arXiv subjects

A. Barthelemy

Publications and source records attributed to A. Barthelemy.

At least 19 recordsLinked to original sources

arXiv2026

Euclid preparation. LXXXV. Toward a DR1 application of higher-order weak lensing statistics

This is the second paper in the HOWLS (higher-order weak lensing statistics) series exploring the usage of non-Gaussian statistics for cosmology inference within Euclid. With respect to our first paper, we develop a full tomographic analysis based on realistic photometric redshifts that allows us to derive Fisher forecasts in the ($σ_8$, $w_0$) plane for a Euclid-like data release 1 (DR1) setup. We find that the five higher-order statistics (HOS) that satisfy the Gaussian likelihood assumption of the Fisher formalism (one-point probability distribution function, $\ell$1-norm, peak counts, Minkowski functionals, and Betti numbers) each outperform the shear two-point correlation functions by a factor of $2.5$ on the $w_0$ forecasts, with only marginal improvement when used in combination with two-point estimators, suggesting that every HOS is able to retrieve both the non-Gaussian and Gaussian information of the matter density field. The similar performance of the different estimators is explained by a homogeneous use of multi-scale and tomographic information, optimized to lower computational costs. These results hold for the three mass mapping techniques of the Euclid pipeline, aperture mass, Kaiser--Squires, and Kaiser--Squires plus, and they are unaffected by the application of realistic star masks. Finally, we explored the use of HOS with the Bernardeau--Nishimichi--Taruya (BNT) nulling scheme approach, finding promising results toward applying physical scale cuts to HOS.

astro-ph.CO↗

arXiv2024

Euclid. I. Overview of the Euclid mission

The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.

astro-ph.CO↗

arXiv2023

Euclid Preparation. XXVIII. Forecasts for ten different higher-order weak lensing statistics

Recent cosmic shear studies have shown that higher-order statistics (HOS) developed by independent teams now outperform standard two-point estimators in terms of statistical precision thanks to their sensitivity to the non-Gaussian features of large-scale structure. The aim of the Higher-Order Weak Lensing Statistics (HOWLS) project is to assess, compare, and combine the constraining power of ten different HOS on a common set of $Euclid$-like mocks, derived from N-body simulations. In this first paper of the HOWLS series, we computed the nontomographic ($Ω_{\rm m}$, $σ_8$) Fisher information for the one-point probability distribution function, peak counts, Minkowski functionals, Betti numbers, persistent homology Betti numbers and heatmap, and scattering transform coefficients, and we compare them to the shear and convergence two-point correlation functions in the absence of any systematic bias. We also include forecasts for three implementations of higher-order moments, but these cannot be robustly interpreted as the Gaussian likelihood assumption breaks down for these statistics. Taken individually, we find that each HOS outperforms the two-point statistics by a factor of around two in the precision of the forecasts with some variations across statistics and cosmological parameters. When combining all the HOS, this increases to a $4.5$ times improvement, highlighting the immense potential of HOS for cosmic shear cosmological analyses with $Euclid$. The data used in this analysis are publicly released with the paper.

astro-ph.CO↗

arXiv2019

Random scattering and alternating projection optimization for active phase control of a laser beam array

A fraction of a laser beam array, whose unknown phase relationships must be set to prescribed values, is launched into a scattering media with random transmission. The resulting output speckle pattern is sampled by an array of photodiodes measuring the local light intensity. The data feed an innovative optimization process which controls a phase modulator array. Few iterations of the opto-numeric loop lead to efficient and fast phase locking on any desired wavefront.

physics.optics↗

arXiv2018

Full field electron spectromicroscopy applied to ferroelectric materials

The application of PhotoEmission Electron Microscopy (PEEM) and Low Energy Electron Microscopy (LEEM) techniques to the study of the electronic and chemical structure of ferroelectric materials is reviewed. Electron optics in both techniques gives spatial resolution of a few tens of nanometres. PEEM images photoelectrons whereas LEEM images reflected and elastically backscattered electrons. Both PEEM and LEEM can be used in direct and reciprocal space imaging. Together, they provide access to surface charge, work function, topography, chemical mapping, surface crystallinity and band structure. Examples of applications for the study of ferroelectric thin films and single crystals are presented.

cond-mat.mtrl-sci↗

arXiv2017

Strain and Magnetic Field Induced Spin-Structure Transitions in Multiferroic BiFeO3

