arXiv subjects

Ülle-Linda Talts

Publications and source records attributed to Ülle-Linda Talts.

6 recordsLinked to original sources

arXiv2026

Electro-Optic Modulation in Polycrystalline Barium Titanate Metasurfaces Enhanced by Poling

Electrically tunable metasurfaces leveraging the strong Pockel's effect in barium titanate (BaTiO$_3$ or BTO) are a promising platform for reconfigurable free-space optical devices. However, the high cost, limited scalability, and restricted substrate compatibility of epitaxial BTO films hinder its exploitation. Here, we demonstrate free-space optical modulators based on imprinted BTO metasurfaces with targeted designs for optical and electric field confinement within the active material. With resonances exhibiting high quality factors of up to 200, we demonstrate improved transmission modulation at sub-volt driving amplitudes and frequencies up to 5 MHz. Additional enhancement is achieved via ferroelectric domain alignment, resulting in up to 25 % higher modulation strength compared to the unbiased case and up to 75 % compared to previous demonstrations. This enhanced EO response, arising from the effective permittivity engineering and domain orientation in these polycrystalline metasurfaces, holds significant potential for scalable and efficient EO modulators and active metasurfaces.

physics.optics↗

arXiv2026

Solution-derived barium titanate waveguides for integrated electro-optic modulation

Metal oxides with strong nonlinear optical properties and wide transparency window are key materials for the development of compact and efficient photonic integrated circuits used for electro-optic modulators and entangled photon sources. Among them, barium titanate (BaTiO$_{3}$) is particularly attractive due to its large Pockels coefficient. However, its use has been limited by challenges in material synthesis and in nanopatterning, owing to its chemical stability and inertness. Here, we demonstrate a monolithic electro-optic modulator entirely based on solution-deposited BaTiO$_{3}$, fabricated through a bottom-up soft nanoimprinting lithography process. Fine-tuning the synthesis and nanofabrication enhances the optical properties of the polycrystalline material. By optimizing the process parameters, we achieve a reduction in propagation losses of two orders of magnitude, enabling efficient electro-optic modulation. This scalable, etch-free approach enables direct patterning of high-quality BaTiO$_{3}$ structures, establishing a new route for low-cost, large-scale integrated electro-optic devices entirely based on oxide material compatible with a wide range of substrates.

physics.optics↗

arXiv2024

Scalable Lithium Niobate Nanoimprinting for Nonlinear Metalenses

Miniaturizing nonlinear optical components is essential for integrating advanced light manipulation into compact photonic devices, enabling scalable and cost-effective applications. While monocrystalline lithium niobate thin films advance nonlinear nanophotonics, their high inertness limits the design of top-down fabricated nanostructures. Here we present a versatile bottom-up fabrication method based on nanoimprint lithography for achieving polycrystalline lithium niobate nanostructures, and demonstrate its significant potential for nonlinear metasurfaces. The fabrication enables nearly vertical features and aspect ratios of up to 6, which we combine with a novel solution-derived material with high effective second-order nonlinearity of d_{eff}=5 pm/V. On this platform, we demonstrate second-harmonic focusing over a broad spectral range from near-UV to near-IR, increasing the nonlinear signal intensity by up to 34 times. Our method enables the first lithium niobate metalens and expands the field of nonlinear metasurfaces by providing a low-cost, highly scalable fabrication method for engineered nonlinear nanostructures

physics.optics↗

arXiv2024

Polarization-entangled photon pair generation from an epsilon-near-zero metasurface

Polarization-entangled photon pair sources are essential for diverse quantum technologies, such as quantum communication, computation, and imaging. However, the generation of complex polarization-entangled quantum states has long been constrained by the available nonlinear susceptibility tensor of natural nonlinear crystals, necessitating a cumbersome and intricate setup for additional coherent superposition or post-selection. In this study, we introduce and experimentally demonstrate a nanoscale polarization-entangled photon pair source utilizing an artificially-engineered metamaterial platform. This platform is based on a plasmonic metasurface that is strongly coupled to an epsilon-near-zero (ENZ) material. By precisely engineering resonances at both pump and signal/idler wavelengths, and leveraging the field enhancement provided by the ENZ effect, the photon pair generation efficiency of the 68-nm-thick metasurface is significantly boosted. More notably, the ENZ metasurface platform facilitates versatile manipulation of the system's anisotropic second-order nonlinear susceptibility tensor, enabling direct control over the polarization states of the photon pairs, which leads to the generation of a polarization-entangled Bell state without the need for additional components. Our approach opens a new avenue for the simultaneous photon pair generation and quantum state engineering in a compact platform.

physics.optics↗

arXiv2023

Large-Scale Bottom-Up Fabricated 3D Nonlinear Photonic Crystals

Nonlinear optical effects are used to generate coherent light at wavelengths difficult to reach with lasers. Materials periodically poled or nanostructured in the nonlinear susceptibility in three spatial directions are called 3D nonlinear photonic crystals (NPhCs). They enable enhanced nonlinear optical conversion efficiencies, emission control, and simultaneous generation of nonlinear wavelengths. The chemical inertness of efficient second-order nonlinear materials ($χ^{(2)}$) prohibited their nanofabrication until 2018. The current method is restricted to top-down laser-based techniques limiting the periodicity along z-axis to 10 um. We demonstrate the first bottom-up fabricated 3D NPhC in sol-gel derived barium titanate by soft-nanoimprint lithography: a woodpile with eight layers and periodicities of 1 um (xy-plane) and 300 nm (z-plane). The surface areas exceed $5.3\cdot 10^4$ um^2, which is two orders of magnitude larger than the state-of-the-art. This study is expected to initiate bottom-up fabrication of 3D NPhCs with a supremely strong and versatile nonlinear response.

physics.optics↗

arXiv2023

Sol-gel Barium Titanate Nanohole Array as a Nonlinear Metasurface and a Photonic Crystal

The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows optical properties of a 2D photonic crystal and metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct soft nanoimprint lithography with sol-gel derived barium titanate enabling critical dimensions of 120 nm with aspect ratios of 5. The nanohole array exhibits a photonic bandgap in the infrared range when probed along the slab axis while lattice resonant states are observed in out-of-plane transmission configuration. The enhanced light-matter interaction from the resonant structure enables to increase the second-harmonic generation in the near-UV by a factor of 18 illustrating the potential in the flexible fabrication technique for barium titanate photonic devices.

physics.optics↗