arXiv subjects

A. Anthony

Publications and source records attributed to A. Anthony.

10 recordsLinked to original sources

arXiv2025

Impact of the in-medium cross section on cluster spectra in ${}^{40,48}\mathrm{Ca}+{}^{58,64}\mathrm{Ni}$ collisions at $56$ and $140$ $\mathbf{\mathrm{MeV}}/\mathrm{\mathbf{nucleon}}$

Although significant efforts have been made to investigate the density dependence of the nuclear symmetry energy, the influence of the in-medium cross section on particle production in transport models is not well constrained. The in-medium cross section reflects the dynamic situation of the medium such as a nontrivial phase space distribution. In this study, we analyze the transverse momentum spectra of $p$, $d$, $t$, ${}^3{\mathrm{He}}$ and $\alpha$ particles emitted near mid-rapidity in central $^{40,48}\mathrm{Ca}$ + $^{58, 64}\mathrm{Ni}$ reactions at $56$ and $140$ $\mathrm{MeV}/\mathrm{nucleon}$. The Antisymmetrized Molecular Dynamics ($\mathrm{AMD}$) model is chosen as the transport model for data comparison. Central events are selected based on charged-particle multiplicity in both the experimental data and AMD calculations after applying an experimental filter. Our results show that the in-medium nucleon-nucleon scattering cross-sections are more strongly reduced at $56$ $\mathrm{MeV}/\mathrm{nucleon}$ than at $140$ $\mathrm{MeV}/\mathrm{nucleon}$ incident energy.

nucl-th↗

arXiv2025

Object Detection with Deep Learning for Rare Event Search in the GADGET II TPC

In the pursuit of identifying rare two-particle events within the GADGET II Time Projection Chamber (TPC), this paper presents a comprehensive approach for leveraging Convolutional Neural Networks (CNNs) and various data processing methods. To address the inherent complexities of 3D TPC track reconstructions, the data is expressed in 2D projections and 1D quantities. This approach capitalizes on the diverse data modalities of the TPC, allowing for the efficient representation of the distinct features of the 3D events, with no loss in topology uniqueness. Additionally, it leverages the computational efficiency of 2D CNNs and benefits from the extensive availability of pre-trained models. Given the scarcity of real training data for the rare events of interest, simulated events are used to train the models to detect real events. To account for potential distribution shifts when predominantly depending on simulations, significant perturbations are embedded within the simulations. This produces a broad parameter space that works to account for potential physics parameter and detector response variations and uncertainties. These parameter-varied simulations are used to train sensitive 2D CNN object detectors. When combined with 1D histogram peak detection algorithms, this multi-modal detection framework is highly adept at identifying rare, two-particle events in data taken during experiment 21072 at the Facility for Rare Isotope Beams (FRIB), demonstrating a 100% recall for events of interest. We present the methods and outcomes of our investigation and discuss the potential future applications of these techniques.

physics.ins-det↗

arXiv2024

Gemini High-resolution Optical SpecTrograph (GHOST) at Gemini-South: Instrument performance and integration, first science, and next steps

The Gemini South telescope is now equipped with a new high-resolution spectrograph called GHOST (the Gemini High-resolution Optical SpecTrograph). This instrument provides high-efficiency, high-resolution spectra covering 347-1060 nm in a single exposure of either one or two targets simultaneously, along with precision radial velocity spectroscopy utilizing an internal calibration source. It can operate at a spectral element resolving power of either 76000 or 56000, and can reach a SNR$\sim$5 in a 1hr exposure on a V$\sim$20.8 mag target in median site seeing, and dark skies (per resolution element). GHOST was installed on-site in June 2022, and we report performance after full integration to queue operations in November 2023, in addition to scientific results enabled by the integration observing runs. These results demonstrate the ability to observe a wide variety of bright and faint targets with high efficiency and precision. With GHOST, new avenues to explore high-resolution spectroscopy have opened up to the astronomical community. These are described, along with the planned and potential upgrades to the instrument.