The magnetic-field-dependent spin ordering of strained BiFeO3 films is determined using nuclear resonant scattering and Raman spectroscopy. The critical field required to destroy the cycloidal modulation of the Fe spins is found to be significantly lower than in the bulk, with appealing implications for field-controlled spintronic and magnonic devices.

cond-mat.mtrl-sci↗

arXiv2017

Tuning up or down the critical thickness in LaAlO3/SrTiO3 through in situ deposition of metal overlayers

The quasi 2D electron system (q2DES) that forms at the interface between LaAlO3 and SrTiO3 has attracted much attention from the oxide electronics community. One of its hallmark features is the existence of a critical LaAlO3 thickness of 4 unit-cells (uc) for interfacial conductivity to emerge. In this paper, the chemical, electronic, and transport properties of LaAlO3/SrTiO3 samples capped with different metals grown in a system combining pulsed laser deposition, sputtering, and in situ X-ray photoemission spectroscopy are investigated. The results show that for metals with low work function a q2DES forms at 1-2 uc of LaAlO3 and is accompanied by a partial oxidation of the metal, a phenomenon that affects the q2DES properties and triggers the formation of defects. In contrast, for noble metals, the critical thickness is increased above 4 uc. The results are discussed in terms of a hybrid mechanism that incorporates electrostatic and chemical effects.

cond-mat.mtrl-sci↗

arXiv2017

Depth profiling charge accumulation from a ferroelectric into a doped Mott insulator

The electric field control of functional properties is a crucial goal in oxide-based electronics. Non-volatile switching between different resistivity or magnetic states in an oxide channel can be achieved through charge accumulation or depletion from an adjacent ferroelectric. However, the way in which charge distributes near the interface between the ferroelectric and the oxide remains poorly known, which limits our understanding of such switching effects. Here we use a first-of-a-kind combination of scanning transmission electron microscopy with electron energy loss spectroscopy, near-total-reflection hard X-ray photoemission spectroscopy, and ab-initio theory to address this issue. We achieve a direct, quantitative, atomic-scale characterization of the polarization-induced charge density changes at the interface between the ferroelectric BiFeO3 and the doped Mott insulator Ca1-xCexMnO3, thus providing insight on how interface-engineering can enhance these switching effects.

cond-mat.mtrl-sci↗

arXiv2017

Large elasto-optic effect and reversible electrochromism in multiferroic BiFeO3

The control of optical fields is usually achieved through the electro-optic or acousto-optic effect in single-crystal ferroelectric or polar compounds such as LiNbO3 or quartz. In recent years, tremendous progress has been made in ferroelectric oxide thin film technology - a field which is now a strong driving force in areas such as electronics, spintronics and photovoltaics. Here, we apply epitaxial strain engineering to tune the optical response of BiFeO3 thin films, and find a very large variation of the optical index with strain, corresponding to an effective elasto-optic coefficient larger than that of quartz. We observe a concomitant strain-driven variation in light absorption - reminiscent of piezochromism - which we show can be manipulated by an electric field. This constitutes an electrochromic effect that is reversible, remanent and not driven by defects. These findings broaden the potential of multiferroics towards photonics and thin film acousto-optic devices, and suggest exciting device opportunities arising from the coupling of ferroic, piezoelectric and optical responses.

cond-mat.mtrl-sci↗

arXiv2017

Hybridization-controlled charge transfer and induced magnetism at correlated oxide interfaces

At interfaces between conventional materials, band bending and alignment are classically controlled by differences in electrochemical potential. Applying this concept to oxides in which interfaces can be polar and cations may adopt a mixed valence has led to the discovery of novel two-dimensional states between simple band insulators such as LaAlO3 and SrTiO3. However, many oxides have a more complex electronic structure, with charge, orbital and/or spin orders arising from correlations between transition metal and oxygen ions. Strong correlations thus offer a rich playground to engineer functional interfaces but their compatibility with the classical band alignment picture remains an open question. Here we show that beyond differences in electron affinities and polar effects, a key parameter determining charge transfer at correlated oxide interfaces is the energy required to alter the covalence of the metaloxygen bond. Using the perovskite nickelate (RNiO3) family as a template, we probe charge reconstruction at interfaces with gadolinium titanate GdTiO3. X-ray absorption spectroscopy shows that the charge transfer is thwarted by hybridization effects tuned by the rare-earth (R) size. Charge transfer results in an induced ferromagnetic-like state in the nickelate, exemplifying the potential of correlated interfaces to design novel phases. Further, our work clarifies strategies to engineer two-dimensional systems through the control of both doping and covalence.

