arXiv subjects

A J Eldorado Riggs

Publications and source records attributed to A J Eldorado Riggs.

At least 19 recordsLinked to original sources

arXiv2026

The Roman Coronagraph Community Participation Program: data reduction pipeline design and implementation

The Roman Space Telescope Coronagraph Instrument will demonstrate a series of technologies and techniques to enable the direct detection of reflected-light planets with space-based observatories. To characterize and validate the performance of the Coronagraph Instrument, the Community Participation Program is developing corgidrp, an open-source Python-based data reduction pipeline. The pipeline can process data from the required and best-effort observing modes and their associated calibration sequences into calibrated science-ready data products. We present the software design and implementation of corgidrp and the motivation behind specific design decisions. We describe the software architecture, data flow, processing steps, automation tools, testing framework, and development philosophy. We also outline future development plans in preparation for on-sky data.

astro-ph.IM↗

arXiv2025

Roman coronagraph simulations of exozodi observations in the presence of wavefront errors

The Coronagraph Instrument on board of the Nancy Grace Roman Space Telescope will demonstrate key technologies that will prepare the ground for the Habitable Worlds Observatory. The current predictions for the Roman Coronagraph's detection limit range from 1e-8 to a few 1e-9, which would allow for groundbreaking science, such as potentially imaging Jupiter-like planets. However, the performance of the instrument depends on many factors. Simulating images with varying optical error sources can help us connect instrument and observatory performance to science yield. Here we present corosims, a tool to simulate observations of astrophysical scenes with the Coronagraph with evolving errors. This tool wraps around the Coronagraph PROPER diffraction model and detector simulator. We use it to investigate the potential degeneracy between jitter-induced speckles and both hot and warm exozodi disk structures. First, we simulate observations of exozodi around Tau Ceti, with varying jitter. We predict that with nominal post-correction pointing jitter performance (~0.3 mas RMS), the Roman Coronagraph should be sensitive to 12x zodis worth of dust, assuming a face-on (worst case scenario) inclination. We further predict that its sensitivity degrades to 35x zodis if jitter on-target is 3x worse than the nominal value. This estimate assumes the best-modeled wavefront control and stability values from the project, including additional model uncertainty factors. We find that, while jitter hinders warm exozodi detection, jitter residuals are unlikely to result in a false positive. However, if a faint hot exozodi falls at small separation, it may not be distinguishable from jitter-induced speckle residuals of comparable brightness. Finally, we discuss the degeneracies induced between flux and separation retrieved near the inner working angle due the sharp edge of the Roman Coronagraph's focal plane mask.

astro-ph.EP↗

arXiv2025

Polarization aberration modeling of internal occulters for coronagraphs

The Habitable Worlds Observatory (HWO) is a flagship mission concept proposing to characterize earth-like exoplanets at high contrast with a coronagraph instrument. The most in-depth, validated contrast error budgets made to date have been at the $10^{-9}$ planet-to-star contrast levels for the Roman Space Telescope. To obtain the raw contrast levels of $\leq 10^{-10}$ contrast needed for HWO, more modeling is needed of the vector diffraction effects within a coronagraph instrument. Several coronagraph architectures are based on the Lyot coronagraph, which utilizes a small occulting spot to block most of the on-axis starlight at a focal plane. In this paper, we present a study of the polarization aberrations generated by internal occulting spots. First, we use finite-difference time-domain (FDTD) modeling to produce the complex transmission of the occulter in each polarization state, and then we separately run those through a closed-loop wavefront control model in FALCO\cite{rigss2018falco} to determine the degradation in achievable contrast. We perform sweeps of such parameters as spot diameter, spot thickness, and angle of incidence to inform the HWO instrument design.

astro-ph.IM↗

arXiv2025

High-order wavefront sensing and control for the Roman Coronagraph Instrument (CGI): architecture and measured performance

The Nancy Grace Roman Space Telescope (``Roman'') is a 2.4m space telescope scheduled for a 2026 launch. The Coronagraph Instrument (CGI) on Roman is a technology-demonstration instrument with a coronagraph and, for the first time in space, deformable mirrors and active wavefront control. This paper walks through the algorithmic and system-level architecture of the HOWFSC implementation for CGI, including the use of ground-in-the-loop (GITL) operations to support computationally-expensive operations, and reports on instrument performance measured during thermal vacuum testing in instrument integration and test. CGI achieved better than $5\times10^{-8}$ total raw contrast with two independent coronagraph architectures covering 3-9 and 6-20 $λ/D$ between them and a $360^{\circ}$ dark hole on each. The contrast limits appear to be driven by time available for testing, and do not appear to represent a floor in the achievable performance of CGI in flight.

