Searcharxiv⌕ Search

arXiv subjects

A. Amara

Publications and source records attributed to A. Amara.

At least 37 records · Page 2Linked to original sources

Euclid preparation. LXXXIX. Accurate and precise data-driven angular power spectrum covariances

We develop techniques for generating accurate and precise internal covariances for measurements of clustering and weak-lensing angular power spectra. These methods have been designed to produce non-singular and unbiased covariances for Euclid's large anticipated data vector and will be critical for validation against observational systematic effects. We constructed jackknife segments that are equal in area to a high precision by adapting the binary space partition algorithm to work on arbitrarily shaped regions on the unit sphere. Jackknife estimates of the covariances are internally derived and require no assumptions about cosmology or galaxy population and bias. Our covariance estimation, called DICES (Debiased Internal Covariance Estimation with Shrinkage), first estimated a noisy covariance through conventional delete-1 jackknife resampling. This was followed by linear shrinkage of the empirical correlation matrix towards the Gaussian prediction, rather than linear shrinkage of the covariance matrix. Shrinkage ensures the covariance is non-singular and therefore invertible, which is critical for the estimation of likelihoods and validation. We then applied a delete-2 jackknife bias correction to the diagonal components of the jackknife covariance that removed the general tendency for jackknife error estimates to be biased high. We validated internally derived covariances, which used the jackknife resampling technique, on synthetic Euclid-like lognormal catalogues. We demonstrate that DICES produces accurate, non-singular covariance estimates, with the relative error improving by 33% for the covariance and 48% for the correlation structure in comparison to jackknife estimates. These estimates can be used for highly accurate regression and inference.

astro-ph.CO↗

Euclid Quick Data Release (Q1). AgileLens: A scalable CNN-based pipeline for strong gravitational lens identification

We present an end-to-end, iterative pipeline for efficient identification of strong galaxy--galaxy lensing systems, applied to the Euclid Q1 imaging data. Starting from VIS catalogues, we reject point sources, apply a magnitude cut (I$_E$ $\leq$ 24) on deflectors, and run a pixel-level artefact/noise filter to build 96 $\times$ 96 pix cutouts; VIS+NISP colour composites are constructed with a VIS-anchored luminance scheme that preserves VIS morphology and NISP colour contrast. A VIS-only seed classifier supplies clear positives and typical impostors, from which we curate a morphology-balanced negative set and augment scarce positives. Among the six CNNs studied initially, a modified VGG16 (GlobalAveragePooling + 256/128 dense layers with the last nine layers trainable) performs best; the training set grows from 27 seed lenses (augmented to 1809) plus 2000 negatives to a colour dataset of 30,686 images. After three rounds of iterative fine-tuning, human grading of the top 4000 candidates ranked by the final model yields 441 Grade A/B candidate lensing systems, including 311 overlapping with the existing Q1 strong-lens catalogue, and 130 additional A/B candidates (9 As and 121 Bs) not previously reported. Independently, the model recovers 740 out of 905 (81.8%) candidate Q1 lenses within its top 20,000 predictions, considering off-centred samples. Candidates span I$_E$ $\simeq$ 17--24 AB mag (median 21.3 AB mag) and are redder in Y$_E$--H$_E$ than the parent population, consistent with massive early-type deflectors. Each training iteration required a week for a small team, and the approach easily scales to future Euclid releases; future work will calibrate the selection function via lens injection, extend recall through uncertainty-aware active learning, explore multi-scale or attention-based neural networks with fast post-hoc vetters that incorporate lens models into the classification.

astro-ph.GA↗

Euclid preparation. Impact of redshift distribution uncertainties on the joint analysis of photometric galaxy clustering and weak gravitational lensing

