arXiv subjects

A. Barbier

Publications and source records attributed to A. Barbier.

10 recordsLinked to original sources

arXiv2026

Gaia DR3 high radial velocity stars: Genuine fast-moving objects or outliers?

The third Gaia data release includes 33.8 million radial velocity measurements, extending to a magnitude of G_RVS = 14. To reach this magnitude limit, spectra were processed down to a signal-to-noise ratio (S/N) of 2. In this very low S/N regime, noise-induced peaks in the cross-correlation function can result in spurious radial velocity determinations. Quality filters were applied to the dataset to mitigate such artefacts as much as possible prior to publication. Nevertheless, the high radial velocity (HRV) stars -- defined here as those with radial velocities below -500 or above +500 km/s -- are so sparsely populated that even a few hundred spurious measurements can lead to significant contamination. The objectives of the present study are as follows: (i) to confirm or refute the radial velocity values of the order of one hundred Gaia DR3 HRV stars, (ii) to evaluate the rate of spurious radial velocities in the Gaia DR3 catalogue as a function of S/N and radial velocity, and (iii) to examine the properties of the genuine HRV stars. A total of 134 Gaia DR3 HRV stars were observed using the SOPHIE and UVES spectrographs. (abridged) Ground-based measurements confirm the Gaia DR3 radial velocities of 104 out of our 134 targets, and they refute those of the remaining 30. The combination of these data with the spectroscopic surveys mentioned above enabled an assessment of the rate of spurious measurements as a function of S/N and across three intervals of absolute value of the radial velocity. (abridged) The majority of these stars follow retrograde orbits. Their location in the energy-vertical component of the angular momentum diagram coincides with the region where several structures associated with past merging events have been identified: Sequoia, Arjuna and I'itoi, Antaeus, ED-2, and ED-3. It is likely that most of these HRV stars were accreted.

astro-ph.SR↗

arXiv2024

Discovery of a dormant 33 solar-mass black hole in pre-release Gaia astrometry

Gravitational waves from black-hole merging events have revealed a population of extra-galactic BHs residing in short-period binaries with masses that are higher than expected based on most stellar evolution models - and also higher than known stellar-origin black holes in our Galaxy. It has been proposed that those high-mass BHs are the remnants of massive metal-poor stars. Gaia astrometry is expected to uncover many Galactic wide-binary systems containing dormant BHs, which may not have been detected before. The study of this population will provide new information on the BH-mass distribution in binaries and shed light on their formation mechanisms and progenitors. As part of the validation efforts in preparation for the fourth Gaia data release (DR4), we analysed the preliminary astrometric binary solutions, obtained by the Gaia Non-Single Star pipeline, to verify their significance and to minimise false-detection rates in high-mass-function orbital solutions. The astrometric binary solution of one source, Gaia BH3, implies the presence of a 32.70 \pm 0.82 M\odot BH in a binary system with a period of 11.6 yr. Gaia radial velocities independently validate the astrometric orbit. Broad-band photometric and spectroscopic data show that the visible component is an old, very metal-poor giant of the Galactic halo, at a distance of 590 pc. The BH in the Gaia BH3 system is more massive than any other Galactic stellar-origin BH known thus far. The low metallicity of the star companion supports the scenario that metal-poor massive stars are progenitors of the high-mass BHs detected by gravitational-wave telescopes. The Galactic orbit of the system and its metallicity indicate that it might belong to the Sequoia halo substructure. Alternatively, and more plausibly, it could belong to the ED-2 stream, which likely originated from a globular cluster that had been disrupted by the Milky Way.

astro-ph.GA↗

arXiv2023

Gaia Focused Product Release: Sources from Service Interface Function image analysis -- Half a million new sources in omega Centauri