astro-ph.IM↗

arXiv2024

Revisiting the Borde-Traub focal plane wavefront estimation technique for exoplanet direct imaging

Direct imaging of exoplanets relies on complex wavefront sensing and control architectures. In addition to fast adaptive optics systems, most of the future high-contrast imaging instruments will soon be equipped with focal plane wavefront sensing algorithms. These techniques use the science detector to estimate the static and quasi-static aberrations induced by optical manufacturing defects and system thermal variations. Pair-wise probing (PWP) has been the most widely used, especially for space-based application and will be tested at contrast levels of ~1e-9 on-sky along with the future coronagraph instrument onboarding the Roman Space Telescope. This algorithm leans on phase diversities applied on the deformable mirror that are recorded in pairs. A minimum of two pairs of probes are required per bandwidth. An additional unprobed image is also recorded to verify the convergence rate of the correction. Before PWP, Borde & Traub proposed a similar algorithm that takes advantage of the unprobed image in the estimation process to get rid of the pair diversity requirement. In this work, we theoretically show that this latter technique should be more efficient than PWP when the convergence time is not limited by photon noise. We then present its performance and practical limitations on coronagraphic testbeds at JPL and exhibit a first on-sky control of non-common path aberrations with such method on VLT/SPHERE.

astro-ph.IM↗

arXiv2024

Benefits of adding radial phase dimples on scalar coronagraph phase masks

Current scalar coronagraph focal plane mask designs are performance-limited by chromaticity. We investigate the effects of adding central Roddier and dual zone phase dimples to scalar vortex masks to improve broadband performance by suppressing the chromatic stellar leakage. We present hybrid designs with radial phase dimples integrated with the sawtooth vortex, wrapped vortex, and cosine phase mask. We show that using these dimples, it is possible to substantially improve the broadband contrast performance of scalar phase masks. We also show that although adding a phase dimple does not increase the sensitivity to low-order aberrations, suppressing the central leakage of scalar vortex coronagraphs does not restore the aberrations sensitivities to their notional state.

astro-ph.IM↗

arXiv2024

Implicit Electric Field Conjugation Through a Single-mode Fiber

Connecting a coronagraph instrument to a spectrograph via a single-mode optical fiber is a promising technique for characterizing the atmospheres of exoplanets with ground and space-based telescopes. However, due to the small separation and extreme flux ratio between planets and their host stars, instrument sensitivity will be limited by residual starlight leaking into the fiber. To minimize stellar leakage, we must control the electric field at the fiber input. Implicit electric field conjugation (iEFC) is a model-independent wavefront control technique in contrast with classical electric field conjugation (EFC) which requires a detailed optical model of the system. We present here the concept of an iEFC-based wavefront control algorithm to improve stellar rejection through a single-mode fiber. As opposed to image-based iEFC which relies on minimizing intensity in a dark hole region, our approach aims to minimize the amount of residual starlight coupling into a single-mode fiber. We present broadband simulation results demonstrating a normalized intensity greater than 10^{-10} for both fiber-based EFC and iEFC. We find that both control algorithms exhibit similar performance for the low wavefront error (WFE) case, however, iEFC outperforms EFC by approximately 100x in the high WFE regime. Having no need for an optical model, this fiber-based approach offers a promising alternative to EFC for ground and space-based telescope missions, particularly in the presence of residual WFE.

astro-ph.IM↗

arXiv2023

Experimental demonstration of spectral linear dark field control at NASA's high contrast imaging testbeds

Due to the low flux of exoEarths, long exposure times are required to spectrally characterize them. During these long exposures, the contrast in the dark hole will degrade as the the optical system drifts from its initial DH state. To prevent such contrast drift, a wavefront sensing and control (WFSC) algorithm running in parallel to the science acquisition can stabilize the contrast. However, pairwise probing (PWP) cannot be reused to efficiently stabilize the contrast since it relies on strong temporal modulation of the intensity in the image plane, which would interrupt the science acquisition. The use of small amplitude probes has been demonstrated but requires multiple measurements from each science sub-band to converge. Conversely, spectral linear dark field control (LDFC) takes advantage of the linear relationship between the change in intensity of the post-coronagraph out-of-band image and small changes in wavefront in the science band to preserve the DH region during science exposures. In this paper, we show experimental results that demonstrate spectral LDFC stabilizes the contrast to levels of a few $10^{-9}$ on a Lyot coronagraph testbed which is housed in a vacuum chamber. Promising results show that spectral LDFC is able to correct for disturbances that degrade the contrast by more than 100$\times$. To our knowledge, this is the first experimental demonstration of spectral LDFC and the first demonstration of spatial or spectral LDFC on a vacuum coronagraph testbed and at contrast levels less than $10^{-8}$.