One of the $\textit{Euclid}$ mission's key projects is the so-called 3$\times$2pt analysis, that is, the combination of cosmic shear, photometric galaxy clustering, and galaxy-galaxy lensing. Although $\textit{Euclid}$ has established quality requirements for the photo-$z$ accuracy needed for the weak lensing galaxy sample, no such requirements have been set for the photometric clustering sample. In this paper, we investigate the impact of redshift uncertainties on $\textit{Euclid}$'s photometric galaxy clustering analysis and its combination with weak gravitational lensing, focusing on data release 1 (DR1). In particular, we study whether having precise knowledge of the mean of the redshift distributions per bin is sufficient to avoid biases in the resulting cosmological constraints or whether accuracy in the higher-order moments of the distribution is required. We evaluate the results based on their constraining power on $w_{\mathrm{0}}$ and $w_{a}$ and define thresholds for the precision and accuracy of $\textit{Euclid}$'s redshift distribution of the photometric clustering sample. We find that the redshift distributions of the photometric clustering sample must be known at an accuracy of 0.004(1+$z$) in the mean in order to recover 80$\%$ of the constraining power in $\textit{Euclid}$'s DR1 $w_{\mathrm{0}}w_{a}$CDM 3$\times$2pt analysis. The impact of the uncertainty on the width is negligible, provided the mean redshift is constrained with sufficient accuracy. For most sources of redshift distribution error, attaining the requirement on the mean will also reduce uncertainty in the width well below the required level.

astro-ph.CO↗

Euclid preparation. The impact of redshift interlopers on the two-point correlation function analysis

The Euclid survey aims to measure the spectroscopic redshift of emission-line galaxies by identifying the H$\,α$ line in their slitless spectra. This method is sensitive to the signal-to-noise ratio of the line, as noise fluctuations or other strong emission lines can be misidentified as H$\,α$, depending on redshift. These effects lead to catastrophic redshift errors and the inclusion of interlopers in the sample. We forecast the impact of such redshift errors on galaxy clustering measurements. In particular, we study the effect of interloper contamination on the two-point correlation function (2PCF), the growth rate of structures, and the Alcock-Paczynski (AP) parameters. We analyze 1000 synthetic spectroscopic catalogues, the EuclidLargeMocks, designed to match the area and selection function of the Data Release 1 (DR1) sample. We estimate the 2PCF of the contaminated catalogues, isolating contributions from correctly identified galaxies and from interlopers. We explore different models with increasing complexity to describe the measured 2PCF at fixed cosmology. Finally, we perform a cosmological inference and evaluate the systematic error on the inferred $fσ_8$, $α_{\parallel}$ and $α_{\perp}$ values associated with different models. Our results demonstrate that a minimal modelling approach, which only accounts for an attenuation of the clustering signal regardless of the type of contaminants, is sufficient to recover the correct values of $fσ_8$, $α_{\parallel}$, and $α_{\perp}$ at DR1. The accuracy and precision of the estimated AP parameters are largely insensitive to the presence of interlopers. The adoption of a minimal model induces a 1%-3% systematic error on the growth rate of structure estimation, depending on the redshift. However, this error remains smaller than the statistical error expected for the Euclid DR1 analysis.

astro-ph.CO↗

Euclid Quick Data Release (Q1) -- Characteristics and limitations of the spectroscopic measurements

The SPE processing function (PF) of the \Euclid pipeline is dedicated to the automatic analysis of one-dimensional spectra to determine redshifts, line fluxes, and spectral classifications. The first \Euclid Quick Data Release (Q1) delivers these measurements for all $H_\mathrm{E}<22.5$ objects identified in the photometric survey. In this paper, we present an overview of the SPE PF algorithm and assess its performance by comparing its results with high-quality spectroscopic redshifts from the Dark Energy Spectroscopic Instrument (DESI) survey in the Euclid Deep Field North. Our findings highlight remarkable accuracy in successful redshift measurements, with a bias of less than $3 \times 10^{-5}$ in $(z_{\rm SPE}-z_{\rm DESI})/(1+z_{\rm DESI})$ and a high precision of approximately $10^{-3}$. The majority of spectra have only a single spectral feature or none at all. To avoid spurious detections, where noise features are misinterpreted as lines or lines are misidentified, it is therefore essential to apply well-defined criteria on quantities such as the redshift probability or the \ha\ flux and signal-to-noise ratio. Using a well-tuned quality selection, we achieve an 89\% redshift success rate in the target redshift range for cosmology ($0.9<z<1.8$), which is well covered by DESI for $z<1.6$. Outside this range where the \ha\ line is observable, redshift measurements are less reliable, except for sources showing specific spectral features (e.g., two bright lines or strong continuum). Ongoing refinements along the entire chain of PFs are expected to enhance both the redshift measurements and the spectral classification, allowing us to define the large and reliable sample required for cosmological analyses. Overall, the Q1 SPE results are promising, demonstrating encouraging potential for cosmology.