Gaia's readout window strategy is challenged by very dense fields in the sky. Therefore, in addition to standard Gaia observations, full Sky Mapper (SM) images were recorded for nine selected regions in the sky. A new software pipeline exploits these Service Interface Function (SIF) images of crowded fields (CFs), making use of the availability of the full two-dimensional (2D) information. This new pipeline produced half a million additional Gaia sources in the region of the omega Centauri ($\omega$ Cen) cluster, which are published with this Focused Product Release. We discuss the dedicated SIF CF data reduction pipeline, validate its data products, and introduce their Gaia archive table. Our aim is to improve the completeness of the {\it Gaia} source inventory in a very dense region in the sky, $\omega$ Cen. An adapted version of {\it Gaia}'s Source Detection and Image Parameter Determination software located sources in the 2D SIF CF images. We validated the results by comparing them to the public {\it Gaia} DR3 catalogue and external Hubble Space Telescope data. With this Focused Product Release, 526\,587 new sources have been added to the {\it Gaia} catalogue in $\omega$ Cen. Apart from positions and brightnesses, the additional catalogue contains parallaxes and proper motions, but no meaningful colour information. While SIF CF source parameters generally have a lower precision than nominal {\it Gaia} sources, in the cluster centre they increase the depth of the combined catalogue by three magnitudes and improve the source density by a factor of ten. This first SIF CF data publication already adds great value to the {\it Gaia} catalogue. It demonstrates what to expect for the fourth {\it Gaia} catalogue, which will contain additional sources for all nine SIF CF regions.

astro-ph.SR↗

arXiv2023

Gaia Focused Product Release: A catalogue of sources around quasars to search for strongly lensed quasars

Context. Strongly lensed quasars are fundamental sources for cosmology. The Gaia space mission covers the entire sky with the unprecedented resolution of $0.18$" in the optical, making it an ideal instrument to search for gravitational lenses down to the limiting magnitude of 21. Nevertheless, the previous Gaia Data Releases are known to be incomplete for small angular separations such as those expected for most lenses. Aims. We present the Data Processing and Analysis Consortium GravLens pipeline, which was built to analyse all Gaia detections around quasars and to cluster them into sources, thus producing a catalogue of secondary sources around each quasar. We analysed the resulting catalogue to produce scores that indicate source configurations that are compatible with strongly lensed quasars. Methods. GravLens uses the DBSCAN unsupervised clustering algorithm to detect sources around quasars. The resulting catalogue of multiplets is then analysed with several methods to identify potential gravitational lenses. We developed and applied an outlier scoring method, a comparison between the average BP and RP spectra of the components, and we also used an extremely randomised tree algorithm. These methods produce scores to identify the most probable configurations and to establish a list of lens candidates. Results. We analysed the environment of 3 760 032 quasars. A total of 4 760 920 sources, including the quasars, were found within 6" of the quasar positions. This list is given in the Gaia archive. In 87\% of cases, the quasar remains a single source, and in 501 385 cases neighbouring sources were detected. We propose a list of 381 lensed candidates, of which we identified 49 as the most promising. Beyond these candidates, the associate tables in this Focused Product Release allow the entire community to explore the unique Gaia data for strong lensing studies further.

astro-ph.GA↗

arXiv2023

Gaia Focused Product Release: Radial velocity time series of long-period variables

The third Gaia Data Release (DR3) provided photometric time series of more than 2 million long-period variable (LPV) candidates. Anticipating the publication of full radial-velocity (RV) in DR4, this Focused Product Release (FPR) provides RV time series for a selection of LPVs with high-quality observations. We describe the production and content of the Gaia catalog of LPV RV time series, and the methods used to compute variability parameters published in the Gaia FPR. Starting from the DR3 LPVs catalog, we applied filters to construct a sample of sources with high-quality RV measurements. We modeled their RV and photometric time series to derive their periods and amplitudes, and further refined the sample by requiring compatibility between the RV period and at least one of the $G$, $G_{\rm BP}$, or $G_{\rm RP}$ photometric periods. The catalog includes RV time series and variability parameters for 9\,614 sources in the magnitude range $6\lesssim G/{\rm mag}\lesssim 14$, including a flagged top-quality subsample of 6\,093 stars whose RV periods are fully compatible with the values derived from the $G$, $G_{\rm BP}$, and $G_{\rm RP}$ photometric time series. The RV time series contain a mean of 24 measurements per source taken unevenly over a duration of about three years. We identify the great most sources (88%) as genuine LPVs, with about half of them showing a pulsation period and the other half displaying a long secondary period. The remaining 12% consists of candidate ellipsoidal binaries. Quality checks against RVs available in the literature show excellent agreement. We provide illustrative examples and cautionary remarks. The publication of RV time series for almost 10\,000 LPVs constitutes, by far, the largest such database available to date in the literature. The availability of simultaneous photometric measurements gives a unique added value to the Gaia catalog (abridged)