cond-mat.str-el↗

arXiv2017

Structural, magnetic, and electronic properties of GdTiO3 Mott insulator thin films grown by pulsed laser deposition

We report on the optimization process to synthesize epitaxial thin films of GdTiO3 on SrLaGaO4 substrates by pulsed laser deposition. Optimized films are free of impurity phases and are fully strained. They possess a magnetic Curie temperature TC = 31.8 K with a saturation magnetization of 4.2 muB per formula unit at 10 K. Transport measurements reveal an insulating response, as expected. Optical spectroscopy indicates a band gap of 0.7 eV, comparable to the bulk value. Our work adds ferrimagnetic orthotitanates to the palette of perovskite materials for the design of emergent strongly correlated states at oxide interfaces using a versatile growth technique such as pulsed laser deposition.

cond-mat.str-el↗

arXiv2017

Competition between electron pairing and phase coherence in superconducting interfaces

The large diversity of exotic electronic phases displayed by two-dimensional superconductors confronts physicists with new challenges. These include the recently discovered quantum Griffith singularity in atomic Ga films, topological phases in proximized topological insulators and unconventional Ising pairing in transition metal dichalcogenide layers. In LaAlO3/SrTiO3 heterostructures, a gate tunable superconducting electron gas is confined in a quantum well at the interface between two insulating oxides. Remarkably, the gas coexists with both magnetism and strong Rashba spin-orbit coupling and is a candidate system for the creation of Majorana fermions. However, both the origin of superconductivity and the nature of the transition to the normal state over the whole doping range remain elusive. Missing such crucial information impedes harnessing this outstanding system for future superconducting electronics and topological quantum computing. Here we show that the superconducting phase diagram of LaAlO3/SrTiO3 is controlled by the competition between electron pairing and phase coherence. Through resonant microwave experiments, we measure the superfluid stiffness and infer the gap energy as a function of carrier density. Whereas a good agreement with the Bardeen-Cooper-Schrieffer (BCS) theory is observed at high carrier doping, we find that the suppression of Tc at low doping is controlled by the loss of macroscopic phase coherence instead of electron pairing as in standard BCS theory. We find that only a very small fraction of the electrons condenses into the superconducting state and propose that this corresponds to the weak filling of a high-energy dxz/yz band, more apt to host superconductivity

cond-mat.supr-con↗

arXiv2017

A high-temperature superconducting weak-link defined by ferroelectric field-effect

In all-oxide ferroelectric (FE) - superconductor (S) bilayers, due to the low carrier concentration of oxides compared to transition metals, the FE interfacial polarization charges induce an accumulation (or depletion) of charge carriers in the S. This leads either to an enhancement or a depression of its critical temperature depending on FE polarization direction.Here we exploit this effect at a local scale to define planar weak-links in high-temperature superconducting wires. This is realized in BiFeO3(FE)/YBa2Cu3O7(S)bilayers in which the remnant FE domain structure is written at will by locally applying voltage pulses with a conductive-tip atomic force microscope. In this fashion, the FE domain pattern defines a spatial modulation of superconductivity. This allows us to write a device whose electrical transport shows different temperature regimes and magnetic field matching effects that are characteristic of Josephson coupled weak-links. This illustrates the potential of the ferroelectric approach for the realization of high-temperature superconducting devices.

cond-mat.supr-con↗

arXiv2016

Highly efficient and tuneable spin-to-charge conversion through Rashba coupling at oxide interfaces

The spin-orbit interaction couples the electrons' motion to their spin. Accordingly, passing a current in a material with strong spin-orbit coupling generates a transverse spin current (spin Hall effect, SHE) and vice-versa (inverse spin Hall effect, ISHE). The emergence of SHE and ISHE as charge-to-spin interconversion mechanisms offers a variety of novel spintronics functionalities and devices, some of which do not require any ferromagnetic material. However, the interconversion efficiency of SHE and ISHE (spin Hall angle) is a bulk property that rarely exceeds ten percent, and does not take advantage of interfacial and low-dimensional effects otherwise ubiquitous in spintronics hetero- and mesostructures. Here, we make use of an interface-driven spin-orbit coupling mechanism - the Rashba effect - in the oxide two-dimensional electron system (2DES) LaAlO3/SrTiO3 to achieve spin-to-charge conversion with unprecedented efficiency. Through spin-pumping, we inject a spin current from a NiFe film into the oxide 2DES and detect the resulting charge current, which can be strongly modulated by a gate voltage. We discuss the amplitude of the effect and its gate dependence on the basis of the electronic structure of the 2DES.