astro-ph.CO↗

Euclid: Discovery of bright $z\simeq7$ Lyman-break galaxies in UltraVISTA and Euclid COSMOS

We present a search for $z\simeq7$ Lyman-break galaxies using the $1.72 \, \rm{deg}^2$ near-infrared UltraVISTA survey in the COSMOS field, reaching $5\,σ$ depths in $Y$ of 26.2. We incorporate deep optical and Spitzer imaging for a full spectral energy distribution (SED) fitting analysis. We find 289 candidate galaxies at $6.5\leq z \leq 7.5$ covering $-22.6 \leq M_{\rm UV} \leq -20.2$, faint enough to overlap with Hubble Space Telescope studies. We conduct a separate selection by including complementary Euclid performance verification imaging (reaching $5\,σ$ depths of $26.3$), yielding 140 galaxies in $0.65 \, \rm{deg}^2$, with 38 sources unique to this sample. We compute the rest-frame UV luminosity function (UV LF) from our samples, extending below the knee ($M^*=-21.14^{+0.28}_{-0.25}$). We find that the shape of the UV LF is consistent with both a Schechter function and double-power law (DPL) at the magnitudes probed by this sample, with a DPL preferred at $M_{\rm UV}<-22.5$ when bright-end results are included. The UltraVISTA+Euclid sample provides a clean measurement of the LF due to the overlapping near-infrared filters identifying molecular absorption features in the SEDs of ultra-cool dwarf interlopers, and additional faint galaxies are recovered. A comparison with JWST LFs at $z>7$ suggests a gentle evolution in the bright-end slope, although this is limited by a lack of robust bright-end measurements at $z>9$. We forecast that in the Euclid Deep Fields, the removal of contaminant ultra-cool dwarfs as point sources will be possible at $J_{\rm E} < 24.5$. Finally, we present a high-equivalent-width Lyman-$α$ emitter candidate identified by combining HSC, VISTA, and Euclid broadband photometry, highlighting the synergistic power these instruments will have in the Euclid Auxiliary Fields for identifying extreme sources in the Epoch of Reionisation.

astro-ph.GA↗

Euclid: An automated system to match Rubin transient alerts to Euclid observations

The Vera C. Rubin observatory is expected to produce 10 million transient alerts per night in ugrizy filters, whilst Euclid is a visible to near-infrared space telescope engaged in a wide field survey. We present a prototype system to automatically match the transient alerts from Rubin to Euclid observations. The system produces joint light-curves containing both visible and near-infrared photometry, and joint image cutouts. Using Zwicky Transient Facility alerts as a proxy for Rubin, we demonstrate the system in use in cases where Euclid did and did not detect the transient and highlight the value that can be added in each case. For transients detected by Euclid these benefits include identifying the supernovae (SNe) in observations taken prior to ground-based detection, thereby better constraining the explosion time, such as SN 2024pvw detected ~3 d prior to ground based detections. In cases where Euclid did not detect the transient, we demonstrate the benefit of adding Euclid observations to improve host morphology measurements and associations.

astro-ph.IM↗

Euclid Quick Data Release (Q1). LEMON -- Lens Modelling with Neural networks. Automated and fast modelling of Euclid gravitational lenses with a singular isothermal ellipsoid mass profile