astro-ph.IM↗

arXiv2023

Dual Purpose Lyot Coronagraph Masks for Simultaneous High-Contrast Imaging and High-Resolution Wavefront Sensing

Directly imaging Earth-sized exoplanets with a visible-light coronagraph instrument on a space telescope will require a system that can achieve $\sim10^{-10}$ raw contrast and maintain it for the duration of observations (on the order of hours or more). We are designing, manufacturing, and testing Dual Purpose Lyot coronagraph (DPLC) masks that allow for simultaneous wavefront sensing and control using out-of-band light to maintain high contrast in the science focal plane. Our initial design uses a tiered metallic focal plane occulter to suppress starlight in the transmitted coronagraph channel and a dichroic-coated substrate to reflect out-of-band light to a wavefront sensing camera. The occulter design introduces a phase shift such that the reflected channel is a Zernike wavefront sensor. The dichroic coating allows higher-order wavefront errors to be detected which is especially critical for compensating for residual drifts from an actively-controlled segmented primary mirror. A second-generation design concept includes a metasurface to create polarization-dependent phase shifts in the reflected beam, which has several advantages including an extended dynamic range. We will present the focal plane mask designs, characterization, and initial testing at NASA's High Contrast Imaging Testbed (HCIT) facility.

astro-ph.IM↗

arXiv2023

Random Vibration Testing of Microelectromechanical Deformable Mirrors for Space-based High-Contrast Imaging

Space-based stellar coronagraph instruments aim to directly image exoplanets that are a fraction of an arcsecond separation and ten billion times fainter than their host star. To achieve this, one or more deformable mirrors (DMs) are used in concert with coronagraph masks to control the wavefront and minimize diffracted starlight in a region of the image known as the ``dark zone" or ``dark hole." The DMs must have a high number of actuators (50 to 96 across) to allow dark holes that are large enough to image a range of desired exoplanet separations. In addition, the surfaces of the DMs must be controlled at the picometer level to enable the required contrast. Any defect in the mechanical structure of the DMs or electronic system could significantly impact the scientific potential of the mission. Thus, NASA's Exoplanet Exploration Program (ExEP) procured two 50$\times$50 microelectromechanical (MEMS) DMs manufactured by Boston Micromachines Corporation (BMC) to test their robustness to the vibrational environment that the DMs will be exposed to during launch. The DMs were subjected to a battery of functional and high-contrast imaging tests before and after exposure to flight-like random vibrations. The DMs did not show any significant functional nor performance degradation at $10^{-8}$ contrast levels.

astro-ph.IM↗

arXiv2022

Adaptive optics performance of a simulated coronagraph instrument on a large, segmented space telescope in steady state

Directly imaging Earth-like exoplanets (``exoEarths'') with a coronagraph instrument on a space telescope requires a stable wavefront with optical path differences limited to tens of picometers RMS during exposure times of a few hours. While the structural dynamics of a segmented mirror can be directly stabilized with telescope metrology, another possibility is to use a closed-loop wavefront sensing and control system in the coronagraph instrument that operates during the science exposures to actively correct the wavefront and relax the constraints on the stability of the telescope. In this paper, we present simulations of the temporal filtering provided using the example of LUVOIR-A, a 15~m segmented telescope concept. Assuming steady-state aberrations based on a finite element model of the telescope structure, we (1)~optimize the system to minimize the wavefront residuals, (2)~ use an end-to-end numerical propagation model to estimate the residual starlight intensity at the science detector, and (3)~predict the number of exoEarth candidates detected during the mission. We show that telescope dynamic errors of 100~pm~RMS can be reduced down to 30~pm~RMS with a magnitude 0 star, improving the contrast performance by a factor of 15. In scenarios where vibration frequencies are too fast for a system that uses natural guide stars, laser sources can increase the flux at the wavefront sensor to increase the servo-loop frequency and mitigate the high temporal frequency wavefront errors. For example, an external laser with an effective magnitude of -4 allows the wavefront from a telescope with 100~pm~RMS dynamic errors and strong vibrations as fast as 16~Hz to be stabilized with residual errors of 10~pm~RMS thereby increasing the number of detected planets by at least a factor of 4.