astro-ph.SR↗

arXiv2022

Solid State Detectors and Tracking for Snowmass

Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03).

physics.ins-det↗

arXiv2022

Novel Sensors for Particle Tracking: a Contribution to the Snowmass Community Planning Exercise of 2021

Five contemporary technologies are discussed in the context of their potential roles in particle tracking for future high energy physics applications. These include sensors of the 3D configuration, in both diamond and silicon, submicron-dimension pixels, thin film detectors, and scintillating quantum dots in gallium arsenide. Drivers of the technologies include radiation hardness, excellent position, vertex, and timing resolution, simplified integration, and optimized power, cost, and material.

physics.ins-det↗

arXiv2018

The NIKA2 instrument at 30-m IRAM telescope: performance and results

The New IRAM KID Arrays 2 (NIKA2) consortium has just finished installing and commissioning a millimetre camera on the IRAM 30 m telescope. It is a dual-band camera operating with three frequency multiplexed kilo-pixels arrays of Lumped Element Kinetic Inductance Detectors (LEKID) cooled at 150 mK, designed to observe the intensity and polarisation of the sky at 260 and 150 GHz (1.15 and 2 mm). NIKA2 is today an IRAM resident instrument for millimetre astronomy, such as Intra Cluster Medium from intermediate to distant clusters and so for the follow-up of Planck satellite detected clusters, high redshift sources and quasars, early stages of star formation and nearby galaxies emission. We present an overview of the instrument performance as it has been evaluated at the end of the commissioning phase.

astro-ph.IM↗

arXiv2012

Surface composition of BaTiO3/SrTiO3(001) films grown by atomic oxygen plasma assisted molecular beam epitaxy

We have investigated the growth of BaTiO3 thin films deposited on pure and 1% Nb-doped SrTiO3(001) single crystals using atomic oxygen assisted molecular beam epitaxy (AO-MBE) and dedicated Ba and Ti Knudsen cells. Thicknesses up to 30 nm were investigated for various layer compositions. We demonstrate 2D growth and epitaxial single crystalline BaTiO3 layers up to 10 nm before additional 3D features appear; lattice parameter relaxation occurs during the first few nanometers and is completed at »10 nm. The presence of a Ba oxide rich top layer that probably favors 2D growth is evidenced for well crystallized layers. We show that the Ba oxide rich top layer can be removed by chemical etching. The present work stresses the importance of stoichiometry and surface composition of BaTiO3 layers, especially in view of their integration in devices.

cond-mat.mtrl-sci↗

arXiv2003

Structure of self-organized Fe clusters grown on Au(111) analyzed by Grazing Incidence X-Ray Diffraction

We report a detailed investigation of the first stages of the growth of self-organized Fe clusters on the reconstructed Au(111) surface by grazing incidence X-ray diffraction. Below one monolayer coverage, the Fe clusters are in "local epitaxy" whereas the subsequent layers adopt first a strained fcc lattice and then a partly relaxed bcc(110) phase in a Kurdjumov-Sachs epitaxial relationship. The structural evolution is discussed in relation with the magnetic properties of the Fe clusters.

cond-mat.mtrl-sci↗