The Euclid mission aims to survey around 14000 deg^{2} of extragalactic sky, providing around 10^{5} gravitational lens images. Modelling of gravitational lenses is fundamental to estimate the total mass of the lens galaxy, along with its dark matter content. Traditional modelling of gravitational lenses is computationally intensive and requires manual input. In this paper, we use a Bayesian neural network, LEns MOdelling with Neural networks (LEMON), to model Euclid gravitational lenses with a singular isothermal ellipsoid mass profile. Our method estimates key lens mass profile parameters, such as the Einstein radius, while also predicting the light parameters of foreground galaxies and their uncertainties. We validate LEMON's performance on both mock Euclid datasets, real lenses observed with Hubble Space Telescope (HST), and real Euclid lenses, demonstrating the ability of LEMON to predict parameters of both simulated and real lenses. Results show promising accuracy and reliability in predicting the Einstein radius, mass and light ellipticities, effective radius, Sérsic index, lens magnitude, and unlensed source position for simulated lens galaxies. The application to real data, including the latest Quick Release 1 strong lens candidates, provides encouraging results in the recovery of the parameters for real lenses. We also verified that LEMON has the potential to accelerate traditional modelling methods, by giving to the classical optimiser the LEMON predictions as starting points, resulting in a speed-up of up to 26 times the original time needed to model a sample of gravitational lenses, a result that would be impossible with randomly initialised guesses. This work represents a significant step towards efficient, automated gravitational lens modelling, which is crucial for handling the large data volumes expected from Euclid.

astro-ph.CO↗

Euclid preparation: LXXXVII. Non-Gaussianity of 2-point statistics likelihood: Precise analysis of the matter power spectrum distribution

We investigate the non-Gaussian features in the distribution of the matter power spectrum multipoles. Using the COVMOS method, we generate 100\,000 mock realisations of dark matter density fields in both real and redshift space across multiple redshifts and cosmological models. We derive an analytical framework linking the non-Gaussianity of the power spectrum distribution to higher-order statistics of the density field, including the trispectrum and pentaspectrum. We explore the effect of redshift-space distortions, the geometry of the survey, the Fourier binning, the integral constraint, and the shot noise on the skewness of the distribution of the power spectrum measurements. Our results demonstrate that the likelihood of the estimated matter power spectrum deviates significantly from a Gaussian assumption on nonlinear scales, particularly at low redshift. This departure is primarily driven by the pentaspectrum contribution, which dominates over the trispectrum at intermediate scales. We also examine the impact of the finiteness of the survey geometry in the context of the Euclid mission and find that both the shape of the survey and the integral constraint amplify the skewness.

astro-ph.CO↗

Euclid: An emulator for baryonic effects on the matter bispectrum

Understanding the impact of baryonic processes such as star formation and active galactic nuclei (AGN) feedback on matter clustering is crucial to ensure precise and unbiased cosmological inference. Most theoretical models of baryonic effects to date focus on two-point statistics, neglecting higher-order contributions. This work develops a fast and accurate emulator for baryonic effects on the matter bispectrum, a key non-Gaussian statistic in the nonlinear regime. We employ high-resolution $N$-body simulations from the BACCO suite and apply a combination of cutting-edge techniques such as cosmology scaling and baryonification to efficiently span a large cosmological and astrophysical parameter space. A deep neural network is trained to emulate baryonic effects on the matter bispectrum measured in simulations, capturing modifications across various scales and redshifts relevant to Euclid. We validate the emulator accuracy and robustness using an analysis of \Euclid mock data, employing predictions from the state-of-the-art FLAMINGO hydrodynamical simulations. The emulator reproduces baryonic suppression in the bispectrum to better than 2$\%$ for the $68\%$ percentile across most triangle configurations for $k \in [0.01, 20]\,\mathrm{i}h\mathrm{Mpc}^{-1}$ and ensures consistency between cosmological posteriors inferred from second- and third-order weak lensing statistics. These results demonstrate that our emulator meets the high-precision requirements of the Euclid mission for at least the first data release and provides reliable forecasts of the cosmological information contained in the small-scale matter bispectrum. This underscores the potential of emulation techniques to bridge the gap between complex baryonic physics and observational data, maximising the scientific output of Euclid.

astro-ph.CO↗

Euclid Quick Data Release (Q1). Quenching precedes bulge formation in dense environments but follows it in the field