astro-ph.IM↗

arXiv2022

Contrast performance of an 8m off-axis, segmented space telescope equipped with an adaptive optics system

The Astro2020 decadal survey recommended an infrared, optical, ultra-violet (IR/O/UV) telescope with a $\sim$6~m inscribed diameter and equipped with a coronagraph instrument to directly image exoEarths in the habitable zone of their host star. A telescope of such size may need to be segmented to be folded and then carried by current launch vehicles. However, a segmented primary mirror introduces the potential for additional mid spatial frequency optical wavefront instabilities during the science operations that would degrade the coronagraph performance. A coronagraph instrument with a wavefront sensing and control (WS\&C) system can stabilize the wavefront with a picometer precision at high temporal frequencies ($>$1Hz). In this work, we study a realistic set of aberrations based on a finite element model of a slightly larger (8m circumscribed, 6.7m inscribed diameter) segmented telescope with its payload. We model an adaptive optics (AO) system numerically to compute the post-AO residuals. The residuals then feed an end-to-end model of a vortex coronagraph instrument. We report the long exposure contrast and discuss the overall benefits of the adaptive optics system in the flagship mission success.

astro-ph.IM↗

arXiv2022

Broadband Vector Vortex Coronagraph Testing at NASA's High Contrast Imaging Testbed Facility

The unparalleled theoretical performance of an ideal vector vortex coronagraph makes it one of the most promising technologies for directly imaging exoplanets with a future, off-axis space telescope. However, the image contrast required for observing the light reflected from Earth-sized planets ($\sim10^{-10}$) has yet to be demonstrated in a laboratory setting. With recent advances in the manufacturing of liquid crystal vector vortex waveplates as well as system-level performance improvements on our testbeds, we have achieved raw contrast of 1.6$\times10^{-9}$ and 5.9$\times10^{-9}$ in 10% and 20% optical bandwidths, respectively, averaged over 3-10$λ/D$ separations on one side of the pseudo-star. The former represents a factor of 10 improvement over the previously reported performance. We show experimental comparisons of the contrast achieved as a function of spectral bandwidth. We provide estimates of the limiting error terms and discuss the improvements needed to close the gap in contrast performance required for future exoplanet imaging space telescopes.

astro-ph.IM↗

arXiv2021

Flight mask designs of the Roman Space Telescope Coronagraph Instrument

Over the past two decades, thousands of confirmed exoplanets have been detected; the next major challenge is to characterize these other worlds and their stellar systems. Much information on the composition and formation of exoplanets and circumstellar debris disks can only be achieved via direct imaging. Direct imaging is challenging because of the small angular separations ($<1$ arcsec) and high star-to-planet flux ratios (${\sim}10^{9}$ for a Jupiter analog or ${\sim}10^{10}$ for an Earth analog in the visible). Atmospheric turbulence prohibits reaching such high flux ratios on the ground, so observations must be made above the Earth's atmosphere. The Nancy Grace Roman Space Telescope (Roman), set to launch in the mid-2020s, will be the first space-based observatory to demonstrate high-contrast imaging with active wavefront control using its Coronagraph Instrument. The instrument's main purpose is to mature the various technologies needed for a future flagship mission to image and characterize Earth-like exoplanets. These technologies include two high-actuator-count deformable mirrors, photon-counting detectors, two complementary wavefront sensing and control loops, and two different coronagraph types. In this paper, we describe the complete set of flight coronagraph mask designs and their intended combinations in the Roman Coronagraph Instrument. There are three types of mask configurations included: a primary one designed to meet the instrument's top-level requirement, three that are supported on a best-effort basis, and several unsupported ones contributed by the NASA Exoplanet Exploration Program. The unsupported mask configurations could be commissioned and used if the instrument is approved for operations after its initial technology demonstration phase.

