arXiv subjects

Özgecan Özdogan

Publications and source records attributed to Özgecan Özdogan.

10 recordsLinked to original sources

arXiv2024

Intelligent Reflecting Surface vs. Decode-and-Forward: How Large Surfaces Are Needed to Beat Relaying?

The rate and energy efficiency of wireless channels can be improved by deploying software-controlled metasurfaces to reflect signals from the source to the destination, especially when the direct path is weak. While previous works mainly optimized the reflections, this letter compares the new technology with classic decode-and-forward (DF) relaying. The main observation is that very high rates and/or large metasurfaces are needed to outperform DF relaying, both in terms of minimizing the total transmit power and maximizing the energy efficiency, which also includes the dissipation in the transceiver hardware.

cs.IT↗

arXiv2022

Massive MIMO with Dual-Polarized Antennas

This paper considers a single-cell massive MIMO (multiple-input multiple-output) system with dual-polarized antennas at both the base station and users. We study a channel model that includes the key practical aspects that arise when utilizing dual-polarization: channel cross-polar discrimination (XPD) and cross-polar correlations (XPC) at the transmitter and receiver. We derive the achievable uplink and downlink spectral efficiencies (SE) with and without successive interference cancellation (SIC) when using the linear minimum mean squared error (MMSE), zero-forcing (ZF), and maximum ratio (MR) combining/precoding schemes. The expressions depend on the statistical properties of the MMSE channel estimator obtained for the dual-polarized channel model. Closed-form uplink and downlink SE expressions for MR combining/precoding are derived. Using these expressions, we propose power-control algorithms that maximize the uplink and downlink sum SEs under uncorrelated fading but can be used to enhance performance also with correlated fading. We compare the SEs achieved in dual-polarized and uni-polarized setups numerically and evaluate the impact of XPD and XPC conditions. The simulations reveal that dual-polarized setups achieve 40-60\% higher SEs and the gains remain also under severe XPD and XPC. Dual-polarized also systems benefit more from advanced signal processing that compensates for imperfections.

cs.IT↗

arXiv2022

Downlink Spectral Efficiency of Massive MIMO with Dual-Polarized Antennas

This paper considers the downlink of a single-cell massive MIMO (multiple-input multiple-output) system with dual-polarized antennas at both the base station and users. We consider a channel model that takes into account several practical aspects that arise when utilizing dual polarization, such as channel cross-polar discrimination (XPD) and cross-polar receive and transmit correlations (XPC). We derive the statistical properties of the minimum mean squared error (MMSE) channel estimator for this model. Using these estimates for maximum ratio precoding, a rigorous closed-form downlink spectral efficiency (SE) expression is derived. We compare the SEs achieved in dual-polarized and uni-polarized setups numerically and evaluate the impact of XPD on the downlink SE.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surfaces: Three Myths and Two Critical Questions

The search for physical-layer technologies that can play a key role in beyond-5G systems has started. One option is reconfigurable intelligent surfaces (RIS), which can collect wireless signals from a transmitter and passively beamform them towards the receiver. The technology has exciting prospects and is quickly gaining traction in the communication community, but in the current hype we have witnessed how several myths and overstatements are spreading in the literature. In this article, we take a neutral look at the RIS technology. We first review the fundamentals and then explain specific features that can be easily misinterpreted. In particular, we debunk three myths: 1) Current network technology can only control the transmitter and receiver, not the environment in between; 2) A better asymptotic array gain is achieved than with conventional beamforming; 3) The pathloss is the same as with anomalous mirrors. To inspire further research, we conclude by identifying two critical questions that must be answered for RIS to become a successful technology: 1) What is a convincing use case for RIS?; 2) How can we estimate channels and control an RIS in real time?

cs.IT↗

arXiv2020

Deep Learning-based Phase Reconfiguration for Intelligent Reflecting Surfaces

Intelligent reflecting surfaces (IRSs), consisting of reconfigurable metamaterials, have recently attracted attention as a promising cost-effective technology that can bring new features to wireless communications. These surfaces can be used to partially control the propagation environment and can potentially provide a power gain that is proportional to the square of the number of IRS elements when configured in a proper way. However, the configuration of the local phase matrix at the IRSs can be quite a challenging task since they are purposely designed to not have any active components, therefore, they are not able to process any pilot signal. In addition, a large number of elements at the IRS may create a huge training overhead. In this paper, we present a deep learning (DL) approach for phase reconfiguration at an IRS in order to learn and make use of the local propagation environment. The proposed method uses the received pilot signals reflected through the IRS to train the deep feedforward network. The performance of the proposed approach is evaluated and the numerical results are presented.