cond-mat.mtrl-sci↗

arXiv2015

Field-effect control of superconductivity and Rashba spin-orbit coupling in top-gated LaAlO3/SrTiO3 devices

The recent development in the fabrication of artificial oxide heterostructures opens new avenues in the field of quantum materials by enabling the manipulation of the charge, spin and orbital degrees of freedom. In this context, the discovery of two-dimensional electron gases (2-DEGs) at LAlO3/SrTiO3 interfaces, which exhibit both superconductivity and strong Rashba spin-orbit coupling (SOC), represents a major breakthrough. Here, we report on the realisation of a field-effect LaAlO3/SrTiO3 device, whose physical properties, including superconductivity and SOC, can be tuned over a wide range by a top-gate voltage. We derive a phase diagram, which emphasises a field-effect-induced superconductor-to-insulator quantum phase transition. Magneto-transport measurements indicate that the Rashba coupling constant increases linearly with electrostatic doping. Our results pave the way for the realisation of mesoscopic devices, where these two properties can be manipulated on a local scale by means of top-gates.

cond-mat.supr-con↗

arXiv2013

Thickness-dependent polarization of strained BiFeO3 films with constant tetragonality

We measure the remnant polarization of ferroelectric domains in BiFeO3 films down to 3.6 nm using low energy electron and photoelectron emission microscopy. The measured polarization decays strongly below a critical thickness of 5-7 nm predicted by continuous medium theory whereas the tetragonal distortion does not change. We resolve this apparent contradiction using first-principles-based effective Hamiltonian calculations. In ultra thin films the energetics of near open circuit electrical boundary conditions, i.e. unscreened depolarizing field, drive the system through a phase transition from single out-of-plane polarization to a nanoscale stripe domains, giving rise to an average remnant polarization close to zero as measured by the electron microscopy whilst maintaining the relatively large tetragonal distortion imposed by the non-zero polarization state of each individual domain.

cond-mat.mtrl-sci↗

arXiv2011

Multiferroic phase transition near room temperature in BiFeO3 films

In multiferroic BiFeO3 thin films grown on highly mismatched LaAlO3 substrates, we reveal the coexistence of two differently distorted polymorphs that leads to striking features in the temperature dependence of the structural and multiferroic properties. Notably, the highly distorted phase quasi-concomitantly presents an abrupt structural change, transforms from a hard to a soft ferroelectric and transitions from antiferromagnetic to paramagnetic at 360+/-20 K. These coupled ferroic transitions just above room temperature hold promises of giant piezoelectric, magnetoelectric and piezomagnetic responses, with potential in many applications fields.

cond-mat.mtrl-sci↗

arXiv2010

Unveiling a two-dimensional electron gas with universal subbands at the surface of SrTiO3

Similar to silicon that is the basis of conventional electronics, strontium titanate (SrTiO3) is the bedrock of the emerging field of oxide electronics. SrTiO3 is the preferred template to create exotic two-dimensional (2D) phases of electron matter at oxide interfaces, exhibiting metal-insulator transitions, superconductivity, or large negative magnetoresistance. However, the physical nature of the electronic structure underlying these 2D electron gases (2DEGs) remains elusive, although its determination is crucial to understand their remarkable properties. Here we show, using angle-resolved photoemission spectroscopy (ARPES), that there is a highly metallic universal 2DEG at the vacuum-cleaved surface of SrTiO3, independent of bulk carrier densities over more than seven decades, including the undoped insulating material. This 2DEG is confined within a region of ~5 unit cells with a sheet carrier density of ~0.35 electrons per a^2 (a is the cubic lattice parameter). We unveil a remarkable electronic structure consisting on multiple subbands of heavy and light electrons. The similarity of this 2DEG with those reported in SrTiO3-based heterostructures and field-effect transistors suggests that different forms of electron confinement at the surface of SrTiO3 lead to essentially the same 2DEG. Our discovery provides a model system for the study of the electronic structure of 2DEGs in SrTiO3-based devices, and a novel route to generate 2DEGs at surfaces of transition-metal oxides.

cond-mat.mtrl-sci↗