astro-ph.IM↗

arXiv2023

Time Projection Chamber for GADGET II

Background: The established GADGET detection system, designed for measuring weak, low-energy $\beta$-delayed proton decays, features a gaseous Proton Detector with MICROMEGAS readout for calorimetric particle detection, surrounded by a Segmented Germanium Array for high-resolution prompt $\gamma$-ray detection. Purpose: To upgrade GADGET's Proton Detector to operate as a compact Time Projection Chamber (TPC) for the detection, 3D imaging and identification of low-energy $\beta$-delayed single- and multi-particle emissions mainly of interest to astrophysical studies. Method: A new high granularity MM board with 1024 pads has been designed, fabricated, installed and tested. A high-density data acquisition system based on Generic Electronics for TPCs has been installed and optimized to record and process the gas avalanche signals collected on the readout pads. The TPC's performance has been tested using a $^{220}$Rn $\alpha$-particle source and cosmic-ray muons. In addition, decay events in the TPC have been simulated by adapting the ATTPCROOT data analysis framework. Further, a novel application of 2D convolutional neural networks for GADGET II event classification is introduced. Results: The GADGET II TPC is capable of detecting and identifying $\alpha$-particles, as well as measuring their track direction, range, and energy. It has also been demonstrated that the GADGET II TPC is capable of tracking cosmic-ray muons. In addition to being one of the first generation of micro pattern gaseous detectors to utilize a resistive anode applied to low-energy nuclear physics, the GADGET II TPC will also be the first TPC surrounded by a high-efficiency array of high-purity germanium $\gamma$-ray detectors. \textbf{Conclusions:} The TPC of GADGET II has been designed, fabricated, tested, and is ready for operation at the FRIB for radioactive beam-line experiments.

physics.ins-det↗

arXiv2021

Reaction Losses of Charged Particles in CsI(Tl) crystals

To efficiently detect energetic light charged particles, it is common to use arrays of energy-loss telescopes involving two or more layers of detection media. As the energy of the particles increases, thicker layers are usually needed. However, carrying out measurements with thick-telescopes may require corrections for the losses due to nuclear reactions induced by the incident particles on nuclei within the detector and for the scattering of incident particles out of the detector, without depositing their full energy in the active material. In this paper, we develop a method for measuring such corrections and determine the reaction and out-scattering losses for data measured with the silicon-CsI(Tl) telescopes of the newly developed HiRA10 array. The extracted efficiencies are in good agreement with model predictions using the GEANT4 reaction loss algorithm for Z=1 and Z=2 isotopes. After correcting for the HiRA10 geometry, a general function that describes the efficiencies from the reaction loss in CsI(Tl) crystals as a function of range is obtained.

physics.ins-det↗

arXiv2020

Value-assigned pulse shape discrimination for neutron detectors

Using the waveforms from a digital electronic system, an offline analysis technique on pulse shape discrimination (PSD) has been developed to improve the neutron-gamma separation in a bar-shaped NE-213 scintillator that couples to a photomultiplier tube (PMT) at each end. The new improved method, called the ``valued-assigned PSD'' (VPSD), assigns a normalized fitting residual to every waveform as the PSD value. This procedure then facilitates the incorporation of longitudinal position dependence of the scintillator, which further enhances the PSD capability of the detector system. In this paper, we use radiation emitted from an AmBe neutron source to demonstrate that the resulting neutron-gamma identification has been much improved when compared to the traditional technique that uses the geometric mean of light outputs from both PMTs. The new method has also been modified and applied to a recent experiment at the National Superconducting Cyclotron Laboratory (NSCL) that uses an analog electronic system.

physics.ins-det↗

arXiv2019

Non-linearity effects on the light-output calibration of light charged particles in CsI(Tl) scintillator crystals