(Abridged) The bimodality between star-forming discs and quiescent spheroids requires the existence of two main processes: the galaxy quenching and the morphological transformation. In this paper, we aim to understand the link between these processes and their relation with the stellar mass of galaxies and their local environment. Taking advantage of the first data released by the Euclid Collaboration, covering more than 60 deg2 with space-based imaging and photometry, we analyse a mass-complete sample of nearly one million galaxies in the range 0.25 10^{9.5} M_\odot$. We divide the sample into four sub-populations of galaxies, based on their star-formation activity and morphology. We then analyse the physical properties of these populations and their relative abundances in the stellar mass vs. local density plane. Together with confirming the passivity-density relation and the morphology-density relation, we find that quiescent discy galaxies are more abundant in the low-mass regime of high-density environment. At the same time, star-forming bulge-dominated galaxies are more common in field regions, preferentially at high masses. Building on these results and interpreting them through comparison with simulations, we propose a scenario where the evolution of galaxies in the field significantly differs from that in higher-density environments. The morphological transformation in the majority of field galaxies takes place before the onset of quenching and is mainly driven by secular processes taking place within the main sequence, leading to the formation of star-forming bulge-dominated galaxies as intermediate-stage galaxies. Conversely, quenching of star formation precedes morphological transformation for most galaxies in higher-density environments. This causes the formation of quiescent disc-dominated galaxies before their transition into bulge-dominated ones.

astro-ph.GA↗

Euclid: Galaxy SED reconstruction in the PHZ processing function: impact on the PSF and the role of medium-band filters

Weak lensing surveys require accurate correction for the point spread function (PSF) when measuring galaxy shapes. For a diffraction-limited PSF, as arises in space-based missions, this correction depends on each galaxy SED. In the Euclid mission, galaxy SED reconstruction, a tasks of the photometric-redshift processing function (PHZ PF), relies on broad- and medium-band ancillary photometry. The limited wavelength sampling of the Euclid VIS passband and signal-to-noise ratio may affect the reconstruction accuracy and translate into biases in the weak lensing measurements. In this study, we present the methodology, which is employed in the Euclid PHZ PF, for reconstructing galaxy SEDs at 55 wavelengths, sampling the VIS passband every 10 nm, and we assess whether it fulfils the accuracy requirements imposed on the Euclid PSF model. We employ both physics- and data-driven methods, focusing on a new approach of template-based flux correction and Gaussian processes, and we introduce an SED metric whose bias propagates into PSF quadrupole moment errors. Our findings demonstrate that Gaussian processes and template fitting meet the requirements only in specific, but complementary, redshift intervals. We therefore propose a hybrid approach, which leverages both methods. This solution proves to be effective in meeting the Euclid accuracy requirements for most of the redshift range of the survey. Finally, we investigate the impact on the SED reconstruction of a new set of 16 evenly-spaced medium-band filters for the Subaru telescope, providing quasi-spectroscopic coverage of the VIS passband. This study shows promising results, ensuring accurate SED reconstruction and meeting the mission PSF requirements. This work thus provides not only the methodological foundation of galaxy SED reconstruction in the Euclid PHZ PF, but also a roadmap for future improvements using a new medium-band survey.

astro-ph.CO↗

Euclid preparation. 3D reconstruction of the cosmic web with simulated Euclid Deep spectroscopic samples

The ongoing Euclid mission aims to measure spectroscopic redshifts for approximately two million galaxies using the H $α$ line emission detected in near-infrared slitless spectroscopic data from the Euclid Deep Fields (EDFs). These measurements will reach a flux limit of $5\times 10^{-17}\,{\rm erg}\,{\rm cm}^{-2}\,{\rm s}^{-1}$ in the redshift range $0.4<z<1.8$, opening the door to numerous investigations involving galaxy evolution, extending well beyond the mission's core objectives. The achieved H $α$ luminosity depth will lead to a sufficiently high sampling, enabling the reconstruction of the large-scale galaxy environment. We assess the quality of the reconstruction of the galaxy cosmic web environment with the expected spectroscopic dataset in EDFs. The analysis is carried out on the Flagship and GAEA galaxy mock catalogues. The quality of the reconstruction is first evaluated using geometrical and topological statistics measured on the cosmic web, namely the length of filaments, the area of walls, the volume of voids, and its connectivity and multiplicity. We then quantify how accurately gradients in galaxy properties with distance from filaments can be recovered. As expected, the small-scale redshift-space distortions, have a strong impact on filament lengths and connectivity, but can be mitigated by compressing galaxy groups before skeleton extraction. The cosmic web reconstruction is biased when relying solely on H $α$ emitters. This limitation can be mitigated by applying stellar mass weighting during the reconstruction. However, this approach introduces non-trivial biases that need to be accounted for when comparing to theoretical predictions. Redshift uncertainties pose the greatest challenge in recovering the expected dependence of galaxy properties, though the well-established stellar mass transverse gradients towards filaments can still be observed.

