation for a source function with a coherent scattering term. Second, we solve the radiative transfer equation for a Planckian source function, neglecting the contribution of continuum scattering to extinction in the optically thin layers; this has been the default mode in previous models of ours. Third, we treat scattering as pure absorption everywhere, which is the standard case in CO5BOLD models. We find that the second approach produces temperature structures with cool upper photospheric layers very similar to the correct coherent scattering solution. In contrast, treating scattering as pure absorption leads to significantly hotter and shallower temperature stratifications. The main differences in temperature structure between our published models and those generated with the CO5BOLD code can be traced to the different treatments of scattering. Neglecting the contribution of continuum scattering to extinction in optically thin layers provides a good approximation to the full radiative transfer solution for metal-poor stars. Our results demonstrate that the cool temperature stratifications predicted for metal-poor late-type stellar atmospheres by previous models of ours are not an artifact of the approximated treatment of scattering.

astro-ph.SR↗

Solar abundance corrections derived through 3D magnetoconvection simulations

We explore the effect of the magnetic field when using realistic three-dimensional convection experiments to determine solar element abundances. By carrying out magnetoconvection simulations with a radiation-hydro code (the Copenhagen stagger code) and through a-posteriori spectral synthesis of three Fe I lines, we obtain evidence that moderate amounts of mean magnetic flux cause a noticeable change in the derived equivalent widths compared with those for a non-magnetic case. The corresponding Fe abundance correction for a mean flux density of 200 G reaches up to ~0.1 dex in magnitude. These results are based on space- and time-averaged line profiles over a time span of 2.5 solar hours in the statistically stationary regime of the convection. The main factors causing the change in equivalent widths, namely the Zeeman broadening and the modification of the temperature stratification, act in different amounts and, for the iron lines considered here, in opposite directions; yet, the resulting $|Δ\logε_{\odot}(Fe)|$ coincides within a factor two in all of them, even though the sign of the total abundance correction is different for the visible and infrared lines. We conclude that magnetic effects should be taken into account when discussing precise values of the solar and stellar abundances and that an extended study is warranted.

astro-ph.SR↗

Solar Flux Emergence Simulations

We simulate the rise through the upper convection zone and emergence through the solar surface of initially uniform, untwisted, horizontal magnetic flux with the same entropy as the non-magnetic plasma that is advected into a domain 48 Mm wide from from 20 Mm deep. The magnetic field is advected upward by the diverging upflows and pulled down in the downdrafts, which produces a hierarchy of loop like structures of increasingly smaller scale as the surface is approached. There are significant differences between the behavior of fields of 10 kG and 20 or 40 kG strength at 20 Mm depth. The 10 kG fields have little effect on the convective flows and show little magnetic buoyancy effects, reaching the surface in the typical fluid rise time from 20 Mm depth of 32 hours. 20 and 40 kG fields significantly modify the convective flows, leading to long thin cells of ascending fluid aligned with the magnetic field and their magnetic buoyancy makes them rise to the surface faster than the fluid rise time. The 20 kG field produces a large scale magnetic loop that as it emerges through the surface leads to the formation of a bipolar pore-like structure.

astro-ph.SR↗

Coupling from the photosphere to the chromosphere and the corona

The atmosphere of the Sun is characterized by a complex interplay of competing physical processes: convection, radiation, conduction, and magnetic fields. The most obvious imprint of the solar convection and its overshooting in the low atmosphere is the granulation pattern. Beside this dominating scale there is a more or less smooth distribution of spatial scales, both towards smaller and larger scales, making the Sun essentially a multi-scale object. Convection and overshooting give the photosphere its face but also act as drivers for the layers above, namely the chromosphere and corona. The magnetic field configuration effectively couples the atmospheric layers on a multitude of spatial scales, for instance in the form of loops that are anchored in the convection zone and continue through the atmosphere up into the chromosphere and corona. The magnetic field is also an important structuring agent for the small, granulation-size scales, although (hydrodynamic) shock waves also play an important role -- especially in the internetwork atmosphere where mostly weak fields prevail. Based on recent results from observations and numerical simulations, we attempt to present a comprehensive picture of the atmosphere of the quiet Sun as a highly intermittent and dynamic system.

astro-ph↗

Helioseismic Holography of Simulated Solar Convection and Prospects for the Detection of Small-Scale Subsurface Flows

We perform helioseismic holography on realistic solar convection simulations and compare the observed travel-time perturbations with the expected travel times from the horizontal flows in the simulations computed from forward models under the assumption of the Born approximation. We demonstrate reasonable agreement between the observed and model travel times which reinforces the validity of helioseismic holography in the detection of subsurface horizontal flows. From the variation of the signal-to-noise ratio with depth, we conclude that the helioseismic detection of individual flow structures with spatial scales of supergranulation or smaller is not possible for depths below about 5 Mm below the surface over time scales less than a day. Approximately half of the observed signal originates within the first 2 Mm below the surface. A consequence of this is a rapid decrease (and reversal in some cases) of the travel-time perturbations with depth due to the contribution to the measurements of oppositely directed surface flows in neighboring convective cells. This confirms an earlier interpretation of similar effects reported from observations.

astro-ph↗

In-situ Particle Acceleration in Collisionless Shocks

The outflows from gamma ray bursts, active galactic nuclei and relativistic jets in general interact with the surrounding media through collisionless shocks. With three dimensional relativistic particle-in-cell simulations we investigate such shocks. The results from these experiments show that small--scale magnetic filaments with strengths of up to percents of equipartition are generated and that electrons are accelerated to power law distributions N(E)~E^{-p} in the vicinity of the filaments through a new acceleration mechanism. The acceleration is locally confined, instantaneous and differs from recursive acceleration processes such as Fermi acceleration. We find that the proposed acceleration mechanism competes with thermalization and becomes important at high Lorentz factors.

astro-ph↗

Non-Fermi Power law Acceleration in Astrophysical Plasma Shocks

Collisionless plasma shock theory, which applies for example to the afterglow of gamma ray bursts, still contains key issues that are poorly understood. In this paper we study charged particle dynamics in a highly relativistic collisionless shock numerically using ~10^9 particles. We find a power law distribution of accelerated electrons, which upon detailed investigation turns out to originate from an acceleration mechanism that is decidedly different from Fermi acceleration. Electrons are accelerated by strong filamentation instabilities in the shocked interpenetrating plasmas and coincide spatially with the power law distributed current filamentary structures. These structures are an inevitable consequence of the now well established Weibel-like two-stream instability that operates in relativistic collisionless shocks. The electrons are accelerated and decelerated instantaneously and locally; a scenery that differs qualitatively from recursive acceleration mechanisms such as Fermi acceleration. The slopes of the electron distribution power laws are in concordance with the particle power law spectra inferred from observed afterglow synchrotron radiation in gamma ray bursts, and the mechanism can possibly explain more generally the origin of non-thermal radiation from shocked inter- and circum-stellar regions and from relativistic jets.

astro-ph↗