The light output produced by light ions (Z<=4) in CsI(Tl) crystals is studied over a wide range of detected energies (E<=300 MeV). Energy-light calibration data sets are obtained with the 10 cm crystals in the recently upgraded High-Resolution Array (HiRA10). We use proton recoil data from 40,48Ca + CH2 at 28 MeV/u, 56.6 MeV/u, 39 MeV/u and 139.8 MeV/u and data from a dedicated experiment with direct low-energy beams. We also use the punch through points of p, d, and t particles from 40,48Ca + 58,64Ni, 112,124Sn collisions reactions at 139.8 MeV/u. Non-linearities, arising in particular from Tl doping and light collection efficiency in the CsI crystals, are found to significantly affect the light output and therefore the calibration of the detector response for light charged particles, especially the hydrogen isotopes. A new empirical parametrization of the hydrogen light output, L(E,Z=1,A), is proposed to account for the observed effects. Results are found to be consistent for all 48 CsI(Tl) crystals in a cluster of 12 HiRA10 telescopes.

physics.ins-det↗

arXiv2012

The POLARBEAR Experiment

We present the design and characterization of the POLARBEAR experiment. POLARBEAR will measure the polarization of the cosmic microwave background (CMB) on angular scales ranging from the experiment's 3.5 arcminute beam size to several degrees. The experiment utilizes a unique focal plane of 1,274 antenna-coupled, polarization sensitive TES bolometers cooled to 250 milliKelvin. Employing this focal plane along with stringent control over systematic errors, POLARBEAR has the sensitivity to detect the expected small scale B-mode signal due to gravitational lensing and search for the large scale B-mode signal from inflationary gravitational waves. POLARBEAR was assembled for an engineering run in the Inyo Mountains of California in 2010 and was deployed in late 2011 to the Atacama Desert in Chile. An overview of the instrument is presented along with characterization results from observations in Chile.

astro-ph.IM↗

arXiv2011

Ultra High Energy Cosmology with POLARBEAR

Observations of the temperature anisotropy of the Cosmic Microwave Background (CMB) lend support to an inflationary origin of the universe, yet no direct evidence verifying inflation exists. Many current experiments are focussing on the CMB's polarization anisotropy, specifically its curl component (called "B-mode" polarization), which remains undetected. The inflationary paradigm predicts the existence of a primordial gravitational wave background that imprints a unique B-mode signature on the CMB's polarization at large angular scales. The CMB B-mode signal also encodes gravitational lensing information at smaller angular scales, bearing the imprint of cosmological large scale structures (LSS) which in turn may elucidate the properties of cosmological neutrinos. The quest for detection of these signals; each of which is orders of magnitude smaller than the CMB temperature anisotropy signal, has motivated the development of background-limited detectors with precise control of systematic effects. The POLARBEAR experiment is designed to perform a deep search for the signature of gravitational waves from inflation and to characterize lensing of the CMB by LSS. POLARBEAR is a 3.5 meter ground-based telescope with 3.8 arcminute angular resolution at 150 GHz. At the heart of the POLARBEAR receiver is an array featuring 1274 antenna-coupled superconducting transition edge sensor (TES) bolometers cooled to 0.25 Kelvin. POLARBEAR is designed to reach a tensor-to-scalar ratio of 0.025 after two years of observation -- more than an order of magnitude improvement over the current best results, which would test physics at energies near the GUT scale. POLARBEAR had an engineering run in the Inyo Mountains of Eastern California in 2010 and will begin observations in the Atacama Desert in Chile in 2011.

astro-ph.CO↗

arXiv2010

The new generation CMB B-mode polarization experiment: POLARBEAR

We describe the Cosmic Microwave Background (CMB) polarization experiment called Polarbear. This experiment will use the dedicated Huan Tran Telescope equipped with a powerful 1,200-bolometer array receiver to map the CMB polarization with unprecedented accuracy. We summarize the experiment, its goals, and current status.

astro-ph.IM↗