astro-ph.GA↗

Euclid: Photometric redshift calibration with self-organising maps

The Euclid survey aims to trace the evolution of cosmic structures up to redshift $z$ $\sim$ 3 and beyond. Its success depends critically on obtaining highly accurate mean redshifts for ensembles of galaxies $n(z)$ in all tomographic bins, essential for deriving robust cosmological constraints. However, photometric redshifts (photo-$z$s) suffer from systematic biases arising from various sources of uncertainty. To address these challenges, we utilised self-organising maps (SOMs) with mock samples resembling the Euclid Wide Survey (EWS), to validate Euclid's uncertainty requirement of $|Δ\langle z \rangle| = \langle z_{\text{est}} \rangle - \langle z \rangle \leq 0.002 (1+z)$ per tomographic bin, assuming DR3-level data. We observe that defining the redshift tomography using the mean spectroscopic redshift (spec-$z$) per SOM cell, results in none of the ten tomographic redshift bins satisfying the requirement. In contrast, the redshift tomography on the photo-$z$s of the EWS-like sample yields superior results, with eight out of ten bins [$0 < z\leq 2.5$] meeting the Euclid requirement. To enhance the realism of our study, we morph our calibration sample to mimic the C3R2 survey in incremental steps. In this context, a maximum of six out of ten bins meet the requirement, strongly advocating the adoption of a redshift tomography defined by the photo-$z$s of individual galaxies rather than the commonly used mean spec-$z$ of SOM cells. To examine the impact on the expected biases for $Ω_{\text{m}}$, $σ_{8}$, and $Δw_{0}$ measured by Euclid, we perform a Fisher forecast for cosmic shear only, based on our redshift uncertainties. Here, we find that even under an evaluation of the uncertainty where the impact of the redshift bias is substantial, most absolute biases remain below 0.1$σ$ in the idealised scenario and below 0.3$σ$ in the more realistic case.

astro-ph.CO↗

Euclid Quick Data Release (Q1): VIS processing and data products

This paper describes the VIS Processing Function (VIS PF) of the Euclid ground segment pipeline, which processes and calibrates raw data from the VIS camera. We present the algorithms used in each processing element, along with a description of the on-orbit performance of VIS PF, based on Performance Verification (PV) and Q1 data. We demonstrate that the principal performance metrics (image quality, astrometric accuracy, photometric calibration) are within pre-launch specifications. The image-to-image photometric scatter is less than $0.8\%$, and absolute astrometric accuracy compared to Gaia is $5$ mas Image quality is stable over all Q1 images with a full width at half maximum (FWHM) of $0.\!^{\prime\prime}16$. The stacked images (combining four nominal and two short exposures) reach $I_\mathrm{E} = 25.6$ ($10σ$, measured as the variance of $1.\!^{\prime\prime}3$ diameter apertures). We also describe quality control metrics provided with each image, and an appendix provides a detailed description of the provided data products. The excellent quality of these images demonstrates the immense potential of Euclid VIS data for weak lensing. VIS data, covering most of the extragalactic sky, will provide a lasting high-resolution atlas of the Universe.

astro-ph.IM↗

Euclid: Quick Data Release (Q1) -- A photometric search for ultracool dwarfs in the Euclid Deep Fields