eess.SP↗

arXiv2020

Using Intelligent Reflecting Surfaces for Rank Improvement in MIMO Communications

An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a larger impact on the channel capacity: rank improvement. One of the classical bottlenecks of point-to-point MIMO communications is that the capacity gains provided by spatial multiplexing are only large at high SNR, and high SNR channels are mainly appearing in line-of-sight (LoS) scenarios where the channel matrix has low rank and therefore does not support spatial multiplexing. We demonstrate how an IRS can be used and optimized in such scenarios to increase the rank of the channel matrix, leading to substantial capacity gains.

eess.SP↗

arXiv2019

Intelligent Reflecting Surfaces: Physics, Propagation, and Pathloss Modeling

Intelligent reflecting surfaces can improve the communication between a source and a destination. The surface contains metamaterial that is configured to "reflect" the incident wave from the source towards the destination. Two incompatible pathloss models have been used in prior work. In this letter, we derive the far-field pathloss using physical optics techniques and explain why the surface consists of many elements that individually act as diffuse scatterers but can jointly beamform the signal in a desired direction with a certain beamwidth. We disprove one of the previously conjectured pathloss models.

physics.app-ph↗

arXiv2019

Performance of Cell-Free Massive MIMO with Rician Fading and Phase Shifts

In this paper, we study the uplink (UL) and downlink (DL) spectral efficiency (SE) of a cell-free massive multiple-input-multiple-output (MIMO) system with Rician fading channels. The phase of the line-of-sight (LoS) path is modeled as a uniformly distributed random variable to take the phase-shifts due to mobility and phase noise into account. Considering the availability of prior information at the access points (APs), the phase-aware minimum mean square error (MMSE), non-aware linear MMSE (LMMSE), and least-square (LS) estimators are derived. The MMSE estimator requires perfectly estimated phase knowledge whereas the LMMSE and LS are derived without it. In the UL, a two-layer decoding method is investigated in order to mitigate both coherent and non-coherent interference. Closed-form UL SE expressions with phase-aware MMSE, LMMSE, and LS estimators are derived for maximum-ratio (MR) combining in the first layer and optimal large-scale fading decoding (LSFD) in the second layer. In the DL, two different transmission modes are studied: coherent and non-coherent. Closed-form DL SE expressions for both transmission modes with MR precoding are derived for the three estimators. Numerical results show that the LSFD improves the UL SE performance and coherent transmission mode performs much better than non-coherent transmission in the DL. Besides, the performance loss due to the lack of phase information depends on the pilot length and it is small when the pilot contamination is low.

cs.IT↗

arXiv2019

Massive MIMO with Spatially Correlated Rician Fading Channels

This paper considers multi-cell Massive MIMO (multiple-input multiple-output) systems where the channels are spatially correlated Rician fading. The channel model is composed of a deterministic line-of-sight (LoS) path and a stochastic non-line-of-sight (NLoS) component describing a practical spatially correlated multipath environment. We derive the statistical properties of the minimum mean squared error (MMSE), element-wise MMSE (EW-MMSE), and least-square (LS) channel estimates for this model. Using these estimates for maximum ratio (MR) combining and precoding, rigorous closed-form uplink (UL) and downlink (DL) spectral efficiency (SE) expressions are derived and analyzed. The asymptotic SE behavior when using the different channel estimators are also analyzed. Numerical results show that the SE is higher when using the MMSE estimator than the other estimators, and the performance gap increases with the number of antennas.

cs.IT↗

arXiv2018

Uplink Spectral Efficiency of Massive MIMO with Spatially Correlated Rician Fading

This paper considers the uplink (UL) of a multi-cell Massive MIMO (multiple-input multiple-output) system with spatially correlated Rician fading channels. The channel model is composed of a deterministic line-of-sight (LoS) path and a stochastic non-line-of-sight (NLoS) component describing a spatially correlated multipath environment. We derive the statistical properties of the minimum mean squared error (MMSE) and least-square (LS) channel estimates for this model. Using these estimates for maximum ratio (MR) combining, rigorous closed-form UL spectral efficiency (SE) expressions are derived. Numerical results show that the SE is higher when using the MMSE estimator than the LS estimator, and the performance gap increases with the number of antennas. Moreover, Rician fading provides higher achievable SEs than Rayleigh fading since the LoS path improves the sum SE.

cs.IT↗