astro-ph.IM↗

arXiv2021

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) Technology Demonstration

The Coronagraph Instrument (CGI) on the Nancy Grace Roman Space Telescope will demonstrate the high-contrast technology necessary for visible-light exoplanet imaging and spectroscopy from space via direct imaging of Jupiter-size planets and debris disks. This in-space experience is a critical step toward future, larger missions targeted at direct imaging of Earth-like planets in the habitable zones of nearby stars. This paper presents an overview of the current instrument design and requirements, highlighting the critical hardware, algorithms, and operations being demonstrated. We also describe several exoplanet and circumstellar disk science cases enabled by these capabilities. A competitively selected Community Participation Program team will be an integral part of the technology demonstration and could perform additional CGI observations beyond the initial tech demo if the instrument performance warrants it.

astro-ph.IM↗

arXiv2020

Experimental analysis of the achromatic performance of a vector vortex coronagraph

The vector vortex coronagraph is an instrument designed for direct detection and spectroscopy of exoplanets over a broad spectral range. Our team is working towards demonstrating contrast performance commensurate with imaging temperate, terrestrial planets orbiting solar-type stars using the High Contrast Imaging Testbed facility at NASA's Jet Propulsion Laboratory. To date, the best broadband performance achieved is $\sim$10$^{-8}$ raw contrast over a bandwidth of $Δλ/λ$=10\% in the visible regime (central wavelengths of 550-750 nm), while monochromatic tests yield much deeper contrast ($\sim$10$^{-9}$ or better). In this study, we analyze the main performance limitations on the testbeds so far, focusing on the quality of the focal plane mask manufacturing. We measure the polarization properties of the masks and the residual electric field in the dark hole as a function of wavelength. Our results suggest that the current performance is limited by localized defects in the in the focal plane masks. A new generation of masks is under test that have fewer defects and promise performance improvements.

astro-ph.IM↗

arXiv2020

Wavefront sensing and control in space-based coronagraph instruments using Zernike's phase-contrast method

Future space telescopes with coronagraph instruments will use a wavefront sensor (WFS) to measure and correct for phase errors and stabilize the stellar intensity in high-contrast images. The HabEx and LUVOIR mission concepts baseline a Zernike wavefront sensor (ZWFS), which uses Zernike's phase contrast method to convert phase in the pupil into intensity at the WFS detector. In preparation for these potential future missions, we experimentally demonstrate a ZWFS in a coronagraph instrument on the Decadal Survey Testbed in the High Contrast Imaging Testbed facility at NASA's Jet Propulsion Laboratory. We validate that the ZWFS can measure low- and mid-spatial frequency aberrations up to the control limit of the deformable mirror, with surface height sensitivity as small as 1 pm, using a configuration similar to the HabEx and LUVOIR concepts. Furthermore, we demonstrate closed-loop control, resolving an individual DM actuator, with residuals consistent with theoretical models. In addition, we predict the expected performance of a ZWFS on future space telescopes using natural starlight from a variety of spectral types. The most challenging scenarios require ~1 hr of integration time to achieve picometer sensitivity. This timescale may be drastically reduced by using internal or external laser sources for sensing purposes. The experimental results and theoretical predictions presented here advance the WFS technology in the context of the next generation of space telescopes with coronagraph instruments.

astro-ph.IM↗

arXiv2020

Microelectromechanical deformable mirror development for high-contrast imaging, part 2: the impact of quantization errors on coronagraph image contrast

Stellar coronagraphs rely on deformable mirrors (DMs) to correct wavefront errors and create high contrast images. Imperfect control of the DM limits the achievable contrast and, therefore, the DM control electronics must provide fine surface height resolution and low noise. Here, we study the impact of quantization errors due to the DM electronics on the image contrast using experimental data from the High Contrast Imaging Testbed (HCIT) facility at NASA's Jet Propulsion Laboratory (JPL). We find that the simplest analytical model gives optimistic predictions compared to real cases, with contrast up to 3 times better, which leads to DM surface height resolution requirements that are incorrectly relaxed by 70%. We show that taking into account the DM actuator shape, or influence function, improves the analytical predictions. However, we also find that end-to-end numerical simulations of the wavefront sensing and control process provide the most accurate predictions and recommend such an approach for setting robust requirements on the DM control electronics. From our experimental and numerical results, we conclude that a surface height resolution of approximately 6pm is required for imaging temperate terrestrial exoplanets around Solar-type stars at wavelengths as small as 450nm with coronagraph instruments on future space telescopes. Finally, we list the recognizable characteristics of quantization errors that may help determine if they are a limiting factor.

astro-ph.IM↗