We present a catalogue of 5306 new ultracool dwarf (UCD) candidates in the three Euclid Deep Fields in the Q1 data release. They range from late M to late T dwarfs, and include 1200 L and T dwarfs. A total of 546 objects have been spectroscopically confirmed, including 329 L dwarfs and 26 T dwarfs. We also provide empirical Euclid colours as a function of spectral type. Our UCD selection criteria are based only on colour ($I_\mathrm{E}-Y_\mathrm{E}>2.5$). The combined requirement for optical detection and stringent signal-to-noise ratio threshold ensure a high purity of the sample, but at the expense of completeness, especially for T dwarfs. The detections range from magnitudes 19 and 24 in the near-infrared bands, and extend down to 26 in the optical band. We discuss Euclid's capability to identify UCD candidates based on its photometric passbands. The average surface density of detected UCDs on the sky is approximately 100 objects per $\mathrm{deg}^2$, including 20 L and T dwarfs per $\mathrm{deg}^2$. This leads to an expectation of at least 1.4 million ultracool dwarfs in the final data release of the Euclid Wide Survey, including at least $300\,000$ L dwarfs, and more than 2600 T dwarfs, using the strict selection criteria from this work.

astro-ph.SR↗

Euclid Structural-Thermal-Optical Performance

The Euclid system performance is defined in terms of image quality metrics tuned to the weak gravitational lensing (WL) cosmological probe. WL induces stringent requirements on the shape and stability of the VIS instrument system point spread function (PSF). The PSF is affected by error contributions from the telescope, the focal plane and image motion, and is controlled by a global error budget with error allocations to each contributor. Aims. During spacecraft development, we verified through a structural-thermal-optical performance (STOP) analysis that the built and verified telescope with its spacecraft interface meets the in-orbit steady-state and transient image quality requirements. Methods. For the purposes of the STOP analysis, a detailed finite-element mathematical model was set up and a standard set of test cases, both steady-state and transient, was defined, comprising combinations of worst-case boundary conditions. Results. The STOP analysis addressed the interaction of all spacecraft components in transmitting temperature-induced loads that lead to optical train deformation. The results of the prelaunch analysis demonstrated that temperature-induced optical perturbations will be well below the allowable limits for all permitted observing conditions. During the first year in orbit, we used the STOP analysis predictions to help interpret the measured performance as a function of environmental variables. Unpredicted disturbances were discovered and unexpected sensitivities were revealed. In-orbit temperature variations are small (<300 mK) and so are their effects on the telescope structure, but they are detected in the time histories of the image quality metrics and are a non-negligible factor in the PSF stability budget demanded by the WL science. Taking everything into account, our analysis confirms the excellent overall performance of the telescope.

astro-ph.IM↗

Euclid Quick Data Release (Q1): Hunting for luminous z > 6 galaxies in the Euclid Deep Fields -- forecasts and first bright detections

The evolution of the rest-frame ultraviolet luminosity function (UV LF) is a powerful probe of early star formation and stellar mass build-up. At z > 6, its bright end (MUV < -21) remains poorly constrained due to the small volumes of existing near-infrared (NIR) space-based surveys. The Euclid Deep Fields (EDFs) will cover 53 deg^2 with NIR imaging down to 26.5 AB, increasing area by a factor of 100 over previous space-based surveys. They thus offer an unprecedented opportunity to select bright z > 6 Lyman break galaxies (LBGs) and constrain the UV LF's bright end. With NIR coverage extending to 2um, Euclid can detect galaxies out to z = 13. We present forecasts for the number densities of z > 6 galaxies expected in the final EDF dataset. Using synthetic photometry from spectral energy distribution (SED) templates of z = 5--15 galaxies, z = 1--4 interlopers, and Milky Way MLT dwarfs, we explore optimal selection methods for high-z LBGs. A combination of S/N cuts with SED fitting (from optical to MIR) yields the highest-fidelity sample, recovering >76% of input z > 6 LBGs while keeping low-z contamination <10%. This excludes instrumental artefacts, which will affect early Euclid releases. Auxiliary data are critical: optical imaging from the Hyper Suprime-Cam and Vera C. Rubin Observatory distinguishes genuine Lyman breaks, while Spitzer/IRAC data help recover z > 10 sources. Based on empirical double power-law LF models, we expect >100,000 LBGs at z = 6-12 and >100 at z > 12 in the final Euclid release. In contrast, steeper Schechter models predict no z > 12 detections. We also present two ultra-luminous (MUV < -23.5) candidates from the EDF-N Q1 dataset. If their redshifts are confirmed, their magnitudes support a DPL LF model at z > 9, highlighting Euclid's power to constrain the UV LF's bright end and identify the most luminous early galaxies for follow-up.

astro-ph.GA↗